When you make your budget, remember to itemize tools that you have to buy. You might overlook that when you think about how much wood will cost. But if there are things you are going to need that you don’t have, they can be budget breakers if you aren’t careful.

TIP! Gel stains are great for staining furniture. Gels stains seem to hold onto the lumber better where liquid stains have the tendency to run when applied.

There’s a lot to woodworking. There are many techniques and skills involved in creating awesome things. If you like the idea of woodworking, then be sure to read this article completely. They’ll give you a basis of knowledge to build off of.

If you rent a tool, ask for a tutorial on how to use the tool. There are usually specialists available to get you comfortable using the tool more quickly than learning it by yourself. You can also ask them if they have some kind of a handout that gives tips on what you can do with the tool.

Wearing Safety Equipment

Learn more about different kinds of wood and their characteristics. Wood varies from type to type. Different types of wood will react differently to various stains. Also cuts that are different will have splintering effects that are different. You will also see a wide range of different grains. These are all variables to consider when working with wood.

TIP! Increase the strength of your grip. There are a few times you need a spring clamp, when you can only use one hand.

Safety always comes first. Be sure that you use the tools as they’re supposed to be used while you’re wearing safety equipment. When your power tools are on, you should always be wearing safety equipment. You don’t want to begin a project and get seriously injured.

You should use more than just tape measures. Story sticks are good to use, and you can slowly work up to your cut. Cut on scrap wood initially; this allows you to try out a fitting. Having a lot of ways you can plan on making a cut can keep boredom at bay.

TIP! Keep a lookout for old furniture that people are going to throw out. These pieces will often have useful pieces of wood you can use yourself.

Stair gauges can be used as crosscut guides. Fix them onto the carpenter’s square, taking care to note that they are a good fit for the stair jack. Then mark the notches. When you clamp them on the one tongue of the carpenter’s square it will become a good crosscut guide for your circular saw.

Something can always fly toward your eyes and cause damage. So don’t think that you shouldn’t wear goggles or else you may end up injuring your eyes for good. Choose a pair which fit snugly and allows you to see clearly.

Your workbench’s height is important in woodworking. Measure where your waist is from the floor. This distance will provide you with the best height for your workbench.

Always double check your measurements. When using expensive materials, be on the safe side and triple check. Many times, poor measurements will cause costly mistakes. This can completely ruin the piece of wood.

TIP! A couple of key power tools ought to be present before you start woodworking. A driver/drill, table saw, jigsaw, power sander and circular saw are a must.

When you develop a budget, remember to take into account all new items that must be purchased. This can be easy to neglect, since you might just be focusing on the cost of the wood. But, if new tools or materials will be required, your budget may be exceeded quickly.

You can make your own custom sized sanding blocks. Cut the wood exactly how you want and use it. Then you will need to apply an adhesive to hold the sandpaper onto the block, and then let it dry. This will give you a custom sanding block for your project.

TIP! Don’t buy too much material whenever you are shopping for a project. Buying too much means you will have excess things around that you have no use for.

If you rent a tool that is unfamiliar to you, ask the rental company for a quick demonstration. The people that work for these companies have representatives well-versed in the tools they rent. They can get you up to speed. Also ask if they have a user’s guide for it.

Make sure your blades are shape when you use skills saws and table saws. Many woodworking accidents are the result of dull blades. Wood may kick back if you are not using a blade that is sharp. Kickbacks cause a lot of accidents in woodworking. Also, take the time to check and sharpen your drill-bits so your projects go smoothly.

TIP! Write down your measurements to get them right every time. Do this on each side of the blade, and if you can’t read it well, use something like an address label to write the measurements on.

Add spring to the grip. Sometimes you need to utilize a clamp and you only have one hand available. It is sometimes hard to get these things open when you’re only using a single hand. Thankfully, there is a tip which can help. Before gluing anything, first put clamps on scraps of wood. This allows you to use one hand because it will put them close to their maximum capacity.

You may want to consider renting some tools rather than buying. If you are considering buying a new tool, rent it a couple of times to see if you actually need it. This is also a great opportunity to ask a professional to show you how to use the tool you want to rent.

TIP! Think about revisiting projects you’ve worked on in the past. You will find that you come up with new and better ways to do those projects thanks to practice.

Ear protection is important. A wood shop can be extremely noisy. Hearing loss could be a result if you are exposed to it for too long. Use a pair of high quality headphones or disposable earplugs. No matter the choice you make, make sure to wear them when machines are operating.

When establishing a woodworking space, make sure to understand how it will function. You want to create enough space that it is easy to move around the tools. You need a lot of space between your equipment. Consider space when you set up your shop. You’ll be more productive and the shop will be safer.

TIP! For many woodworkers, a table saw acts as the centerpiece of the workshop. In fact, this is really the ideal set-up for many reasons.

Look around your neighborhood and workplace for sources of free wood. Some businesses may have wood that they don’t want anymore and they’d be willing to just give it to you. You can also get a lot of good ideas online.

Make sure to follow directions step by step when woodworking. The instructions were likely designed well and tested out beforehand. Don’t take little shortcuts or skip steps, they are probably there for a good reason. These directions are made to help you make the best quality project.

TIP! When clamping pieces together, use a quarter-inch-thick bit of scrap between the piece and the clamp teeth. The clamp teeth can leave dents as the clamp is tightened.

You need to have good lighting where you plan to work. Woodworking requires a degree of accuracy. Many of the necessary tools required to make beautiful pieces are very sharp. That means you need to see what you are doing clearly to avoid mistakes and injuries.

Make a pilot hole before driving your nail into the wood. Get a bit which is smaller than any nail you plan to use, drill the hole and put the nail in. Tap gently on the nail and then use the right amount of force to hammer it home.

TIP! When you want to use a screw into wood, first a pilot hole should be drilled. A lack of hole could cause the screw to damage the wood.

Search at estate sales, garage sales or even online if you wish to get a good deal on equipment that you need for woodworking. You can get good prices on quality tools when you purchase them used. This will save valuable cash, especially if you are new to the hobby or are needing to quickly replace a broken tool.

You know just how beautiful dovetail joints are, but remember that if they’re hidden, they’re rarely worth the effort. However, not every piece looks good with visible dovetail joints. Other choices may suit the project better, so consider all options before you start.


When planning projects, be sure to determine the best wood for it. Avoid using soft woods like pine to make a table top; it is going to easily scratch. Remember that different woods turn different colors when finished.


Now you know how much woodworking as an art has to offer you. You can even make some extra money if you so desire. The tips and techniques located above will help you learn the skills necessary to become a great woodworker.

Business meets nature