Always apply a pre-stain conditioner to the wood you want to stain. A pre-stain conditioner helps keep away any irregularities or blotches in the wood. They will make the wood smooth and allow the stain to go on evenly.

TIP! You can make your crosscut guides using stair gauges. Clamp these gauges to the carpenter’s square you have and be sure they’re matching up to the stair jack’s run and rise.

The skill of woodworking has many different aspects because of the various ways wood can be used to create beautiful and useful items. If you wish to get into it, this article was written for you. Follow these tips to get off to a great start in woodworking.

Do some dry fitting before applying glue and then piece the wooden pieces together. If you adjust things after applying glue, you might cause some damage. Dry fitting the pieces together gives you an idea of what pieces go where.

TIP! A small metal ruler is handy to carry around in your pocket for quick measuring. It has a tendency to fall out of your pockets, though.

Before using any stains or finishes on your wood, make sure you stir them and not shake them. Certain ingredients in such items tend to settle with time. Shaking can cause bubbles that hinder the mixing. Stir completely, allowing all settlement to blend evenly and smoothly.

Ear protection is important. The machines and tools you use will be noisy. Continued exposure to the noise can cause some hearing loss. Headphones or throw away ear plugs are both good protection options. Regardless of your personal choice of ear protection, make certain you always use them when woodworking.

TIP! Look around for bits of recycled wood. There are a lot of places that have scraps for you to use.

Know your budget so you know what you can make. Sometimes your wallet will restrict what you can actually do. You’re excited to get started only to find out that halfway through you’re not able to afford continuing. Plan ahead and avoid surprises.

Have plenty of light in your work area. You have to be accurate in measuring when you work with wood. You will need a variety of sharp tools and proper lighting is needed to see what you are doing. These things require that your space be adequately lit for safety.

Gel Stains

You should have a few essential tools before you start working with wood. The first tool you need is a hammer. A claw hammer is an excellent woodworking tool. When choosing a hammer, opt for a hammer that feels comfortable in your hand. This will help you to maintain a solid grip while working, but never use a hammer that is extremely heavy.

TIP! Make sure the lighting is good in your shop. Bright light is necessary when working with wood.

If you plan to stain furniture, look in to gel stains. Liquid stains are prone to running, while gel stains tend to stick. Gel stains are also thicker, which means they have more consistent pigment throughout the stain. This gives a more even appearance to the finished product.

Wet your lumber before beginning to sand. This helps raise the wood grain. When you do this, then this helps to do away with those very fine scratches. It also gives your finished product a sleek look. It, quite possibly, could save you work in the long run, too.

TIP! Drafting squares can help you be more accurate when you’re making cuts that are small. It can be tricky to adequately measure wood in the two to three foot range.

If you rent a tool, ask for a tutorial on how to use the tool. Oftentimes, they have someone available to train you with the tool. Find out if they have any helpful handouts or worksheets you can use.

As the saying goes — measure twice, cut once. Triple checking couldn’t hurt either, especially if the materials you are using are particularly expensive. The most expensive mistakes occur in the measurement process. Measuring will help you avoid cutting your lumber incorrectly.

TIP! Watch some woodworking shows that are on television. These shows offer invaluable information and ideas to take your projects to the next level.

No woodworking shop should be without a stair gauge. They are most often used to layout stair jacks, but you can use them to clamp your carpenter’s square. It will convert a carpenter’s square into your guide for the circular saw. You won’t have to worry about uneven cuts any more!

It is possible to create your own custom sanding blocks. All you need to do is customize the size of your wood. Next, use some adhesive to attach your sandpaper to your block, and then let it dry. You’ll end up with a perfectly sized sanding block.

TIP! Think long term at all stages of your project. For instance, would you add electricity to the shed you just built later on? If this is the case, you have to make sure there is a lot of room for switches and wiring to get installed.

If you have interior doors that are starting to come loose, you can easily remedy this problem with golf tee. Remove the hinges and the door. Then, in the hole where the screws were, lightly hammer a common golf tee into the hole. Trim the excess wood and put the door back into place. The tee will allow the screw to bite into the door.

Make sure the blades on your saws are sharp at all times. Dull blades are the cause of most accidents in woodworking shops. That’s because dull blades cause more wood kickbacks. This kickback is something a lot of people run into trouble with when working in their shops. Sharp bits are a great way to avoid this.

TIP! The use of a fly cutter can be quite dangerous. It’s a good idea to use fluorescent paint to highlight the tips of the bit and the arm for easier visibility.

Whenever you work with wood, make sure that the footwear you use is very sturdy. This is necessary since your work area may be full of wood chips, nails and all types of tools. A good quality boot will keep your feet safe from stepping on nails or dropping a heavy piece on your foot. If you prefer shoes, try wearing shoes with steel toes in them. They are safer than regular work shoes.

If you’re always double checking what you’re measuring each time you’re working with your circular saw on an edge that’s straight, try writing down what the measurements are from the blade to the shoe edge right onto your shoe. Do this on each side of the blade.

TIP! If you are a beginning woodworker, don’t spend a lot of money on tools. Rather, ask family or look for Freecycle and other groups to find out if anyone has tools they can give you.

If woodworking is new to you, a good practice is to read and understand your project plans before you begin. Review them to make sure there isn’t any information missing. If they aren’t complete go to a home improvement store to see if they can help you.

When you are gluing wood pieces together, make use of a good clamp. This keeps the pieces together as the glue dries. There are various sizes and shapes of clamps for various kinds of gluing pieces, so choose the one that works for your job. You might need a few clamps to get the job done.

TIP! Make good use of drawers. You can get a great deal of tools into your shop if you efficiently use your drawer space.

You should work in a well lit area. Make sure to focus on your accuracy when you are cutting. Additionally, you’ll be using sharp instruments to cut the wood. The things that are required in woodworking require adequate lighting so that you can see what you are doing and avoid injuries.

Try to hang power cords in your shop well over your head. It’s better to have a place to get tools plugged in that’s hanging or mounted on a pole. Power cords that are all over the floor create a tripping hazard. In addition, power cords force you to constantly bend for plugging and unplugging, which is not good on the back.

TIP! Get a reliable Shop Vac so your cleanup is quick and easy at the end of the day. This device will pick up all of the debris from your job.

Choose the type of wood that is right for the project you are planning. Soft woods can scratch easily and shouldn’t be used for a table. Remember that different woods turn different colors when finished.

When working with wood, understand the origin of it. It used to be part of a beautiful tree, and it is important to remember that history. Competent cutting is required so the material you are using does not go to waste.

Drafting Square


For smaller cuts, a good tool is the drafting square. If you must make a cut in the 2-3 foot range, measuring accurately can be tricky. Carpenter squares need to be fastened to one edge, and drywall squares are often inaccurate. A drafting square is the solution in this situation. They fit into small spaces and keep things accurate.


Woodworking can be a great hobby for you. You may even be able to earn money because of it. The above tips can help you get into woodworking and learn more about this great and fun skill.

Business meets nature