If you’re using stain, test it first on a scrap of wood. This ensures that the stain will look as you expect it to once done. This will go a long way in preventing disappointment.

TIP! Opt for gel stains when staining furniture. Gel stains adhere to wood better, while liquid stains run a lot more.

If you have ever seen a hand-made wooden chair or even a beautiful wood carving, maybe you have wondered if you have what it takes to be a woodworker. It can be hard to find sufficient information on woodworking, so this article ought to help. Learn from the tips to become a better woodworker.

Avoid using your fingers as guides while cutting narrow pieces of wood. Use a thin piece of wood instead. Use it to guide the wood through the saw. This will ensure safety while you perform dangerous tasks.

TIP! Every shop that does woodworking needs to contain a stair gauge. They are generally used for laying out stair jacks, but they can be used to clamp carpenter’s squares.

Make sure you use the right kind of wood appropriate for the task at hand. Some woods cannot handle the same stress that other woods are able to. If you haven’t been working with wood for long, take the time to educate yourself on the wood.

Learn about the wood you want to use before you try to stain it. Lower quality wood will be called paint grade. Stain grade will be of higher quality and have a nicer finish. Particleboard and veneer differ from one another. Veneer doesn’t always absorb enough of the stain, and particleboard over-absorbs it. Your project will turn out better if you make sure you get the right wood.

TIP! It is handy to carry a small pocket ruler, but it may fall out whenever you bend over. Make it a metal ruler and store it alongside your telescoping magnet.

If you need to rent a tool for woodworking, lease one from a tool company and ask them how to use it. Oftentimes, they have someone available to train you with the tool. You should also ask if there are any handouts available that will familiarize you with the tool.

Make sure that you have the proper ear protection. Working with wood can be very noisy. Exposing your ears to these things for a long time can cause hearing loss. You can either purchase a high quality set of headphones or use disposable ear plugs. Whatever you choose, make sure to use them when operating machines.

TIP! Always employ safety practices when using a table saw. While crosscutting, it is important that you use a block properly secured on the fence when establishing the cut length.

Don’t use your fingers to guide your cutting. What you should do instead is use a thin, long strip of wood that will help you push the wood through. This will ensure safety while you perform dangerous tasks.

Always keep your ears open for friends and family that are looking to sell their home. Skills in woodworking may come in handy to earn some extra money by increasing the value of a home. You can make a post for the mailbox or take on an entire kitchen rehab.

TIP! When you first start out with your woodworking, try using some kits that are available. These kits come with pre-cut pieces of wood that you put together to make a certain project.

Dry fittings prior to glue application are always a good idea. If you attempt to readjust the pieces once glued together, you risk damage to your project. A dry fit is going to help you figure out what goes where.

Make your own reusable sanding blocks. Sanding blocks make sanding much easier for you. Simply use scrap plywood to make your own. Just cut a piece of wood and use adhesive spray to attach the sandpaper.

TIP! Wet surfaces before you sand them. Wetting a surface will bring up the grain.

Know the different characteristics of the woods that you’re using in your projects Every kind of wood will be different to work with. They all react differently when you apply stain. Splintering varies among cuts. The variety of different wood grains is astonishing. All of these factors have an effect on your wood project.

Drafting squares help you be precise with your cuts. When cutting wood from afar (two to three feet in range), it may be very tough to be accurate. Drywall sections are often inaccurate, but carpenter type squares must be attached to an edge, so they are difficult as well. Check out drafting squares at your local art supplier. They are simple to use and very accurate.

TIP! Watch woodworking television shows. They can teach you quite a bit of new information while giving you some ideas on future projects you may want to work on.

Be sure that you have a blade that in great condition before sawing anything. Dull blades make sawing nearly impossible. It can also cause errors that will cost you a ton, depending on the wood type you use.

Be sure to make a reasonable budget for woodworking. One you decide what you’re going to make, sit down and calculate the costs. What do you need? What will it cost? You want to make sure you can actually afford what you want to do.

TIP! Don’t throw away scrap wood! Scrap wood can be used to fill gaps or for clamping. You can also use them for practice cuts.

Add some extra spring to your grip. There are a few times you need a spring clamp, when you can only use one hand. It can be tough to open such clamps with a single hand. There are ways to make this easier. Use two hands to put your clamps onto a piece of scrap wood. This will make it much easier for you to use them with just one hand.

You should not ever work with power tools or saws while wearing loose fitting clothing. Loose fitting clothes can result in an accident. Wear a tight shirt and pants to avoid injury. Steel-toed boots keep your feet protected if you drop wood or tools on them, too.

TIP! You should always inspect your lumber for screws, nails or metal. This may seem to be a silly process; however, it is one that you should do.

Are you working with a screw in a space that is insufficient for your screwdriver and your hand to fit simultaneously or comfortably? Your toolbox has answers. Get yourself a long screwdriver along with a 12-point socket. Use the socket to place on a screwdriver, and then attach it to a ratchet.

If you double check your straight edge cuts via a circular saw constantly, measure from the blade to the shoe edge and write down the numbers on the shoe itself. Do this on each side of the blade.

Always look for free wood around your neighborhood. Often business will grant you permission to haul off unwanted pallets. Look online for some more ideas.

When you’re trying to build your woodworking shop, figure out how the shop is going to be used. You want to avoid having so much stuff in the space that you are limited in your ability to move around. Make sure you have enough area between the machines. Space is important for a comfortable, safe shop. If your space is safe, you’ll be especially productive.

TIP! Use drawers to your advantage. Lots of tools can fit in drawers if you utilize the space efficiently.

Seek out wood that has been recycled. Many places have scrap wood that you can use. Some home improvement stores have scraps left over. Cabinet businesses and construction companies may give away wood as well. Use this knowledge to your advantage, and go looking for what you need. You can save a bit of money this way.

Use a small piece of wood between the project piece and the clamp. The teeth of the clamp often dent the wood when tightened. When a small square of scrap wood is placed between the two, then teeth marks won’t become an issue.

TIP! Your PBS station should have some DIY shows about woodworking. They show some skills and tools that you may use.

Always be cautious when working with a table saw. Use a clamped block to set your crosscut’s length. This will ensure that the board won’t spring back. By clamping, the board end stays free to be cut.

Getting into woodworking doesn’t mean you need to spend a ton on tools. It is actually possible to rent many of the things you need. If you find that you enjoy woodworking, you can begin purchasing power tools over time. If you’re only going to do one or two projects, consider renting instead.


With this knowledge at the ready, you can tackle any wood project now. If you stick with it and try a few new things every day, soon you will be making more and more intricate pieces with wood. Put the tips found in this piece to good use.

Business meets nature