You can use stair gauges to make crosscut guides. To use, clamp the gauges to a carpenter square. After that the notches can be marked. If they’re on the same carpenter square’s tongue, that combination can create the perfect guide for a crosscut using a circular saw.

If you work well with your hands, try woodworking out. Woodworking has been enjoyed for centuries. Great wood pieces are greatly appreciated in this age.

You should have at least a working knowledge about the most common woods and their characteristics. All wood is not the same. Different types of wood will stain differently. Different cuts will also splinter differently. You will also notice many variations in grains. This is all important as you embark on your next woodworking project.

TIP! Before doing any saw work, make sure the blades of the saw are good and sharp. A dull blade will make it nearly impossible to cut something as needed.

When using stain, try a test on a small scrap you may have available or in an area on the wood that will be out of sight. This makes sure that you won’t run into any surprises. Wood can be unpredictable, so you can avoid mistakes and disappointment by doing this simple test.

Buy nails in the right size and of the right material for each job. A nail that is too large in diameter will often split the wood, causing it not to hold properly. In addition, if you pick up something that is too little, it won’t be big enough to do the job correctly. You need to figure out what size is going to work right for your project.

TIP! Protect your ears. Machinery can be very loud.

Pick out the wood that’s right for your project you’re doing. Some pieces require a durable hardwood, while others can be done with a softer type of wood. If you don’t know how different types of wood will work, spend time learning about both the wood and the project you wish to complete.

Is there a screw that is in a difficult to reach area? Look to your toolbox. Use your 12 point socket with your long handle screwdriver. Place the socket on the screwdriver, and then attach it onto your best ratchet.

TIP! If you are a woodworking novice, always look over your plans before starting a project. Be sure you have a full understanding of what you need to do, and make sure the information is complete.

If woodworking is something you just started working with, one good thing to do is to carefully read through all the plans before getting started. Review them to make sure there isn’t any information missing. If they don’t seem to make sense to you, ask an expert for their opinion.

Check out Craigslist and estate sales to find great supplies. You’ll be able to find great deals and tools that professionals use for cheap if you buy things used. You will save a lot of cash when you buy new tools buy looking for used tools first.

TIP! You don’t want to use just any wood for your projects. Think carefully about the right kind of wood for what you’re making.

Search at estate sales, garage sales or even online if you wish to get a good deal on equipment that you need for woodworking. This is a great way to find good deals. You will end up saving lots of money which can then be applied to your woodworking projects.

Keep in touch. Your workshop may be a small, personal space with no access to the Internet. There may be times when you get stumped on a project. Talking with other woodworkers will help you get the answers you need. You’ll have little to no problems because people have probably already have written something about it.

TIP! Keep a lookout for old furniture that people are going to throw out. These pieces will often have useful pieces of wood you can use yourself.

Beer is enjoyable on a hot weekend. However, working with a saw and drinking is a terrible combination. Avoid alcohol when working with woodworking tools. Don’t use prescription drugs either.

Don’t apply too much pressure when you’re sanding. When you sand with a lot of pressure, you’ll gauge into the wood and cause the surface to be uneven. If the sandpaper that you are using is the right grit, force will not be needed. Use circular motions with light pressure to sand.

TIP! Using a drafting square can help your accuracy when performing smaller cuts. It is sometimes tough to get accurate measurements when attempting to cut in the range between two and three feet.

Keep an eye out for used furniture that you could pick up. You can find wood for free that can be reused. Think about the possibilities before you dismiss anything. Perhaps the drawers of an otherwise unusable dresser can be used to create a unique bookshelf.

Patience is a requirement. A lot of people begin working on a project and then get frustrated because it doesn’t work out the way they planned. Your finished piece is there, you just have to make it. If you’re patient, you’ll see that you can keep your focus on your work. Soon enough that project you’re working on will be finished!

TIP! Plan your wood pieces on paper before you get started. Writing down your budget and blueprint allows you to control the process.

When you decide to take up woodworking, there are a couple of essentials you will need to buy first. Firstly, buy a hammer. A claw hammer is one of the best that you can get. Pick a hammer that fits best in your hand. You won’t want to be using a hammer that weighs too much.

Always make budgets for your woodworking plans. After choosing a project, sit down and calculate how much the materials will cost. Come up with a list of everything you will need and the cost of each item. You don’t want to have to stop a project just because you don’t have the money.

TIP! Save the scrap wood you have for later projects. You can never tell when you’ll need a bit of wood for filling a gap or something else.

You can use a stair gauge to guide circular saws. They’re normally used to mark stair jacks. Using both on a carpenter square’s tongue can help guide a circular saw.

Before cutting any piece of lumber inspect it for nails, screws or other types of metals. Even with new lumber this is important to make sure you don’t have an accident. Sometimes your lumber may come with bands around it that are stapled there. These can cause an injury if you don’t pay attention.

TIP! Always chisel away from where your body is. It is hard to predict when your chisel might slip and end up stabbing you in your hand.

Before you sand something, you should get the surface a little wet. Water raises the grain on the surface of the wood. This helps to get rid of small scratches in your finished piece. This gives a professional appearance to all finished woodworking projects. It could also make you sure you’re not doing extra work later.

Prior to purchasing a tool, think about renting. Renting a tool a couple times can help you see if you actually need it or will actually use it. You can also ask the person or company who owns the tool to show you how to use it.

TIP! You want to understand how you’re going to use a woodworking shop when you are setting it up. You want some room so that you can freely move around.

Make sure you are double checking your measurements. You might want to check them three times just to ensure that you aren’t wasting money on expensive items. Mistakes are frequently made at measuring time. If you make an angular cut or cut a piece too short, you can mess up a project entirely.

Use drawers to your best advantage. With efficient drawer spacing, one room can hold a plethora of tools and supplies. Also, you should put tools that are similar all in one place. Any extra space is worthless if you’re unable to find your tools. Store all tools in a logical manner.

Power Sander

If you are nailing something, always try to make an initial pilot hole where you would like the nail to go. Use a slightly smaller drill bit for best results. Keep tapping the nail, and when it grips wood, hammer it with an even force and straight motion.


There are a number of power tools you should have in your possession before starting woodworking. You should ensure you have a jigsaw, circular saw, small table saw, drill or driver, and a power sander. Ideally, you want an orbital sander, but you can still work with a regular power sander.


Woodworking is a hobby many people enjoy. Since you just read a great article about woodworking, you should be ready to begin creating wonderful pieces on your own. Use what you’ve gone over here and your skills should be vastly improved. You may even now be an expert!

Business meets nature