Try creating your own reusable sanding blocks. Begin by using scrap plywood to cut six blocks for each type of sandpaper grit. Be certain they measure 2.5 inches across by 4.75 inches long. Put spray adhesive on the blocks and the tile square. Place one block onto the cork and make sure the cork is cut flush with a sharp knife. You can then spray adhesive on some sandpaper and place it on the corks. Now cut the sandpaper flush with the cork, and label each block.

TIP! When creating crosscut guides, use a stair gauge. Clamp your carpenter’s square to your stair gauges while ensuring they coincide with the rise and run of your stair jack.

Learning the art of woodworking is very enjoyable. It’s fun and these tips will help you. There are countless things you can make with wood, and this article is just the start of learning about this rewarding hobby.

Are you aware that the workbench height is key to success of crafting a good piece of work? In order to attain the perfect workbench height, first measure how far it is from the middle of your waist to the floor. This is the perfect workbench height.

Power Tools

Never guide wood through a table saw with your fingers. Instead, use a long, thin strip of wood to push the piece through the saw. It will help you to maintain the use of all ten fingers on your hands.

TIP! Get proper size nails for your jobs. Very large nails typically cause the wood to split, which will prevent it from holding well.

When you are working with wood, safety must be the number one priority. Be sure to follow all safety directions when using power tools. Never take the guards off the power tools that you use. The guards are there to keep you safe. Hospitalization is not the goal of woodworking.

Add spring to the grip. Using a spring clamp can come in very handy, but using them with one hand can be a challenge. It is sometimes hard to get these things open when you’re only using a single hand. You can make this easier. Before you apply the glue, open the clamps you need and place them on scrap wood using both hands. This makes opening them with one hand unnecessary.

TIP! Whenever you work with wood, make sure that the footwear you use is very sturdy. The environment in which you work will have many nails, sharp pieces of wood and heavy tools.

Before you apply a stain, test it on an area that is hidden or a piece of wood scrap. This can prevent surprises if the shade of the stain is different after it has been applied. Because wood tends to be fickle, mistakes can be avoided by testing it out beforehand.

Look around at yard and estate sales for woodworking tools and equipment. You should be able to find great deals on good tools when you buy them used. As a result, you can save money on your woodworking projects.

TIP! Make your own sanding block that you can use time and time again. Sanding blocks make the task much easier, add control and save you money.

Always do a dry fit prior to gluing two pieces of wood together. If you make adjustments after you have glued the pieces, you might damage something. Dry-fitting will let you plan out where each piece will go.

There are a couple tools you need to have when you start doing a project. You should ensure you have a jigsaw, circular saw, small table saw, drill or driver, and a power sander. The orbital sander is best, but just about any kind of power sander is good enough.

Golf Tee

Create your own sanding blocks for your project. Cut the wood exactly how you want and use it. Use that adhesive to affix your sandpaper to that block, then let it dry. You will then have a sanding block to use.

TIP! Plan out a woodworking budget. Once you get a project picked out, remember to figure out what it’s going to cost you.

A golf tee is all you need to fix door hinges which are loose. Take the door from the hinges and tap your golf tee into every screw hole. Trim the golf tee to fit the hole, then put back the door. A golf tee will give the screw a surface in which to adhere to.

IN the planning stage of large projects, you should think about possible changes you will want to make in the future. For instance, if you are planning a shed, will you want electricity later on? If you would, make sure to allow room for the installation of switches and wiring, and also space on the ceiling for the light.

TIP! Buy the best quality tools you can. Low-quality tools are more likely to break, which will be a huge pain in the middle of a project.

Choose the right size of nail for your project. If you use a nail whose diameter is too great, it can split the wood, which causes it not have a proper hold. Alternatively, nails that are tool small fail to hold the joint. You need to identify the proper size for your project.

Don’t buy too much material whenever you are shopping for a project. If you buy way more than you need and don’t use everything then it’s a waste. Buying in bulk means you’ll have to store a bunch of stuff until you use it eventually. Make sure that you only buy what you need to use.

TIP! Chisel in a direction which is opposite your body. The chisel might slip and cause you to cut your hand very deeply.

Is there a screw that is in a difficult to reach area? This is where your toolbox comes in handy. Grab your 12-point socket and a long-handled screwdriver. Fit the socket onto your screwdriver and attach it to your favorite ratchet.

If woodworking is something you’re just starting with, try buying damaged wood, scrapped wood, or wood that’s cheap. As a beginner, you will make mistakes and you don’t want it to cost you a fortune. You won’t want to waste your money to practice.

TIP! Get a reliable Shop Vac so your cleanup is quick and easy at the end of the day. That can vacuum small wood chips, saw dust and other particles.

Always keep your eyes peeled for free wood. You can likely get pallets from businesses as long as you haul them away. Before you dismantle the pallets, look at examples online of upcycled furniture and out-buildings for some ideas on how they can be used.

When working with pieces of wood that need to be clamped together, take out a scrap wood that is a quarter-inch thick and use it in the middle of the project piece and clamp teeth. When a clamp is tightened on a wooden surface, its teeth can leave depressions on the wood. Teeth marks will be nonexistent if you use this scrap wood.

TIP! You should never be under the influence of alcohol or drugs when working on a project. It may seem refreshing to have a cool beer when it is hot, but it can increase the chance of injuries.

Do not become too much of a perfectionist with your tape measures. Story sticks can be helpful, and you are always able to cut later. You can practice your cuts on scrap wood to perfect your technique. Planning your cuts in several ways prevents mental boredom.

If you have a local PBS station, they often broadcast DIY shows which are geared towards the different aspects of woodworking. These shows cover many skills and tools that are used in woodworking. Some people find it easy to learn by watching these episodes, and you can catch them on the Internet if need be.

TIP! Projects are more complicated than applying techniques and getting the right tools. The final look and appearance of your piece needs to be what should always kept in mind throughout the project.

Incorporate your woodworking skills in yard projects. You can make projects like an attractive doghouse or bird feeder. The birds will help keep insects away from your yard. If you are doing woodworking professionally, have your meeting on your deck in order to show them your handiwork.

A large clamp may be necessary if you’re gluing something together. If you don’t happen to have any on hand, then you might want to think about purchasing a pipe clamp. Ask the hardware store staff to cut and thread the pipe and you’ll have what you need.


Always be on the lookout for people that are tying to sell a home. You can earn some cash with your woodworking skills by using them to boost your home’s resale value. You can do a lot from just getting a new post for a mailbox, to doing their kitchen’s drawers.


Consider reusing your sanding block. Sanding blocks make sanding much easier for you. Scrap plywood can be turned into a fine holder. Check how many different grits of sandpaper you have, and cut an appropriate piece of wood to spray with your favorite adhesive to use with your sandpaper.


Check your stain on a discreet spot of the wood. The stain might not look quite right or could be difficult to apply. By seeing how the stain goes on in an unseen spot, you will be able to make the changes necessary. You will save time and trouble later on.


When working with wood, remember that everything does not need to be perfect. Each creation is unique and has personality. Read these tips to become better at woodworking, and remember, practice makes perfect!

Business meets nature