When doing any woodworking project, safety is a big concern. Be sure to follow all safety directions when using power tools. Never take the guards off the power tools that you use. The guards are there to keep you safe. You don’t want to begin a project and get seriously injured.

TIP! Keeping a ruler in a pocket can be a good idea, however sometimes it can be frustrating if it falls out. Buy a metal ruler, and try keeping it in the same pocket as the smaller telescoping magnet you use to pick up loose metal screws.

Do you love to work with wood? Is it something you have done previously, or are you currently creating wooden masterpieces? Regardless of the woodworking done, the art itself is delightful, and this piece is full of good information. Continue reading and you’ll learn a lot about woodworking.

Do you have door hinge screws that have worked themselves loose, and you can’t tighten them into the wood at all? A golf tee can solve this. Take the door and its hinges off of the frame, then, tapping gently, place golf tees into the screw holes. Trim the excess wood and put the door back into place. The golf tee gives the screw something to bite into.

TIP! Be certain you use the right nail size for any project. Nails that are too wide tend to split the wood, weakening the hold.

Before you apply a stain, test it on an area that is hidden or a piece of wood scrap. This will help you to pick the right stain color for your project. Wood is unpredictable so you’ll want to test it first.

Is there a screw that is in a difficult to reach area? Your toolbox has answers. Grab a 12-point socket and your long-handle screwdriver. Place the socket on your screwdriver, then attach this to a ratchet.

TIP! Use premade woodworking kits if you are new to it. You can find kits that come with some pre-cut pieces.

Be sure you have some kind of an idea of what you can budget your money on. You don’t want to start on a project and then realize you don’t have the money to finish. It is very disappointing to run out of funds before your project is complete. Create a budget before you start so that this never happens.

Build your own sanding block. Sanding is much easier with a sanding block, but it is not necessary to purchase a commercial holder for sandpaper. Simply use plywood that’s scrap to create your own. You can use these to create sandpaper as well.

Gel Stains

Check the wood stain out that you’re using on a spot that’s inconspicuous first. Your stain may appear differently than anticipated, or it might not go on smoothly. Testing it will allow you to change things. This will ultimately lead to less work.

Gel stains are fantastic when you stain furniture. Gel stains will adhere much better to your wood. Also, gel stains are thick and their pigment stays consistent.

Just one extension cord is always safer that a tangle of cords linked together. Plug in only the tool that you are using and leave the rest unplugged. This simple safety tip can prevent electrocution and tripping hazards.

TIP! Television can be a surprisingly good resource. Watch a few woodworking programs on TV.

Ask the rental company for a speedy tutorial when renting a tool you aren’t completely familiar with. Many times, they have specialists that will show you how to use the tool properly and safely. Ask the company if they have detailed instructions you can take with you as well.

You should take a look at the plans other woodworkers share on the Internet. Although you might not follow what they do to a tee, their projects might spark an idea to help you create a better plan for your project. Whether the plans give you new ideas or calculations you didn’t previously consider, you’ll benefit.

TIP! Make sure you know everything that needs to be done before you get started. You certainly don’t want to realize halfway through your project that there are mistakes in the plans or you forgot something.

Never guide wood through a table saw with your fingers. Using a piece of wood as a guide is much safer. This will help ensure you keep all of your fingers, making woodworking much easier.

Wear tight or well-fitting clothes when working with your power tools. Many accidents have been caused by loose fitting clothes. In order to help keep yourself protected, a fitted shirt can be worn, tucking it into your pants. Steel toed boots can also protect your feet if you drop something.

TIP! High quality tools are a good investment. Cheap tools break often and can leave you injured.

Every shop that does woodworking needs to contain a stair gauge. They are used often to layout jacks for stairs, but they can also be clamped to your carpenter’s square. This will make them into guides for a circular saw. When you use this square, you’ll cut perfectly straight every time.

Inspect your lumber for any debris or nails before cutting. You may not think that there are nails or other metal pieces in new lumber, but this is not the case. Lumber is sometimes bunched together with stapled bands that can remain.

Metal Ruler

Choose cheap, scrap, or damaged wood when you are doing your first woodworking projects. Your initial days of woodworking are going to mean a lot of trial and error. Do not waste your money on high-quality woods for practicing.

TIP! When it comes to woodworking, think about re-making items that you have previously made. Practicing can help you perfect things, so repeating a project will give you the opportunity to do it better.

A small metal ruler is handy to carry around in your pocket for quick measuring. It has a tendency to fall out of your pockets, though. Get a metal ruler instead, as well as a small telescoping magnet for picking up loose screws. Keep them both in the same exact pocket. The magnet should keep your ruler in the pocket.

Always get rid of the dust in your woodworking space. Hardwood dust is typically more of a health concern than softwood dust, but this isn’t a hard and fast rule. Even some kinds of softwood dust don’t need much exposure to your body to cause irritation and even allergies. Always protect your eyes, mouth, nose and skin.

TIP! Drawers can be very useful. If you efficiently use drawer space, it is possible to fit many tools in a small area or room.

Learn as much as you can about different woods. Every block of wood is unique. Different woods take stain differently. Different cuts will also splinter differently. You will also see different types of grains. All these factors will influence the way you work on your wood block.

If you need to use a woodscrew, it almost always best policy to drill a hole beforehand. This is called a pilot hole. Trying to screw without having a hole there may cause the screw to spin aimlessly and destroy the wood. If you do not have a drill, try lightly hammering the screw.

TIP! PBS will show do it yourself shows related to woodworking. These shows help teach a variety of woodworking skills.

Before beginning to cut any wood, ensure your blade is sharp and in good working order. Dull blades rip wood apart. It will also increase your chances for error, which could cost you money in the end.

Painter’s tape is an often forgotten, but is an important tool needed for a workshop. Use it to cut straight lines so that the wood doesn’t splinter. Additionally, this tape can be used to prevent glue from hardening up on the outside part of the wood.


Have you ever had trouble reaching certain screws using just you hand the the screwdriver? Look in your toolbox. Grab your 12-point socket and a long-handled screwdriver. Place the socket on the screwdriver and place it atop a ratchet.


Wear safe footwear when you are in the shop working on projects. This is necessary since your work area may be full of wood chips, nails and all types of tools. You want to make sure you’re preventing your feet from injury. The shoes you wear must be sturdy so as to protect your feet from injury in your work environment.


You should light your work area well. Measurements must be accurate when working with wood. Additionally, you are working around dangerous, sharp tools. These activities mean that you must see properly to avoid mistakes and injury.


If you are yearning to get into woodworking, there’s no time like the present. Do not get intimidated, just focus on using this advice. It does take time to get better with woodworking. You just have to practice and be creative.

Business meets nature