Try making sanding blocks that are reusable on your own. To do this, cut six blocks of wood from scrap plywood that is 3/4″ in diameter for each sandpaper grit. Your blocks should be 2.5 x 4.75. Spray adhesive on your blocks and also the cork square tile. Stick one block to your cork and be sure to cut your cork flush using a utility knife. Use spray glue on sandpaper and stick it to the block. Cut the sandpaper flush and label each block.

TIP! Have a good grasp of your budget before you start on any project. Sometimes your eyes are larger than your wallet when you have a particular project in mind.

Woodworking is a highly-desired skill that is always in demand. Woodworking offers something to everyone, beginner and master woodworkers alike. The tips below can help improve your skills and help you take your talent to new heights.

One of the more recent developments in stains are gel stains. Gel stains will adhere much better to your wood. Also, gel stains are thick, so they tend to stain more evenly.

TIP! Whenever you’re thinking of cutting a piece of wood that’s narrow, don’t try to use your fingers to guide it. Using a piece of wood as a guide is much safer.

Safety must be a priority when doing woodworking. Always purchase the necessary safety equipment to avoid injury. Don’t take guards off of the power tools. You could get hurt if you do this.

Do some dry fitting before applying glue and then piece the wooden pieces together. It won’t be easy to adjust things as necessary if you’ve already applied the glue. Dry fitting the pieces together gives you an idea of what pieces go where.

TIP! Do you currently have a screw that needs some tightening but is not easy to reach? Your toolbox may hold the answer! You can use a 12-point socket and a long-handled screwdriver. Fit the socket onto your screwdriver and attach it to your favorite ratchet.

Dry fittings prior to glue application are always a good idea. If you make adjustments after you have glued the pieces, you might damage something. A dry-fit is optimal to do before incorporating glue on your wood.

Look around for free wood in your area. Businesses who use pallets may give them to you at no charge, especially if you can collect them. Look online for some examples of up-cycled pieces to give you some ideas before you start.

TIP! Footwear is an important component of your safety equipment. Your work environment will be full of nails, wood pieces and various types of tools.

Know your wood’s properties before you use it. You’ll want to look for paint-grade or stain-grade woods, depending on your desires for the project. Differentiate between veneer and particle board as veneer tends to resist stain, while particleboard can take on too much stain. Choosing the right wood makes sure your project becomes all that you planned.

If you are new to woodworking, consider beginning with a woodworking kit. The wood is already cut to size in the kits. This helps you learn all of the basics up front. This will also save money down the line because you will be learning how to avoid costly mistakes.

TIP! When you’re sanding a project, be sure you’re not applying too much pressure. Using pressure while sanding can make the surface uneven.

You should have a small ruler on you. If it falls out, try buying a metal one and use a magnet for picking up screws to keep it from falling out. The magnet keeps both objects firmly in your pocket.

Prior to sanding, get the surface wet. Wetting a surface will bring up the grain. This helps get rid of unwanted fine scratches. This makes your final product look better. It may also save work for you down the road.

TIP! Make sure to stay patient. Many people begin working on a woodworking endeavor only to see it not coming out as they had planned.

Know about the different kinds of wood you use, and the characteristics of each. Each type of wood is completely different. Different types of wood take stain differently. They will splinter in different ways, based on how you cut. And, you will notice a plethora of grains. These will be factors when working with wood.

Think about renting tools instead of buying. You can find out if it is necessary to have this particular tool. You can also benefit from a demonstration on how to operate the tool properly and safely.

Golf Tee

Woodworking skills will get better with time. The more you create, the more experience you get. To get to the level where you can complete complex projects, practice on smaller projects.

TIP! When you have to glue two things together, you should use a clamp that’s good. This secures your pieces in a set location so that they do not move as the glue dries.

A golf tee is all you need to fix door hinges which are loose. Remove hinges and door from door frame and lightly tap one golf tee inside each of the screw holes. Cut the part of the tees that do not fit into the screw holes before putting the door back in its frame. The screw will be able to bite into the golf tee.

Think about doing projects you’ve done in the past again. Practice allows you to improve. No matter what type of project it is, think about future possibilities of how it can be profitable down the road. This can motivate you while improving your craft.

TIP! Clean out the dust regularly in your wood shop. Hardwood dust is usually associated with health concerns, but softwood dust can also be an issue.

You want to be sure that you have the right size nails for your project. Nails that are too wide tend to split the wood, weakening the hold. Also, if you have a nail that isn’t big enough it’s nothing going to hold the wood right or penetrate it. You have to figure out what the right size is for the job you are doing.

Use drawers to your best advantage. You can get a great deal of tools into your shop if you efficiently use your drawer space. Keep like tools together. The additional space you make will prove useless if you have trouble locating what you want. Store all tools in a logical manner.

TIP! When you use a clamp on your wood, use a quarter inch scrap piece between the wood and the teeth of the clamp. The clamp’s teeth may leave dents when you’re tightening a clamp.

Put some more spring in your grip. You might need to use spring clamps, but you may only have one free hand. It’s hard to open it with a single hand. You can make it easier. Prior to doing a glue-up, put your clamps on scrap wood with both hands. This makes them near the maximum capacity so they’re easier to use with one hand.

When setting up your wood shop, it’s important that it’s ventilated well, lit well and organized. It should also be well lit and include a first aid kit. Have a fire extinguisher in there too.

TIP! Whenever you want to screw into wood, drill a pilot hole first. If you try to get the screw to bite in without a hole in place, you’ll find it just spins out of control, destroying the wood.

Make sure to wear sturdy shoes when doing woodworking. There are sure to be lots of nails, tools and wood chunks everywhere you step. You want to ensure that you have the proper protection, as you may tread on a nail or another sharp object. You need to have shoes that are study enough to protect you when working in your woodworking shop.

There is no reason to invest your life savings into tools. Often you can rent the most popular ones from a home improvement store. Purchase the tools over time if you really like woodworking. If you are just doing one or two projects, you can rent them instead.

TIP! Your final piece is a combination of more than just tools and techniques. Keep in mind what you desire of the finished product.

Find recycled wood. Discarded scraps are a great find so keep your eyes open. Home improvement stores, floor shops and other places frequently discard unused wood. Use this to your advantage and keep an eye out for pieces you can use. You will find in time that you are saving a good deal of money on each project.

Painter’s tape is an underrated tool that you should have. Use it to cut straight lines so that the wood doesn’t splinter. Also, applying tape to the wood before applying glue will help keep the glue off the wood.


Woodworking has been around for centuries, and it is not hard to understand why. The world has always needed people that are great woodworkers. No matter what your aptitude is in woodworking, the information gained from this article will enhance your love of this craft.

Business meets nature