For crosscut guides use a stair gauge. Clamp them to carpenter’s squares and be sure they match the runs and rises of the stair jacks. Be sure to mark the location of the notches. When you combine them on your carpenter’s square’s tongue, they’ll guide your crosscuts for you.

TIP! Before you even begin sawing anything, check the blade to make sure it’s in good condition. A dull blade will make it terribly difficult to saw.

There are many people who find wood to be a great medium to work with. Woodworking creates creative and sometimes spectacular items, from tables to bookcases. However, you must understand how to be a good woodworker. Read ahead and gain some good ideas that can help boost your enjoyment with woodworking.

Add some extra spring to your grip. There are a few times you need a spring clamp, when you can only use one hand. They are not designed to be opened with one hand. There are ways to make this easier. Prior to starting glue-ups, gather your clamps and place them on one piece of wood with both hands. This makes opening them with one hand unnecessary.

TIP! Don’t be a perfectionist when using tape measures. Practicing on story sticks is effective and gives you confidence to work your way to that final cut on your project piece.

Pre-stain wood conditioners should be used prior to staining any wood project. If you use a pre-stain conditioner, you will be less likely to notice any blotches or irregularities in your finished project. These conditioners are going to help smooth out the wood so that the stain can get into it more evenly.

Have lots of lighting in your work space. You must measure accurately for success in woodworking. Additionally, you are working around dangerous, sharp tools. All these activities require you to be able to see well so that you will not make any mistakes or sustain any injury.

Crosscut Guide

It is important to choose the correct wood for your particular woodworking project. For table tops, avoid use pine or other soft woods because the top will get scratched easily. Keep all the different types of wood in mind as you think about how the color will look once it’s completed.

TIP! Keep an eye out for used furniture that you could pick up. Sometimes you can find wood to recycle for cheap or free.

Use stair gauges as a crosscut guide. Clamp them to the carpenter’s square, then ensure that they match up with the jack’s run and rise. Then use a pencil to mark the notches. You have a great crosscut guide when you put each of them on the carpenter’s square together.

Don’t push too hard when you sand. If you apply too much pressure, you can easily find that you’re left with a wood surface that is very uneven. If you’re using the right sand paper grit, the pressure should not matter. Use a circular motion to sand.

TIP! Make your own sanding block that you can use time and time again. Sanding blocks help save your hands from too much wear and tear, and they also let you do your job better.

Whenever you plan to cut a narrow piece of wood, don’t use your fingers as a guide! Instead, use a piece of scrap wood to safely push the lumber through your table saw. This will assure you keep your fingers.

Know that you have enough lighting in your woodworking shop. Any time you are sanding, painting or staining a project you need lots of bright light. This will help a lot with sanding, as well. Extra lighting helps you make sure you apply the stain evenly.

TIP! A stair gauge can be a great guide for a circular saw. They’re normally used to mark stair jacks.

When using laminate in your woodworking projects, one of the best ways to trim the laminate is using tin snips. This tool is intended to cut metal, so it easily slices through laminates, which greatly reduces the energy needed. This will improve the overall quality of your project.

Prior to doing any sanding, make sure to get the target surface wet. This will raise the grain. This helps to get rid of small scratches in your finished piece. This will provide your final project with a professional look. In addition, this can save unnecessary work in the future.

TIP! Prior to applying stain to wood, make sure the surface is properly prepared. Pre-stain conditioners can help with this.

Are you finding it hard to be able to reach a screw that you need to tighten? This is where your toolbox comes in handy. You can use a 12-point socket and a long-handled screwdriver. Place the socket on the screwdriver, and then attach it onto your best ratchet.

Before starting a woodworking project, make sure you know all the steps you must take. Do not let yourself get to a point of building the project before you realize a mistake. Read them over many times until you know what you’re doing.

TIP! Practice before beginning a project that uses a new technique or tool. Find some wood you’re not using for a project and start to work on it.

Protect your feet by wearing sturdy footwear while woodworking. Your workshop is full of things that can injure your feet. Stepping on a nail can really hurt your feet! You need to have shoes that are study enough to protect you when working in your woodworking shop.

Try not to buy too much wood or other material. When you get too much stuff, you are likely to discover that you don’t actually need it all. Getting things in bulk means more to store at home. As opposed to that, buy only the items that you will need today and purchase more as you need them.

TIP! When you have to glue two things together, you should use a clamp that’s good. That ensures the pieces don’t move as the glue is drying.

If woodworking is new to you, a good practice is to read and understand your project plans before you begin. Be sure you understand them through and through. If there is something you don’t understand or something is missing, you could head to your home improvement store to see if someone there could offer suggestions.

Bang a nail into your workshop wall and place a clipboard on it. Use the clipboard to write down a shopping list. This helps make sure you don’t run out of anything.

TIP! Make sure that you include scrap wood in between your piece and clamp. When a clamp is tightened on a wooden surface, its teeth can leave depressions on the wood.

Drinking a few beers on the weekend seems like a good idea when you feel like building a few things. However, it is actually very dangerous. Never drink alcohol while working on a project. Don’t use prescription drugs either.

You shouldn’t do any drugs or drink while woodworking. Even a beer can lead you to make a mistake. This is true of prescription drugs and over-the-counter remedies as well. Do not take any medication that may alter the way you function while working with wood.

TIP! When working with wood, understand the origin of it. It used to be a beautiful tree and is now serving another useful life, so make sure to value it.

Safety is important when it comes to table saws. If you are crosscutting, clamp a block to the fence when you want to set the cut length. Just using the fence can cause the board to spring back; however, clamping the board will prevent this. And, it will keep the board free for cutting.

You do not necessarily have to purchase a lot of expensive tools if you are just getting started. You may be able to rent tools at your local home improvement store Purchase the tools over time if you really like woodworking. If you’re planning to only do one or two projects, it’s probably a better option to rent the tools that you need.

TIP! Do not rush through the plans for any woodworking project. Really get to know them.

Listen up for anyone you know personally that is wanting to sell a home. You may be able to increase the value of your house with your skills. Your potential projects could range from simple mailbox posts to entire kitchen renovations.

If you’re trying to build a large piece that needs clamps to keep things glued, you may need a big clamp. If you lack the supplies, think about getting a pipe clamp. You just need to ask your hardware store staff to cut and thread the pipe.


Don’t apply too much pressure when you’re sanding. If you apply too much pressure, you can easily find that you’re left with a wood surface that is very uneven. Make sure that you use a smooth motion when you are sanding. Just use a light touch as you sand in a circular motion.


Many lack the skill to see a finished thing of beauty made from a chunk of wood. If you are unlike those people, then you will enjoy the information contained here. Enjoy what you do with woodworking, and let the tips you read here guide you.

Business meets nature