Test stain in an area that will not be seen or on a scrap piece of wood. Then, you can stay away from any surprises if the stain looks differently after application. This simple testing tactic lets you counter the unpredictability of wood.

TIP! When you’re using finishes or stains you should always stir them instead of shaking them. Ingredients can settle to the bottom.

If you are great with your hands, woodworking may be of great interest to you. Woodworking has been around for many years. Wooden projects are often appreciated. The following techniques will help you develop the skills necessary to complete a variety of woodworking projects.

When creating your budget, never forget to add the each new tool that you will have to purchase. It is easy to miss the extra expense when you are too busy thinking about the cost of the wood. Still, tools can get expensive, so you have to think about them.

TIP! If you are renting a tool that’s new to you, ask the company you are renting from for a quick tutorial. A lot of the time they will have specialists that you can get help from so that you can be comfortable with how a tool works before using it.

Consider making your own sanding blocks that can be used again and again. Start by cutting six blocks from scrap 3/4″ plywood for every sandpaper grit you generally use. Your blocks should be 2.5 x 4.75. Put adhesive spray on the blocks and your cork tile square. Use a utility knife to cut the cork flush after sticking a block to the cork. This piece should then fit you hand fairly well and be secure enough to not slip. Fnally, make sure you cut sandpaper flush with the cork, and label every block.

Know all about the wood you are getting prior to purchasing it, especially if you plan to stain it. Paint grade refers to low quality wood, for instance, while stain grade refers to better gain pattern used for staining. Veener and particleboard are different too; particleboard may absorb too much stain, and veener may not absorb enough. Choosing the correct piece of wood helps turn the project you work into something special.

TIP! While you might like keeping a small ruler handy in your pocket, you probably find that it falls out every time you bend over. Get a metal one and keep it in the pocket that has the little telescoping magnet for picking up loose screws.

Determine the best wood for your project. In woodworking, different types of wood handle have different levels of stress tolerance. Learn as much as you can about the different varieties of wood before beginning any woodworking project.

You should have a good understanding of the different types of wood available to you and their many characteristics. Each type is different. They all react differently when you apply stain. Different cuts will splinter differently. The variety of different wood grains is astonishing. Take these different characteristics in mind when planning a project.

TIP! If you have interior doors that are starting to come loose, you can easily remedy this problem with golf tee. Take the door off its hinges, then remove the hinges themselves, then tap the tee into the screw hole.

As you work through your budget, make note of any tools that will be necessary for the tasks you have in mind. This is simple to overlook when creating that budget, but one that is necessary. But if there are things you are going to need that you don’t have, they can be budget breakers if you aren’t careful.

Be sure you have the right kind of ear protection. The machinery used for woodworking can be very noisy. Continued exposure to the noise can cause some hearing loss. Headphones or throw away ear plugs are both good protection options. You must remember to use them every time you operate noisy equipment.

Gel Stains

Go to yard sales, garage sales, and online to get better deals on woodworking equipment. You can get good prices on quality tools when you purchase them used. This will save you a lot of money when you are just starting or need to replace something.

TIP! You shouldn’t be applying too much pressure when sanding. When you put pressure on your wood while sanding, you can create an uneven surface.

One of the more recent developments in stains are gel stains. Gel stains attach to wood better, as liquid stains run. Gel stains will create a more consistent finish on pieces, as well.

Before you sand, wet the surface you plan on working on. This will help to raise the grain. When you do this, then this helps to do away with those very fine scratches. It also gives your finished product a sleek look. In addition, this can save unnecessary work in the future.

TIP! You can make accurate cuts by choosing to use a drafting square. When cutting wood from afar (two to three feet in range), it may be very tough to be accurate.

Avoid using your fingers as guides while cutting narrow pieces of wood. It is a better idea to use a long, narrow piece of wood as a tool to guide it through the blade. That means you get to keep your fingers, which means you get to keep woodworking.

Always go back over your measurements. Indeed, it often pays to check them three times if your materials are especially costly. Make sure that you measure properly before you start. Measuring will help you avoid cutting your lumber incorrectly.

TIP! Before you use wood stains on your projects, prepare the wood to absorb it evenly. That means using a wood conditioner.

Before you pull out the glue, make sure the pieces you want to glue fit together properly first. If you make adjustments after you have glued the pieces, you might damage something. Dry-fits help you see what components go in what locations.

Keep yourself from over-purchasing tools, hardware, wood and other types of supplies. Buying too much means you will have excess things around that you have no use for. Just buy what you need for the current project.

TIP! When using a fly cutter, you may find it is extremely dangerous. Paint the tips of the fly cutter with fluorescent paint.

You should check the condition of your blade before you start sawing. A dull blade can’t efficiently get the job done. It can also cause mistakes that are costly, depending on the wood you use.

When it comes to woodworking, think about re-making items that you have previously made. Practice makes perfect, so doing the same project more than once gives you the chance to improve personally. You can always use another chair, for instance. If not, sell it to someone else, or give it away. That will help you to enjoy practicing your techniques.

TIP! Dust your work area regularly. Hardwood dust is typically more of a health concern than softwood dust, but this isn’t a hard and fast rule.

Do not become too much of a perfectionist with your tape measures. Try using a story stick, gradually working your way to cutting. Cutting on your scrap wood first will be a great idea so you can test a fitting out. When you plan your cuts properly, you’ll do a better job.

Attempt to store power cords over your head in the shop. It’s always a smart idea to have the ability to plug in any equipment you need above your head. This is because power cords can be tripping hazards. This will also help reduce the strain on your back from plugging in the cords.

TIP! A Shop Vac is a handy accessory to your work space when it is time to clean up. These all purpose vacuums can clean up everything from the finest dust to small chips of wood.

If you are just starting a project, make sure to read the plans many times. Be sure you know what they say and that you really have an understanding of them so you know if they’re missing anything. If you are having difficulty understanding them, visit your nearby home improvement store for some help.

Do not drink or do any drugs when you are working on a project. A sweltering afternoon might seem like the perfect moment for a cold one, but the results can be truly regrettable. That applies to medication, even ones that are over-the-counter. Do not take medications that affect your mind or motor skills when woodworking.

Protect your eyes when you are working on a project. So always wear your safety goggles to prevent eye damage. Be sure to wear goggles that fit well.

If you are working on a large piece that will need clamping, you will need to use a large clamp. A pipe clamp will be a great help. Someone at the local hardware store can help you cut and thread the pipe.


You should have a few essential tools before you start working with wood. A hammer is a necessity. Choose a claw hammer for the best results. Select one which feels comfortable when you hold it. Avoid picking out a hammer that feels too heavy.


You can use your hands when you do woodworking. Now that you know more about woodworking, you’re ready to make your own pieces out of wood. Take the advice provided to you here and become an expert in this craft.

Business meets nature