When using stain, try a test on a small scrap you may have available or in an area on the wood that will be out of sight. This will help you avoid any surprises if the stain color looks different after it has been applied. This will go a long way in preventing disappointment.

TIP! Do you know how to find the best height for your workbench? To determine the right height, measure between the floor and the middle of your own waist. This is the best height for a workbench.

Woodworking has always been a prized skill which has always been in demand. This is a craft that is always in high demand. These tips will help you to learn about working with wood.

Have a good grasp of your budget before you start on any project. You don’t want to start on a project and then realize you don’t have the money to finish. You might just run the risk of having the enthusiasm for a project, but not enough money once you’re halfway done. Do your homework before starting to avoid surprises.

TIP! Avoid using your fingers as guides while cutting narrow pieces of wood. What you should do instead is use a thin, long strip of wood that will help you push the wood through.

Be safety conscious when working with wood. Be certain you always have the right safety equipment, and use your tools properly. Avoid taking off the guards on power tools; they are meant to protect you. If you end up hurt, you won’t be able to work at all.

Stair gauges are a crucial part of any woodworking shop. They are most often used to layout stair jacks, but you can use them to clamp your carpenter’s square. Doing so converts the carpenter’s square to a tool that can be used with a circular saw. When you use the square, every cut will be perfect.

TIP! Before using wood, make sure you have a good grasp of all the different types of woods that are out there. All wood is different.

When working with stains, dab a small amount in a test area to see how it comes out. Testing first will give you an idea of how the stain will look on a real piece. You’ll get no unwelcome surprises later. Wood and stains can surprise you, so test things out before you put it on the final project.

Buy nails in the right size and of the right material for each job. A nail that is too large in diameter will often split the wood, causing it not to hold properly. In addition, if you pick up something that is too little, it won’t be big enough to do the job correctly. You should always choose the right size nail for the project you are working on.

TIP! Are you working with a screw in a space that is insufficient for your screwdriver and your hand to fit simultaneously or comfortably? Look to your toolbox. Use a screwdriver with a long handle and 12 points.

Know how much you can spend in order to create a project. It is easy for your eyes to be larger than your wallet. It’s easy to get so excited to make something and then not have the money to complete the project. Do the math before you start, and you can avoid an unpleasant surprise.

You need to have good lighting where you plan to work. You need to be very accurate when measuring. You are going to be using tools that are sharp enough to cut through your hand. The things that are required in woodworking require adequate lighting so that you can see what you are doing and avoid injuries.

TIP! Be very careful when working with a table saw. While crosscutting, it is important that you use a block properly secured on the fence when establishing the cut length.

Make sure you use the right kind of wood appropriate for the task at hand. Different types of wood handle stress in differing degrees. If you don’t know what the limitations and strengths are for each wood species, look them up online or at the library. The more you know, the better.

If you are just starting out in woodworking, consider using kits. You can find kits that come with some pre-cut pieces. You can then assemble the pieces to create your project. This is an ideal way to introduce yourself to the joys of woodworking. By first practicing with these pre-cut pieces of wood, you’ll have a better idea how to cut yours in the future. This will save you a lot of time and money.

TIP! Make your own sanding block. Although sanding blocks provide you with more control and are easier to handle, you shouldn’t purchase expensive sandpaper holders.

It’s crucial that you never try to use fingers or hands as a guide when cutting wood. Rather, make use of a strip of wood that is long and thin to push your current piece entirely through the saw. This will help you keep your fingers, which you need to be a great woodworker.

Wet your lumber before beginning to sand. This helps raise the wood grain. This, in turn, lets you eliminate very fine scratches. This will provide your final project with a professional look. Additionally, it will save you work down the road.

Grade Indicates

Television can be a surprisingly good resource. Watch a few woodworking programs on TV. They can teach you useful information and give you project ideas. If you’re not sure where to find shows like this you should check the TV guide.

TIP! You can make reusable sanding blocks. Just cut a piece of wood into the size you require.

Get a handle on how a wood takes to staining prior to choosing a wood for a project. Paint grade indicates that the wood is not of high quality, while stain grade indicates that the wood has a grain pattern that is suitable for staining wood. Along the same lines, veneer is very different from particleboard because the former will not necessarily absorb stain properly; however, the latter typically absorbs too much stain. Choosing the correct piece of wood helps turn the project you work into something special.

Get the wood prepared for staining. Apply a pre-stain conditioner that is appropriate for the type of wood you are working with. This sort of wood conditioner is designed to soak into the grain of the wood and make a good surface for even absorption of the stain. Lastly, after your stain is on, use a rag to remove excess product.

TIP! Save your scrap wood because it may come in handy in other projects. You might need it to fill a gap or to soften clamps.

Before beginning to cut any wood, ensure your blade is sharp and in good working order. A blade that’s dull will make it very hard to use your saw correctly. On a non-power saw, a dull blade can make exact cuts hard to pull off. This can cost money if the piece is cut too short.

Always have a sharp blade when you’re working with skill saws or table saws. Dull blades are a major cause of woodworking accidents. Kick backs happen when your blade is dull. This kickback has been the cause of many workshop accidents. Ensure drill bits are sharp for effective driving.

TIP! Know that a fly cutter can be very dangerous. Use bright colored paint to paint the tips and make them easier to see and increase the level of safety when using it.

Use the right-sized nail for the project. A nail that is too large in diameter will often split the wood, causing it not to hold properly. Nails that are too small won’t hold the pieces together. It is important that you find properly sized nails in order to have a successful project.

Think about recreating some of your past projects. If you can do it better this time, why not? Even if your project was personal, remember that doing it again in the future could help you eventually earn money doing it for others. That can really motivate you and improve your craft!

TIP! Make sure that you maximize usage of drawers. You will be able to fit lots of different tools into a space if you know how to use your drawers efficiently.

Remember to protect your ears. Machines can be noisy and damage your hearing. Exposing your ears to these things for a long time can cause hearing loss. Get a pair of inexpensive ear plugs, or buy a great pair of noise canceling headphones. Use them anytime you are using the machinery.

It should be obvious that you would never drink or take drugs while working on projects. Having a beer or two may seem like the thing to do at the time, but it can cause you some painful mistakes. Many prescription medications and ones found at the drugstore can have a negative effect, as well. Do not ever take a mind-altering substance while you are working with wood.

TIP! The PBS television station often airs programming that is geared toward woodworking projects. These shows cover many skills and tools that are used in woodworking.

Safety comes first when using a table saw. When you crosscut, make sure the cut’s length is set with a block that’s clamped on your fence. This will prevent any movement from your board when you are cutting. Clamps leave the end of the board free to cut.

When woodworking, never rush through the steps of a project. Carefully study them. It’s best to know them inside and out before beginning. Begin with one step at a time in order to get off on the right foot.


It’s no shock to learn woodworking is a hobby and skill that has lasted for many years. There has been and will be the need for this craft and for people that do it. From novices to pros, the tips below will be priceless.

Business meets nature