When using stains or finishes, be sure to stir them, rather than shake them. Certain ingredients in such items tend to settle with time. Shaking can cause bubbling and prevent it from mixing well. Be sure you stir it up until your mix is dispersed correctly and in a smooth manner.

TIP! Gel stains are great for staining furniture pieces. Gel stains can stick to lumber well, while liquid ones can run.

Have you been wondering if woodworking is easy? Don’t you just cut work and put the pieces together? Actually, there is a great deal that you can learn about woodworking. In fact, the more you know about it, the more enjoyable it can be, so check out all of the tips which follow.

Use your tin snips to make quick work of trimming wood laminate. They make cutting the laminate to the right sizes effortless. This will improve the overall quality of your project.

TIP! When you have woodworking pieces ready for final assembly, always remember to run them through a quick dry-fit before you break out the glue. If you try adjusting things post-gluing, there’s a big chance that you’ll damage something.

Use pre-stain conditioner if you plan on staining your project. A good pre-stain condition helps to even out any imperfections in your project that a stain can accentuate. They will make the wood smooth and allow the stain to go on evenly.

Every shop that does woodworking needs to contain a stair gauge. They are used most often for laying out stair jacks, but they can also be used to clamp carpenter squares. This will make the carpenter square into a circular saw guide. When you use this square, you’ll cut perfectly straight every time.

TIP! Know the characteristics of any wood before you buy or use it for a specific project that requires staining. Paint grade wood is generally of lower quality and stain grade has better grain patterns.

You should always test stain on a small area or on a wood scrap. This will help you avoid any surprises if the stain color looks different after it has been applied. This simple testing tactic lets you counter the unpredictability of wood.

Be sure you have a good blade before sawing. Dull blades can make it hard to do as much sawing as you want. Additionally, dull blades can cause you to make errors that can cost you money.

TIP! Wear strong, closed-toe footwear when you are doing woodworking. There are sure to be lots of nails, tools and wood chunks everywhere you step.

Stir your finishes or stains rather than shaking them. The ingredients in them can settle. Shaking too much can cause bubbling to occur, and also prevent it from mixing well. Stir for at least five minutes so that everything is even.

Don’t only rely on a tape measure. Story sticks can be useful and you can work in small increments up to your cut you want to make. Scrap wood cutting is smart and means that you are able to try out a fitting. Variety in planning your cuts also keeps boredom from becoming a factor in your project.

TIP! Recycled wood should be sought out. Scraps can be discarded which are a boon for your projects.

Be sure you have some kind of an idea of what you can budget your money on. It is easy for your eyes to be larger than your wallet. It is very disappointing to run out of funds before your project is complete. Do the math before you start, and you can avoid an unpleasant surprise.

Look all over the Internet, local garage and estate sales to find great deals on items you need for woodworking. Buying used can help you save a lot of money. As a result, you can save money on your woodworking projects.

TIP! When you plan to do your woodworking project, make sure to choose the wood that is appropriate for the item. Don’t use woods that are soft like pine when making a table top; soft woods scratch easily.

When you are budgeting for new projects, don’t forget to set aside money for any tools you need. It’s easy to forget this when you are just focusing on the cost of the wood. But, if you need other things that you don’t own and didn’t think about, you can really mess up your budget and may not be able to finish your project.

Don’t push too hard when you sand. Pressure can make the surface uneven. Using sandpaper of an appropriate grit level will reduce the amount of force required. Use a circular motion to lightly sand.

Gel Stains

There are a couple tools you need to have when you start doing a project. If they aren’t already in your shop, get a nice driver or drill, a power sander, and three saws: circular, jigsaw and a small table saw. While an orbital sander would be ideal, any power sander will do.

TIP! When taking on a woodworking project, devise a budget. Once you choose a project, take time to estimate how much the materials will cost.

Gel stains are great for staining furniture pieces. Gel stains will stick better, while liquid stains can drip. Not only that, but gel stains tend to be thicker than liquid, so that the pigment is consistent, which makes for a more even stain on vertical and horizontal pieces.

Keep yourself from over-purchasing tools, hardware, wood and other types of supplies. You have to store what you buy, and you may not have that much room. Rather, you should really only buy what you will need today or in the very near future.

TIP! Inspect wood for metal, screws, or nails before you cut into it. This may seem to be a silly process; however, it is one that you should do.

If you rent a tool that is unfamiliar, ask the rental company to give you a quick tutorial. Many times the people who work there will give you a quick demonstration on how to correctly use the tool. Also ask for a pamphlet if they have one.

Fly cutters can be dangerous. If you want to make the arm and bit easier to view so you are able to avoid them, try painting tips with some fluorescent paint. This will help you keep out of the way when you are cutting the wood.

TIP! If you can’t seem to remember the measurements, jot down the measurements on your saw blade. Do this on both sides.

When you are cutting narrow pieces of wood, never use your fingers to guide them. Using a piece of wood as a guide is much safer. This will help ensure you keep all of your fingers, making woodworking much easier.

Buy cheap wood if you’re a beginner. In your early days of woodworking, you are going to make a lot of mistakes and need a lot of practice. Do not waste your money on high-quality woods for practicing.

Particle Board

Know where the wood came from that you’re using. It was once a part of a majestic tree that gave itself for someone to create something beautiful, so don’t ever take that piece of wood for granted. Do not waste wood by making inaccurate cuts.

TIP! Even though a dovetail joint might look really nice, if you can’t see them, it may not be worth using. That said, not every project will look good with these joints visible.

Get to know the general properties of any wood you are buying, especially if you want to stain it later. Wood that is paint grade is not high quality. On the other hand, wood that is stain grade will stain better. Also know that veneer and particle board are really quite different. Veneer tends to absorb too little stain, while particle board too much. Using the right wood ensures that your project will turn out just as you expected it to.

Woodworking involves more than the right tools and techniques. Keep in mind what you desire of the finished product. Employ a philosophy of “keep it simple” to make sure you don’t overdo it.


Choose the correct nails when starting a project. Too large of a nail can split your wood, resulting in it not holding properly. In addition, if you pick up something that is too little, it won’t be big enough to do the job correctly. Therefore, it is vital that you find the appropiate size nail for your project.


Do you know more about woodworking now? If you do, you can now see what benefits woodworking can have on your life. There are many practical and monetary benefits that this trade can offer.

Business meets nature