Safety always comes first. Always wear safety equipment and use tools the proper way. Avoid taking off the guards on power tools; they are meant to protect you. You don’t want to start in your workshop and end in a hospital bed.

TIP! Test the stain before you apply it to the wood you are using in your project. This will give you an idea of what it will look like on the finished project.

This article delves into the different techniques to become a woodworker. The tips here can help you master the craft. Keep reading if you want to learn more about this wonderful art form.

Select the appropriate kind of wood for your projects. When woodworking, there are some woods which can’t handle the stress other woods can. If you aren’t positive of what type of wood to use, you should first gain an understanding of them.

TIP! If you plan on renting an unfamiliar tool, ask the company if they can provide a short tutorial. Oftentimes, they have someone available to train you with the tool.

Create your own sanding blocks. For each sandpaper grit that you usually use, cut six blocks from a scrap of three-quarter inch plywood. Make sure they are about 2.5″ x 4.75.” Spray adhesive on your blocks and also the cork square tile. Stick a block on the cork and cut it flush with a knife. This piece should then fit you hand fairly well and be secure enough to not slip. At the end, trim the sandpaper and label each block.

You want to know the different characteristics of the wood you’re going to use, especially before the staining process. Paint grade means the wood is of lower quality, for example, while stain grade means it has a better grain pattern for staining. Veener and particleboard are different too; particleboard may absorb too much stain, and veener may not absorb enough. Getting the right wood helps ensure your project turns out the way you expect.

Crosscut Guide

Put some more spring in your grip. There are times when you may need to use a spring clamp, but you might only have the use of one hand. It’s hard to open them with just one hand. There is a way to make it easier. Before starting to glue a large project, arrange all the clamps you will be using onto some scrap wood while both of your hands are free. This makes it possible to use them with only one hand when you need to.

TIP! Make sure to properly protect your ears. Woodworking can be very loud.

Use stair gauges as a crosscut guide. Clamp these gauges to the carpenter’s square you have and be sure they’re matching up to the stair jack’s run and rise. Next, mark your notches using the guide you have set. If you place the on the tongue that’s on your carpenter’s square, this means that together you can use this as a good crosscut guide for the circular saw.

Lighting is important within your work space. Woodworking is something that requires you to know how to measure accurately. Not only that, cutting the wood requires sharp tools. This will reduce any imperfections in your creations.

TIP! Incorporate your woodworking skills in yard projects. You can build things like a beautiful deck, and a place to feed birds.

Be realistic about your budget. Many people are surprised at how much it costs to make some woodworking projects. It’s easy to get so excited to make something and then not have the money to complete the project. Do your homework before you start to avoid surprises.

There always comes a time that something will fly into your eye when you least expect it. Therefore, always wear your goggles to avoid an accident. If they don’t fit right or impede your vision, get another pair.

TIP! Prior to beginning a first woodworking task, several basic tools must be on hand. The first tool you get is going to be a hammer.

If you need to buy or rent tools, include that cost in your budget. It’s too easy to overlook this. If your project does indeed require extra tools you don’t have on hand, it can break your budget if you don’t plan for them.

When sanding, just use light pressure. If you apply too much pressure, you can easily find that you’re left with a wood surface that is very uneven. It’s important to learn which sandpaper grit should be used because this will allow you to sand easily without needing to be forceful. Use circular motions with light pressure to sand.

TIP! Make a sanding block that is reusable. You will gain more control when sanding and it is cheaper than buying the manufactured version.

No woodworking shop should be without a stair gauge. They are typically used for laying out stair jacks, but can also prove useful for clamping a carpenters square. This can make a carpenter’s square serve as a guide for a circular saw. When you use the square, every cut will be perfect.

Wet the surface of the wood before you begin sanding. That forces the grain to rise. This will allow you to eliminate fine scratches. This will allow you to have a professional looking woodworking project when you’re finished. It could also make you sure you’re not doing extra work later.

TIP! Television can be a surprisingly good resource. Watch a few woodworking programs on TV.

It is a good idea to keep a small ruler in your pocket, but you may find it falls out when you bend over because of the length. Instead of wood, choose a metal rule and keep it with your magnet. The magnet will ensure the ruler stays in your pocket.

You can make your own custom sized sanding blocks. Simply cut the wood to the size and shape you need for the job. Use a spray adhesive to attach your sandpaper to your block of wood. This will give you an optimal sized sanding block.

Golf Tee

Think about renting tools before buying them. Renting a tool once or twice is a chance for you to find out if you really need it or would actually use it. The renter may give you demonstrations that will help you learn the proper way to use the equipment safely.

TIP! If you are a woodworking newbie, there’s no need to buy all the tools at once. Rather, look into borrowing tools from family or friends.

If your door hinges are loose, you can use a golf tee to fix them. Remove the hinges and the door. Then, in the hole where the screws were, lightly hammer a common golf tee into the hole. Then, cut the golf tee’s excess off and reinstall the door. The golf tee allows a screw to have something it can bite into.

Woodworking shops use many different varieties of saws. Circular saws are for short cuts, miter saws are for angled cuts, and table saws are for straight, long cuts. Intricate cuts require a scroll saw or a jigsaw. A traditional saw is good for the times when you cannot use a circular saw.

TIP! You can try repeating projects over and over again. In order to perform well at certain woodworking projects, it helps to practice.

Apply your woodworking skills on yard projects. Consider building a bird feeder, or maybe a deck. The birds you attract should keep the insects from bugging you while you relax and plan out your next project. If you are a woodworking professional, try displaying your work to clients by meeting them on your deck.

Think of how you will use your shop when setting up your working space. Don’t get it stuffed with a bunch of equipment that you can’t easily move around. Lots of space between machines will be needed. Space is imperative when setting up your shop. You shop will be a safer one and you will be more productive.

TIP! Keep dust to a minimum in your shop. Hardwood dust counts as more of an issue than softwood dust; however that is not a hard rule.

Be on the lookout for people that want to sell their house. You can increase the resale price of your house, and even make some hobby cash, with small woodworking projects. Your potential projects could range from simple mailbox posts to entire kitchen renovations.

PBS oftentimes airs several types of shows that assist those interested in DIY projects of all sorts. These shows will teach you woodworking tips. If you learn best by watching step by step instructions rather than reading them, this can be a great learning opportunity for you. If you happen to miss an episode, you can catch it on the Internet.


There are some essential hand tools that you should get before beginning your initial woodworking project. A necessary tool for any woodworker is a hammer. Just a simple claw hammer will do nicely. Choose a hammer that sits well in your grasp. Make sure you don’t get one too heavy or too light.


There’s much to learn when it comes to woodworking. The good news is that you’ve got these great tips here that can help you. Now, just keep learning and put all you’ve read to good use.

Business meets nature