Before you stain your wood project, apply a pre-stain conditioner onto the wood. By using these products, you are likely to avoid blotching or imperfections in the final product. Also, it will create a smooth texture upon completion.

TIP! You can make reusable sanding blocks. Cut six blocks from any 3/4″ plywood you have, for each sandpaper grit you regularly use.

There are wood products available all over the world. Woodworking involves taking a piece of wood and turning it into lovely, useful items. It woodworking is something that appeals to you, review the advice in this piece to get started.

If you’re using stain, test it first on a scrap of wood. Then, you can stay away from any surprises if the stain looks differently after application. Different woods can affect stains differently. Sometimes wildly different. Testing first is the best way to know what something will look like.

TIP! You want to be sure that you have the right size nails for your project. Nails that are too wide tend to split the wood, weakening the hold.

Always apply a pre-stain conditioner to the wood you want to stain. By using these products, you are likely to avoid blotching or imperfections in the final product. It will also help to improve the appearance of the wood itself, as wood has a natural grain and the conditioner fills it in to some degree.

if you’re using loud equipment for woodworking, always make sure to protect your ears. Machines can be noisy and damage your hearing. Continued exposure to the noise can cause some hearing loss. It is easy to buy disposable plugs for the ears, or you may decide to buy pricier headphones. No matter what you choose, be sure that you use them whenever you operate machinery.

TIP! Check around your town for free wood scraps. Many businesses often have pallets they no longer want, and may let you have them if you have a vehicle to haul them off with.

Before you commit stain to wood, it is usually a good idea to test out the stain in an unseen area of the wood first. This will help you avoid any surprises if the stain color looks different after it has been applied. You never know how wood will behave, so do the test first.

Seek out wood that has been recycled. Scraps can be discarded which are a boon for your projects. Flooring stores and home improvement shops are always tossing away unused wood. This is where you should jump at the chance to get some extra wood for your own projects. This can produce real savings.

TIP! If you are planning on a woodworking project, it is important that you select the best wood for the project. Never use soft woods for table tops as they will scratch.

Before you begin, have a budget in place so you will know the limits of your project. It is easy for your eyes to be larger than your wallet. It is very disappointing to run out of funds before your project is complete. Crunch the numbers before you start, so that you avoid unwanted shocks.

Your eyes are too important to take a chance with. Therefore, don’t ignore wearing your goggles. Purchase a pair of goggles that fit on your head comfortably.

TIP! There are a couple of hand tools you need to buy before you get started with a woodworking project. A hammer is a good first tool.

When you develop a budget, remember to take into account all new items that must be purchased. It is easy to forget about tools when you are thinking of how much wood you require. There may be things that you need and will have to get which may become budget breakers unless you plan for it.

A stair gauge can be a great guide for a circular saw. Usually they are used for matching up the notches and the run and rise of stair jacks. However, stair gauges can also be used as circular saw guides.

Gel Stains

Plan your woodworking projects with a budget in mind. Take the time to determine the cost of the materials. Come up with a list of everything you will need and the cost of each item. It’s never good to misjudge costs to the point where you need to drop a project.

TIP! If you are going to work on a large project, think about looking at others’ plans. You might not mirror them step by step, but they can serve as inspiration for your own twists.

One of the more recent developments in stains are gel stains. Liquid-based stain often runs on application, and gel stains stay put much better. Gel stains also allow for consistent color on pieces since it is thicker.

Know all of the steps that the project requires before beginning it. Avoid reading the directions just once because you would hate to realize you made a mistake halfway through your project. Read the instructions several times thoroughly, making sure you completely understand them.

TIP! Always save your pieces of scrap wood because you may need them for another project. You don’t know just when you’re going to need a tiny wood piece to fill a gap.

If you are renting a tool that’s new to you, ask the company you are renting from for a quick tutorial. Specialists will often be able to teach you about the tool. Also, ask if they include a handout explaining tips on using the tool.

Woodworking shops tend to include multiple saws. For example, both a table saw and a circular saw perform different functions. To cut curved pieces you need a jigsaw. Lastly, the saber saw that is used to trim areas that the circular saw will not fit.

TIP! If you are only beginning to do woodworking, use cheap wood or even scrap wood. Mistakes will be made, but practice makes perfect.

Choose correctly-sized nails. Very large nails typically cause the wood to split, which will prevent it from holding well. But if you use a nail too small, it may not have the strength or size to hold the pieces together. You must be able to determine the right size for the job.

Always use a strong clamp when gluing wood together. This will keep them in place as the glue dries. There are many different sizes for clamps so that you can get the perfect one for your project. It may be necessary to use multiple clamps on a single project.

TIP! Keep the dust in your workshop cleaned up as much as possible. Softwood dust can be just as much of a hazard as hardwood dust.

Do you want to tighten a screw but don’t have space to fit the screwdriver and your hand? You should look to your toolbox for assistance. Get yourself a long screwdriver along with a 12-point socket. Place the socket on your screwdriver, then use it on the ratchet.

For a lot of people who work with wood, the main attraction in their shop is the table saw, with everything else set up around it. In fact, this is really the ideal set-up for many reasons. Buy a good quality table saw. You may be able to save a little money with some tools, but buying a cheap table saw is something you may regret. A table saw is the heart of a wood shop.

TIP! Make ample use of drawers. By making good use of your drawers, you can store many tools in a small space.

Wear good footwear as you work on your projects. There could be nails on the floor, pieces of wood and other debris that could hurt you. You want to ensure that you have the proper protection, as you may tread on a nail or another sharp object. The shoes must be tough enough to endure your work environment.

Make sure you follow all the directions of the project you’re doing. It might seem that a short cut is possible, or you can skip a step, but ultimately you will realize that the instructions are there for a reason. The directions ensures the project looks its best.

TIP! When working with wood, understand the origin of it. It was a tree sacrificed for your benefit.

Your work area should be well lighted. You need to be accurate when you measure. Light is also a safety issue since you’ll be working with sharp tools. All of these need proper lighting so that you can see well enough to avoid mistakes and potential injury.

You need some large clamps so glue will set. You might think about purchasing a pipe clamp. Go to the nearest store that sells hardware, and ask them to cut and thread some pipe for you.


Safety comes first when using a table saw. When crosscutting, make sure you use a block clamped onto a fence to set the cut length. This is better than just using the fence itself, as it keeps the board from springing back. This technique will also ensure that the board is free to cut.


Woodworking is no easy skill. It requires knowledge, creativity and dedication. Let the great information in this article spark your creativity. Take this information to boost your skills, and learn all that you can about

woodworking. This helps you bolster your success.

Business meets nature