Using The Right Equiptment For Your Woodworking Project

Stair gauges may be just the ticket for crosscut guides. Clamp your carpenter’s square to your stair gauges while ensuring they coincide with the rise and run of your stair jack. Then you should mark all of the notches. When you clamp them on the one tongue of the carpenter’s square it will become a […]

Read This Article, Master The Topic Of Woodwork

You can use stair gauges to make crosscut guides. To use, clamp the gauges to a carpenter square. After that the notches can be marked. If they’re on the same carpenter square’s tongue, that combination can create the perfect guide for a crosscut using a circular saw. If you work well with your hands, try […]

Simple Tips And Tricks About Working With Wood

Use a pre-stain wood conditioner before applying a stain. This will reduce the risk of irregularities and blotches in the final product. Such conditioning agents smooth the wood surface and let stains sink in evenly. TIP! Consider making your own sanding blocks that are reusable. You will need three-quarter-inch plywood cut into six blocks. You […]

Good Solid Advice About Woodworking That Anyone Can Use

As with anything involving power tools, safety is the number one concern in woodworking. Always start a job with the proper safety gear and follow instructions for using the tools properly. Safety guards are on tools for a good reason and should never be removed. You don’t want to start in your workshop and end […]

How To Put Your Workworking Skills To Practice

Reusable sanding blocks made by yourself will save money. Use your scrap pieces of 3/4″ plywood and cut as many blocks as you need for the sandpaper grits you use the most. Try to be certain that they measure roughly 2.5 inches by 4.75 inches. Spray some adhesive on your blocks and on the cork […]

Want To Learn About Woodworking? Now’s Your Chance!

Consider making sanding blocks yourself that you can reuse time and again. Begin by cutting some 3/4 inch plywood into blocks. They should be 2.5″ by 4.75″. Spray adhesive is what you use on both the blocks and cork tile square. Put one block on the cork, and then cut it flush with a knife. […]