You can make reusable sanding blocks. Cut six blocks from any 3/4″ plywood you have, for each sandpaper grit you regularly use. They need to be 2.5″ X4.75″. Spray adhesive on your blocks and also the cork square tile. Use a utility knife to cut the cork flush after sticking a block to the cork. Spray adhesive on a sheet of sandpaper, and stick it to each block of cork, facing down. Lastly, cut the sandpaper flush with the cork, and label each block.

TIP! Stir finishes or stains before using them. It is possible that some of the ingredients will settle as time goes on.

If you’ve ever looked at beautiful woodworking and wondered if you could do the same, you’ve come to the right place. There is not a lot of information about woodworking, and that is the reason this article is here. If you need to learn more or get better at your woodworking, then follow the suggestions listed below.

Dry fit your project together before beginning to glue. If you attempt to readjust the pieces once glued together, you risk damage to your project. Dry-fit will help you realize what goes where.

TIP! Be sure your blade sharp prior to trying to cut. If you allow a saw blade to become dull, you will have a tough time sawing with it.

Stir your paint and stain, don’t shake it! There are ingredients in these types of products that can settle over a period of time. Shaking can cause bubbling which prevents the products from mixing properly. Be sure to stir thoroughly, until all settlement is dispersed evenly and smoothly.

If you need to purchase tools or other equipment, search online auction sites or check out a yard sale in your area. You can often get great tools at a fraction of the price if you don’t buy them new. If you are just getting started or replacing older parts, this can save you tons of money.

TIP! Safety is optimal when you are woodworking. Use a block clamped to the fence whenever you are crosscutting a piece of wood to properly set te cut’s length.

Select the correct wood to complete your project properly. Some woods are better for certain projects than others are. If you aren’t sure how a wood type will respond to your project plans, then you should research the wood before you begin.

There are some important hand tools that you should buy prior to beginning your first woodworking work. A necessary tool for any woodworker is a hammer. The best type of hammer for woodworking is a claw hammer. Select one that feels comfortable in your hand. You shouldn’t get a hammer that will be too heavy.

TIP! When you are sanding, do not apply a lot of pressure. Using pressure while sanding may cause your surface to become uneven.

If you are renting a tool that’s new to you, ask the company you are renting from for a quick tutorial. The people that work for these companies have representatives well-versed in the tools they rent. They can get you up to speed. Also ask for any documentation to help you out.

The area you are sanding should be wet. That forces the grain to rise. This lets you eliminate scratches. It leaves your finish looking more professional. You could also save yourself some time and energy later on.

TIP! Plan out a woodworking budget. Once you have decided on what project you want to do, then sit down and crunch the numbers on the material cost.

Avoid using your fingers as guides while cutting narrow pieces of wood. Using a piece of wood as a guide is much safer. This will prevent you from loosing a finger or two, which would make working with wood very difficult.

Know the directions for your woodworking project prior to beginning. You don’t want to just go over the directions one time to figure out that you’re making mistakes. Read the instructions several times thoroughly, making sure you completely understand them.

TIP! When working with machinery like saws and power tools, you must avoid wearing clothes that are loose fitting. Many accidents have happened due to it.

Are you having trouble reaching that out of the way and highly obscured screw? Dive into your toolbox. Grab your 12-point socket and a long-handled screwdriver. Get the socket fitted to your screwdriver and then attach that to the ratchet you like to use the most.

Always practice before getting started with a new project. Use scrap pieces of wood to try out new techniques and tools. Using scrap wood allows you to practice until you learn a new technique.

TIP! One of the best ways to learn how to work with wood is to watch it being done. Search the web for different tutorial videos that you can use.

In order to find great deals on woodworking tools and equipment, there are many places you can search, including yard sales, estate sales, garage sales, and even online. Buying used can help you save a lot of money. This can save you money when building your workshop.

Make sure you are cutting away from, and not toward, your body when you chisel. The chisel might slip and cause you to cut your hand very deeply. The same thing can happen when you work with a saw. You should always use a motion that directs the saw away from your body.

TIP! For beginners, it is usually best to buy inexpensive woods at first. You may even try scrap wood.

Something can always fly toward your eyes and cause damage. Wearing goggles can save your vision. Get a different pair of goggles if you cannot see well with the pair that you have.

Dust your work area regularly. While hardwood dust has the reputation for being more troublesome than softwood, that isn’t always the case. There are many particles that can create an allergic reaction while working with wood. Always keep your skin, nose, mouth and eyes protected at all times.

Sanding Block

Use drawers to your advantage. You can fit a lot of tools in one small room if you use drawer space efficiently. Also, put similar tools in the same space. This technique will help you quickly find the appropriate tool. Remember this tip when arranging your workshop for best results.

TIP! Hang cords above your head in your shop. It is preferable to plug tools into hanging or pole-mounted sockets.

Create a sanding block out of materials laying around your shop. A sanding block is useful for using sandpaper, as it gives you greater control while being less stressful on your hands, however it is not necessary to purchase an expensive holder. Make sure you are using plywood scraps to create your own. Cut the piece to a right fit for your hand and use adhesive to help the sandpaper stick better.

Do not drink or do any drugs when you are working on a project. A nice cold beer may sound really good when it’s hot outside, but it could also lead to one tragic mistake. This applies to medications as well, even store-bought ones. Avoid taking medicine that affects your abilities to function properly when you are doing woodworking.

TIP! Start a pilot hole ahead of nailing wood. A drill bit that is slightly thinner than the nail is used to drill a small starter hole.

A great circular guide is a stair gauge. They’re normally used to mark stair jacks. However, using both on the carpenter square tongue, you will have a useful guide when using the circular saw.

It is not necessary to buy a lot of expensive tools to do woodworking projects. A lot of home improvement places will rent them out. If you intend to continue your hobby, you can just pick up the tools over several years. If you only want to dabble in it once in a while, then it’s better to rent tools.

Drafting Square

Painter’s tape is an often overlooked tool for a woodworking shop. The best thing about this tape when you’re cutting it is the ability to see a straight line and lessen the chances of splintering. You will also use the tape to allow glue to stay inside where you’re trying to glue.


For more accurate smaller cuts, get a drafting square. It isn’t easy to cut in the 2-3 foot range. Some people try to use drywall or carpenter squares for this, but both can prove to be inaccurate or difficult to manage. Instead, check your art supplies or make a trip to an art store and pick up a drafting square. They’re accurate and simple to use.


Do not use too many extension cords. Unplug whatever tool you aren’t using, and plug in one that you will be using. This woodworking tip will keep you safe so you don’t trip over cords or risk getting yourself electrocuted.


Now that you know more about woodworking, you should be confident enough to get started. By keeping at it, and learning something additional on a daily basis, soon enough your skills will allow you to create more complex projects. Apply the ideas from this article to get going.

Business meets nature