As with anything involving power tools, safety is the number one concern in woodworking. Be sure that you use the tools as they’re supposed to be used while you’re wearing safety equipment. Do not take guards off of power machines, because they are meant to protect you. You could get hurt if you do this.

TIP! Consider making your own sanding blocks that are reusable. You will need three-quarter-inch plywood cut into six blocks.

If you want to learn more and enhance your woodworking skills, this is the right article for you! The following article has advice to help people of all levels. If you are ready to take yourself to new heights you should read the awesome, informative article that follows below.

Test the stain before you apply it to the wood you are using in your project. This will prevent you from getting an unwanted stain color on your final product. Because wood tends to be fickle, mistakes can be avoided by testing it out beforehand.

TIP! You should do a dry fitting before you apply glue and try to piece woodworking pieces together. If you adjust things after applying glue, you might cause some damage.

Pre-stain wood conditioners should be used prior to staining any wood project. This will reduce the risk of irregularities and blotches in the final product. They smooth the wood, allowing the stain to set correctly.

Protect your ears. The machinery used in woodworking is noisy. Repeated exposure to this noise can cause hearing loss. Buying some inexpensive ear plugs or some noise-cancelling headphones will help. No matter the choice you make, make sure to wear them when machines are operating.

Gel Stains

Carefully going over your plan is crucial with woodworking. Be sure you know what they say and that you really have an understanding of them so you know if they’re missing anything. If you are having difficulty understanding them, visit your nearby home improvement store for some help.

TIP! You should have good lighting in your work area. Accurate measurements are essential when woodworking.

Gel stains are great for staining furniture pieces. Gels stains seem to hold onto the lumber better where liquid stains have the tendency to run when applied. Additionally, because gel stains are thicker the pigment remains consistent throughout the application allowing for more even staining on horizontal and vertical pieces.

Do you know someone who is selling a house? You can earn some extra money by using your skills to increase their house’s resale value. You can redo the drawers and cabinets in the kitchen, or do something simple like install a new post for the mailbox.

TIP! Always pay attention to what you’re working on, since you never know what can fly into your eyes. Always keep your goggles on and be vigilant when working with wood.

You should have at least a working knowledge about the most common woods and their characteristics. Each kind has different qualities. Different types of wood will stain differently. Different cuts of wood will also splinter differently. You will see a lot of different grain types. These will be factors when working with wood.

It’s always a smart idea to draw out your wood plans on paper before undertaking any wood project If you start out with a budget and blueprint for the entire project, this helps to keep you in check as you’re working on it. You will be much more organized and less stressed if you know what you need prior to beginning. Things usually go more smoothly when you plan in advance.

TIP! Try making your own sanding blocks. Simply cut the wood to the size and shape you need for the job.

A golf tee is all you need to fix door hinges which are loose. Take off the door, then remove the hinges. Then gently hammer the golf tee into the screw holes. Cut the extra golf tee off and install the door again. The screw can then “bite” into the golf tee.

Create a comprehensive budget for your project. One you decide what you’re going to make, sit down and calculate the costs. Figure out what you need, as well as what it is going to cost. It’s never good to misjudge costs to the point where you need to drop a project.

TIP! Know all of the steps that the project requires before beginning it. You don’t want to overlook some directions and make mistakes because of it.

It’s very important to always make sure that the saw blade you use is in great condition every time you use it. A blade that has become dull can make it almost impossible to saw as you need to. You’ll ruin the wood and end up spending more money.

Look for nails and screws before you cut wood. Even new lumber could have some left over metal in it from tags attached at the store. In some cases lumber is joined with bands that have been stapled, and they may remain there and cause injury later.

TIP! Fly cutters are quite dangerous. Paint the tips of the fly cutter with fluorescent paint.

Be sure to use appropriate protection for your ears. Machines can be noisy and damage your hearing. This can impact the quality of your hearing over time. You can get disposable ear plugs or invest in a high quality pair of headphones. Make sure you wear them when working with woodworking tools.

Before purchasing any new tools, see if there are any you can rent out. Renting a tool that you’re using just once or twice will help you to figure out if it’s something you really need. The renter can also show you how to properly use the tool.

TIP! There are typically lots of saws in a shop. You have circular saws, miter saws, table saws and a variety of other saws used for specific cuts.

Is there a screw that needs tightening, but it is located in an unreachable spot? The answer is in your toolbox. Grab a long handle screwdriver and a 12 point socket. Place the socket on the screwdriver, and then attach it onto your best ratchet.

You need a good clamp to glue pieces of wood together properly. This will keep them in place as the glue dries. Clamps vary in shape and size, so use the one that is right for the job. Some projects will require multiple clamps.

TIP! Plan out just how you’ll use your woodworking shop. You want to create enough space that it is easy to move around the tools.

Enjoying woodworking with a couple beers may sound fun. Just remember, drinking while you work with a saw can have disastrous consequences. Avoid drinking alcoholic beverages while working with tools. Also, you never want to use illegal drugs or prescription medication when woodworking.

Use drawers to your advantage in the shop. With efficient drawer spacing, one room can hold a plethora of tools and supplies. Also, you should put tools that are similar all in one place. This will help you to save time when you are searching. Be organized when you’re storing the tools you have for later use.

TIP! Whenever you’re doing a woodworking project, always stick to the instructions. While short cuts may be tempting, those steps are included in the directions because they are necessary for best results.

Always be cautious when working with a table saw. When crosscutting, make sure you use a block clamped onto a fence to set the cut length. This is safer than just using the fence directly, as it prevents the wood from kicking back. This clamping method leaves the end of the board accessible for cutting.

PBS offers a variety of woodworking shows you can enjoy. These shows help teach a variety of woodworking skills. If you learn best by watching step by step instructions rather than reading them, this can be a great learning opportunity for you. If you happen to miss an episode, you can catch it on the Internet.

TIP! If you can’t see dovetail joints, they’re a waste of time. In addition, many projects will not look the best if these joints are visible.

Always listen for family and friends that wish to sell their houses. Your skills at woodworking are a great opportunity for you to get some extra money and to help them to raise the value for their home. Projects can be as small as crafting a new mailbox and post to as large as installing new kitchen cabinets.

A large clamp may be necessary if you’re gluing something together. If you lack the supplies, think about getting a pipe clamp. All you need to do is ask the staff at the hardware store to cut the pipe and thread it and you’ll be good to go.


Be on the lookout for discarded furniture. A lot of times, you can get furniture for free, or very cheaply. Always review your options before deciding. You may be able to salvage the drawers of an unusable dresser and re-purpose them as bookshelves.


As you can see, these tips will help woodworkers of all skill levels. This article has taught you something which will help your future projects. It’s time to start that project!

Business meets nature