Test out stains on a hidden spot. This will give you an idea of what it will look like on the finished project. Wood may not react as you thought, so avoid mistakes and possible disappointment by performing this simple test.

TIP! If you’re working on a woodworking project that calls for stain, always stir the stain first. The ingredients in these can settle over time.

Woodworking is something that you learn. Although it seems incredibly difficult to a novice, with proper training you can become an amazingly skilled woodworker. One of the most important things you can do to get better at it is to educate yourself. Absorb all the information you can and then put this to good use. Continue reading to learn all you need to know about woodworking.

When putting together your budget for a project, do not forget to include the cost of new tools. This is easy to overlook if you are focused on the amount of wood you need to buy. New tools can break your budget, especially if you need heavy duty equipment.

Spray Adhesive

Choose the right wood for your project. Soft woods can scratch easily and shouldn’t be used for a table. Remember that different varieties of wood have different colors when they are finished.

TIP! Don’t forget to stay in touch with other people. It’s easy to get lost in your space and lose track of others.

Make your own sanding blocks. Use a scrap of 3/4″ plywood to cut six blocks, one for each sandpaper grit you need. Try to be certain that they measure roughly 2.5 inches by 4.75 inches. Spray adhesive on your blocks and also the cork square tile. Put one block on the tile square and cut the cork with a utility knife. Spray adhesive on your sandpaper, and then stick it to every cork block, facing down. Lastly, put the sandpaper flush to the cork, labeling all blocks.

If a saw guide for a circular saw is needed, a stair gauge will work perfectly. Normally, these stair gauges match both the rise and run of stair jacks so it’s easy to match the notches up. But, using them together with a carpenter square works to guide a circular saw.

TIP! Use a drafting square to complete your projects. It can be tricky to adequately measure wood in the two to three foot range.

Stir your finishes or stains rather than shaking them. The ingredients in them can settle. Shaking the can may cause the contents to bubble and prevent proper mixing. Make sure that the product is thoroughly stirred, and everything is evenly dispersed.

Measure twice and cut once is an old adage that should be followed. Triple checking might even be a good idea if you’re using materials that are expensive. Make sure that you measure properly before you start. If you make an angular cut or cut a piece too short, you can mess up a project entirely.

TIP! Use only one extension cord at a time. Correct use means unplugging a tool when you finished with it and plugging in the next one you will be using.

When thinking about your project’s budget, remember to include the cost of any new tools you will need to purchase or rent. Some people miss this step and their budget is quickly blown. Some of the necessary items may be very costly, so plan your budget carefully.

Be patient. Many people get frustrated if their project goes slower than expected. Remember that your result is waiting there inside of the wood, you just have to bring it out. Patience will help you be successful at woodworking. Soon, the project will be complete.

TIP! Create a plan on paper of where you want your wood to go. If you start out with a budget and blueprint for the entire project, this helps to keep you in check as you’re working on it.

Consider doing a dry fitting of your pieces before you use glue to join these together. You could cause damage if you tinker with the fit after you’ve applied the glue. Dry-fits help you see what components go in what locations.

Before you begin any woodworking project, there are a number of power tools that are essential you have on hand. If you’re not already the owner of a jigsaw, a circular saw, a small table saw, a sander of some kind, or a drill, then you need to get these things. It would be nice if the power sander were an orbital one, but any sander will do.

TIP! You are able to create your own sand blocks that are custom-sized. Start by cutting the wood in the shape and size that you would like.

Stair gauges are a crucial part of any woodworking shop. They are typically used for laying out stair jacks, but they can also be used as a clamp for a carpenter’s square. This will turn your square in to a circular saw guide. When you use this square, you’ll cut perfectly straight every time.

Create a comprehensive budget for your project. Once you pick out a project, don’t forget to sit down and figure out the cost of your materials. Know what you will need and the cost. It’s not fun if you have to abandon your project in the middle because the costs made it so you couldn’t afford to continue.

TIP! Research similar projects to the one you have planned, online. You don’t have to do exactly as they have done, but their steps may spur an even greater project on your end.

Learn more about different kinds of wood and their characteristics. Each wood has its own characteristics. Different types of wood will react differently to various stains. Different cuts will also splinter differently. In addition, the grain will look different as well. These will be factors when working with wood.

Make sure you are cutting away from, and not toward, your body when you chisel. Chisels can slip and end up stabbing you if you are chiseling toward you. The same goes for when you use a saw – start in a motion away from your hands and body to keep yourself safe.

TIP! Try renting tools before buying them. It allows you to test it out to see if you really want it in your shop.

Have some more spring when you’re working with your grip. There may be times that your project requires a spring clamp when you only have one hand available to open it. It’s hard to open it with a single hand. You can make it easier on yourself. Prior to starting a glue-up, be sure to arrange all necessary clamps on a piece of scrap wood first. In this way, you will be able to retrieve them with one hand as you need them.

If you are a woodworking amateur, you do not need to buy every single tool right away. Look for inexpensive tools on auction sites or ask people you know if they have extra tools and materials they no longer want You never know how much money you can save by finding lots of helpful stuff that is free.

TIP! Think about doing projects you’ve done in the past again. Practice makes for improvement, so doing a project you’ve already done can help you hone your skills.

Always ensure that the area you are working in is well lit. Woodworking is a hobby that requires great accuracy when measuring. Light is also a safety issue since you’ll be working with sharp tools. Proper lighting is a must for all these things so that there are no injuries or major mistakes.

Put a nail in your shop’s wall and hang up a clipboard. This gives you a handy place to write down stuff you need to buy or do. This is easy to use for shopping trips and you won’t be out of important items.

TIP! Make sure that you maximize usage of drawers. By making good use of your drawers, you can store many tools in a small space.

Your eyes are too important to take a chance with. Therefore, don’t ignore wearing your goggles. Invest in a pair of eye goggles that fit well and provide clear vision.

Place power cords very high over your head in your workshop. It is much better to plug tools in from pole-mounted or hanging sockets. Whenever you use power cords that lie on the floor, everyone in the area is prone to tripping. Additionally, it is hard on the back to have to keep bending over to move plugs.

TIP! When woodworking, never rush through the steps of a project. Take a little bit of time and study what you’re about to do.

For small cuts, use a drafting square. If you need wood that’s 2′-3,’ it may be difficult to measure it accurately. For instance, drywall squares have a tendency to be inaccurate. Also carpenter squares have to be fastened on an edge, so they are extremely hard to work with. Check out drafting squares at your local art supplier. They are simple to use and very accurate.

Painter’s tape is an underrated tool that you should have. When cutting along a line made with this tape, you can stay straight and reduce splintering too. It can also be used to prevent glue from sticking to the wood’s exterior.


In conclusion, anyone can learn about woodworking. It is no secret that you need to educate yourself on the basics of woodworking and put them into practice. By employing the above suggestions from the article, you will be a master woodworker before you know it.

Business meets nature