Use pre-stain conditioners if you’re going to stain the wood. This will help you to get an even finish when you stain. This is because the conditioners allow stains to penetrate evenly.

TIP! Create your own sanding blocks. Cut six blocks from some plywood that you have laying around for every piece of sandpaper that you use.

Do you like working with your hands? Maybe the art of woodworking is made just for you. Down through the centuries, people have created beautiful items with woodworking techniques. This article will give you ideas on how to get better at woodworking.

Stair gauges are very important devices for you to use. With a carpenter’s square these can be clamped down to match up the stair jack. Then put a mark on the notches. You have a great crosscut guide when you put each of them on the carpenter’s square together.

TIP! When creating a budget, don’t forget to itemize any new tools that you’re going to need to buy. It is easy to forget about tools when you are thinking of how much wood you require.

Stair gauges may be just the ticket for crosscut guides. To use, clamp the gauges to a carpenter square. After this, you will have to mark each of the notches. Have the share one tongue of the carpenter square. This is a combination that will provide you and excellent crosscut guide for your circular saw.

If you need to rent a tool for woodworking, lease one from a tool company and ask them how to use it. The people that work for these companies have representatives well-versed in the tools they rent. They can get you up to speed. Ask the company if they have detailed instructions you can take with you as well.

TIP! Don’t guide your saw with your fingers when cutting narrow pieces of wood. It is a better idea to use a long, narrow piece of wood as a tool to guide it through the blade.

Always choose the proper wood for your project. Some woods are better for certain projects than others are. Take the time to learn about different types of wood and the qualities each of them has.

Know all about the wood you are getting prior to purchasing it, especially if you plan to stain it. For example, a wood that has a stain grade is good for staining. A wood that has a paint grade is lower quality. Particleboard and veneer differ from one another. Veneer doesn’t always absorb enough of the stain, and particleboard over-absorbs it. The right wood will help make sure your project comes out how you want it to.

TIP! Make sure that your blade is in good condition before you begin sawing. Dull blades rip wood apart.

If you rent a tool that is unfamiliar, ask the rental company to give you a quick tutorial. Sometimes you can even be taught how to use the tool properly which is usually faster and better than if you taught yourself. Also, ask if they have a pamphlet about the tool.

Use the right-sized nail for the project. Very large nails can cause wood to split, which will prevent it from holding well. If the nail is too small, it cannot provide enough strength to keep the wood together. Always try to pick the right size nail for your job.

Tin Snips

Learning how to read woodworking plans is a good place to start. Make sure they are complete without any missing information. If there is something you don’t understand or something is missing, you could head to your home improvement store to see if someone there could offer suggestions.

TIP! Create a reusable sanding block. Sanding blocks make the task much easier, add control and save you money.

Use tin snips if you are working with laminate. Tin snips let you cut laminate into usable sections easily. Be sure to set aside a designated set of tin snips for woodworking.

Don’t rush. Some people start woodworking projects, only to become frustrated that it doesn’t materialize instantly. Remember that your result is waiting there inside of the wood, you just have to bring it out. Have patience; it will allow you to better focus and continue to work. Soon, your project will be done.

TIP! It is easy to make your own sanding blocks in the sizes you need. Simply cut the wood to the size and shape you need for the job.

Be on the lookout for free wood sources. Some business have excess wood pallets lying around and will give them away if you’ll collect them. Look online for ideas of what you can make with pallets.

Always make budgets for your woodworking plans. Once you pick out a project, don’t forget to sit down and figure out the cost of your materials. Know what you will need and the cost. You don’t want to have to stop a project just because you don’t have the money.

TIP! Before beginning a project, know what you are doing. You don’t want to confuse the directions or not read them because that only leads to mistakes.

Drinking some beer while woodworking may seem like fun. However, drinking and woodworking is a bad combination. Avoid using any alcohol when working on a project. Likewise, do not work on projects while taking medication or illegal drugs.

Don’t throw out scrap wood, it may prove useful in the future. You may need these pieces to fill in small gaps or for clamping freshly glued wood pieces. You can also use small pieces of scrap to practice cuts.

TIP! A fly cutter is a dangerous piece of equipment, so be careful. Some people find that by using a bright colored paint to mark the bit and other dangerous areas reduces the risk of accidental injury.

Listen up for anyone you know personally that is wanting to sell a home. Your woodworking skills might be a good way for you to make a little money by helping them increase the resale value of your home. It is possible to build new mailbox posts, refurbish cabinetry and perform all sorts of useful projects around the home.

If you can’t seem to remember the measurements, jot down the measurements on your saw blade. Do this for each side of your blade. If you find it hard to read, try using a address label or other blank sticker, and write on that.

TIP! When first starting out in woodworking, you should not have to purchase all your tools at once. You should check sites like Freecycle or your family may have extra tools you can use.

Keep an eye out for used furniture that you could pick up. Many free wooden pieces of furniture can be had free, or dirt cheap. Think about the possibilities rather than dismissing things. Even if the dresser isn’t able to be fixed, you may be able to arrange the drawers into a good bookshelf.

You need a good clamp to glue pieces of wood together properly. That will make sure the pieces stay in the right place as they dry. Clamps come in different shapes and sizes for different gluing purposes, so be sure to choose the right one for the job. For some jobs, you may need to use two or even more clamps.

TIP! For quick clean up after you are done for the day, invest in a good Shop Vac. This device will pick up all of the debris from your job.

Something can always fly toward your eyes and cause damage. Never forget to wear your goggles in the work area to avoid injury to your eyes. Be sure to wear goggles that fit well.

The local PBS station should have a lot of do it yourself programs that have tutorials on doing woodworking. They talk about tools and skills of the craft. Some use old fashioned tools while others instruct you in how to use modern power equipment. The step-by-step instructions can give you ideas about how to tackle your own projects.

TIP! You can get started with woodworking without spending a fortune on new tools. You can rent woodworking tools at home improvement stores.

Make sure that the lighting in your workshop is adequate. From cutting to staining, light is a must. This can help you see area where you need extra sanding. Plus, that extra lighting will ensure that you’ve applied the stain evenly.

When you create your dream, there’s a lot more to it than proper techniques and tools. How your project looks is your best end result. Most of the time simplicity pays off when working with wood.

Stair Gauges


Stair gauges are great guides for circular saws. Usually, stair gauges are for matching the run and rise of stair jacks to match the notches up. Using both on a carpenter square’s tongue can help guide a circular saw.


As the saying goes — measure twice, cut once. You might want to check them three times just to ensure that you aren’t wasting money on expensive items. More people make costly mistakes when measuring. If you make a wrong cut, it can totally ruin a project.


You should take some time to watch different woodworking shows available on television, or even the Internet. These shows offer you tips and tricks along with visual how-tos. If you’re not sure where you can discover such programming, just look through your television listings.


You can use your hands when you do woodworking. You now have tips to help you with this enjoyable hobby. Use these tips to better your woodworking skills up to an expert level.

Business meets nature