Have a good grasp of your budget before you start on any project. A lot of the times your eyes will be larger than your wallet when thinking of a woodworking project. It’s easy to get so excited to make something and then not have the money to complete the project. Plan things out in advance, and you won’t have unpleasant surprises.

TIP! Choose the right type of wood for the project that you are doing. Different types of wood can handle different levels of stresses.

If you want to try woodworking, this article is perfect for you. There are many tips offered below which can help you begin a great job or hobby. Keep reading if you want to learn more about this wonderful art form.

Keeping a small ruler with you in a pocket is a great idea, however it may fall out easily because of its length. Instead of wood, choose a metal rule and keep it with your magnet. Keep the ruler and the magnet in the same pocket. The ruler will stay in place.

TIP! If you have interior doors that are starting to come loose, you can easily remedy this problem with golf tee. Take the door off and remove the hinges, then lightly tap the golf tee into the screw holes.

A stair gauge is an essential item in every wood shop. They are typically used to put down stair jacks, although they can function as a clamp for a carpenter’s square. That way, it is possible to make a carpenters square into a circular saw guide. You can have straight cuts every single time when you use that square.

Ensure that you are wearing the right protection for your ears. Machinery for woodworking is very loud. Extended exposure to such noise can cause hearing loss. Good headphones or even disposable ear plugs are good ideas. Whatever your choice, make sure you are wearing the protection when you are using the machinery.

TIP! Wear good footwear as you work on your projects. When you are working with wood there are all sorts of hazardous objects that can land on the floor.

Know what a wood’s characteristics are prior to staining it when you’re working on a project. Low quality wood is considered “paint grade” and isn’t meant to be stained. Particleboard and products labeled as “veneer” do not absorb stain evenly. The proper wood helps your project come out the way that you hoped.

Find recycled wood. Many places have scrap wood that you can use. Floor shops, home improvement stores and other similar places will discard unused wood. Use this to your advantage and keep an eye out for pieces you can use. You will save money doing this too.

TIP! Look around online, at garage sales, estate sales and yard sales for deal on your tools and other woodworking equipment. By buying used, you can save yourself a lot of money.

Keeping a ruler in a pocket can be a good idea, however sometimes it can be frustrating if it falls out. Get a metal one and keep it in the pocket that has the little telescoping magnet for picking up loose screws. The magnet will keep everything in your pocket.

Safety first. If you are crosscutting, you will need to set the cut length by using a block you have clamped to the fence. This will ensure that the board won’t spring back. If you clamp, keep the board end open so you can cut.

Golf Tee

Do not apply too much pressure when sanding wood. When you put pressure on your wood while sanding, you can create an uneven surface. If you are using the right grit, you do not have to be forceful. Use a circular motion to lightly sand.

TIP! If you need excellent circular saw guides, then stair gauges is the answer. Typically, stair gauges are used to calibrate stair jack rises and runs.

If the hinges to your interior door are loose, use a golf tee to fix the problem. Just take the door off the hinges and tap the golf tee into the offending screw hole. Cut the part of the tees that do not fit into the screw holes before putting the door back in its frame. A golf tee will give the screw a surface in which to adhere to.

Always wet a surface before beginning to sand. Getting a surface wet will raise up the grain. This can help you avoid fine scratches. It leaves your finish looking more professional. It can also save you some money in the future.

TIP! Some power tools are essential for woodworking projects. If you’re not already the owner of a jigsaw, a circular saw, a small table saw, a sander of some kind, or a drill, then you need to get these things.

Protect your ears. The machines and tools you use will be noisy. This can impact the quality of your hearing over time. Use headphones or ear plugs you can throw away. Whatever choice you make, be sure that they are always worn inside the shop.

Always have a budget in mind when it comes to any woodworking projects. Figure out what the materials are going to cost you. Make a list of exactly what is needed and how much it will cost. You don’t want to have to bow out of a project down the line because it is too expensive to continue.

TIP! Know what steps are required to finish your project before starting. You don’t want to overlook some directions and make mistakes because of it.

Look around your neighborhood and workplace for sources of free wood. Some businesses give away their pallets for free provided that you remove them yourself. You can also get a lot of good ideas online.

When you’re learning all the things you can do with woodworking, watching someone else can help you a lot. Check out online videos if you are unsure about a particular tool or project. You may be able to watch videos that will cover your whole project.

TIP! Fly cutters are quite dangerous. Make sure that you paint the tips so that you can see them easier.

Stay in contact with others. Woodworking shops tend not to have Internet access. There will be times when a project flummoxes you. Use other woodworkers as a support team to help answer your questions or even to help generate ideas. You can’t have a problem that someone else has not had.

If you are just starting woodworking, you need not buy all the tools right away. Explore online groups like Freecycle and ask people you know if they have extra ones. You may find that you are able to adequately stock your shop at no cost to yourself.

TIP! Do the same project multiple times. The way to get better at something is to do it over and over again.

Be safe when using your table saw. If you are crosscutting, use a clamped block to mark the cut length. This is preferable over utilizing the fence alone, as it prevents the board from springing back. Using this method keeps the end of the board free for cutting.

For a lot of people that do woodworking, they base their whole shop around their table saw. This a fine way to setup your shop. Get a high-quality table saw. Save money on some tools, but your table saw should be high-quality.

TIP! Establish a properly ventilated shop space for your woodwork. Additionally, the area should be well lit and should contain a fire extinguisher.

Your eyes are too important to take a chance with. So don’t think that you shouldn’t wear goggles or else you may end up injuring your eyes for good. Get a different pair of goggles if you cannot see well with the pair that you have.

When working with wood, understand the origin of it. Keep in mind that wood comes from trees, which are a part of nature. Therefore, you shouldn’t abuse it. Competent cutting is required so the material you are using does not go to waste.

TIP! When making the things that you have thought up, it will take more than techniques and tools. It’s all about that end look, and you need to keep your thoughts on that.

Build your own sanding block. Sanding blocks make the task much easier, add control and save you money. It is easy to use scrap wood to make one. Cut out scraps of wood for the sandpaper, then spray it with the adhesive and apply the sandpaper.

Painter’s tape is an often forgotten, but is an important tool needed for a workshop. When using this tape to mark a cutting line, you’ll get a more precise cut and splintering will be lowered. You can use it to make sure glue doesn’t go somewhere you don’t want it to go.

Stair Gauge


You can use a stair gauge to guide circular saws. A stair gauge can help match the notches up. Use them along with a carpenter square to guide your saw.


As you can now see, woodworking entails many details. Thankfully the information you read here has offered many great tips to help you. Now, keep exploring and start to put into practice what you’ve learned.

Business meets nature