When doing any woodworking project, safety is a big concern. Always use your tools in the way they were intended to be used and wear safety equipment at all times. Always keep the tool guards on, since they are there to keep you safe. These simple things can help protect you from accidents.

TIP! If you are going to be staining your woodworking project, use a pre-stain conditioner on the wood. A pre-stain conditioner helps keep away any irregularities or blotches in the wood.

If you work well with your hands, try woodworking out. Woodworking is something that has been going on for most of history. People still enjoy the look of beautiful wooden pieces, and these tips can help boost your skills.

You can make your own reusable sanding blocks. Use a scrap of 3/4″ plywood to cut six blocks, one for each sandpaper grit you need. Be certain they measure 2.5 inches across by 4.75 inches long. Put adhesive spray on the blocks and your cork tile square. Stick a block to the cork, making sure to cut the cork flush with a utility knife. Put adhesive on the sandpaper sheet and then apply it to the cork blocks face down. Finally, cut your sandpaper flush with your cork, and then label each of your blocks.

TIP! If you’re looking to rent a tool you’ve never used before, ask for a tutorial before you leave the shop. There are usually specialists available to get you comfortable using the tool more quickly than learning it by yourself.

Are you aware that your workbench height is important to your work quality? Your work bench’s perfect height can be found by measuring how far it is between the floor and your waist’s midline. This will be the optimum height for your ideal workbench.

Use tin snips to trim laminate for your projects. Tin snips are going to let you cut your laminate quickly and without much effort so that you can use it. Buying tin snaps is a ideal when cutting laminate and it also keeps it sharp.

TIP! A dry fitting is important to do before adding glue to your wood. Adjusting your wood after applying glue can cause damage to your project.

Select the appropriate kind of wood for your projects. When thinking of work with wood, there are some pieces of wood that aren’t able to handle the stress other woods can. If you aren’t positive of what type of wood to use, you should first gain an understanding of them.

It is often helpful to increase the spring in your grip. You may sometimes want to use spring clamps, but this can restrict the freedom of your hands. It can be tough to open such clamps with a single hand. There are ways to make this easier. It’s a good idea to get all of your clamps assembled on a piece of scrap wood before beginning a glue-up project. Because the clamps will already be open, this will allow you to easier grab and use one with only one hand.

Tin Snips

Wear footwear that’s sturdy when doing woodworking projects. This is necessary since your work area may be full of wood chips, nails and all types of tools. You want to make sure you’re preventing your feet from injury. The shoes you wear must be sturdy so as to protect your feet from injury in your work environment.

TIP! Don’t always rely on your tape measures. You may find a story stick useful, and you have the option of gradually working toward making a cut.

Tin snips are a great way to trim laminate that you use in woodworking. Tin snips are a great way to cut or trim the laminate into the size you want. Getting a set of tin snips you’ll only use for laminate will keep your snips sharp.

Your work area must be well lit. Accurate measurements are essential when woodworking. Also, sharp tools are involved in this craft. That means you need to see what you are doing clearly to avoid mistakes and injuries.

TIP! Plan your wood pieces on paper before you get started. Writing down your budget and blueprint allows you to control the process.

If the hinges to your interior door are loose, use a golf tee to fix the problem. Remove hinges and door from door frame and lightly tap one golf tee inside each of the screw holes. Cut off the excess golf tee and then reinstall the door. The tee will provide the screw with something that it can bite into.

Create a realistic budget. You will want to determine the cost of the wood, tools and stains or paints that you may want to use. What do you need? What will it cost? You do not want any surprises once you begin work, as it can lead to having to wait or completely give up on a prized project.

TIP! Research plans online to get new ideas. You don’t have to duplicate what they did, but you can get a pretty good jumping off point.

Be certain you use the right nail size for any project. A large nail can split wood, leaving it loose. Alternatively, nails that are tool small fail to hold the joint. It is important to choose the right nail for the job.

Wear tight clothes when you work with tools. This can cause an accident. Instead, opt for a fitted shirt, and keep the shirt tucked into your jeans. Steel toed boots can also protect your feet if you drop something.

TIP! When you use a fly cutter for a project, know that it is dangerous. Paint the tips of the fly cutter with fluorescent paint.

Put some more spring in your grip. You might need to use spring clamps, but you may only have one free hand. It can be tough to open such clamps with a single hand. There is a method for making things a bit simpler. Take all the clamps you’ll need and put them on a piece of wood or something within reach. In this way, you will be able to retrieve them with one hand as you need them.

Rental tools might be a great option for you. This will help you decide whether a tool is really needed or if you can handle using it. You can also ask the person or company who owns the tool to show you how to use it.

TIP! Get the dust cleaned up in your woodworking shop on a regular basis. Hardwood dust is typically more of a health concern than softwood dust, but this isn’t a hard and fast rule.

Look for free wood sources. Businesses will have leftover pallets, and construction areas may have scrap wood they don’t need. Before you dismantle the pallets, look at examples online of upcycled furniture and out-buildings for some ideas on how they can be used.

Invest in a Shop Vac to help you clean up after your work day. There are great for vacuuming up dust and small wood chips. Use a heavy duty dust brush and pan to brush debris off of your power tools. Then, use the Shop Vac to get anything that is left behind or on the floor so that your space is free from a mess.

TIP! When you use a clamp on your wood, use a quarter inch scrap piece between the wood and the teeth of the clamp. The clamp’s teeth may leave dents when tightening it.

Look around online, at garage sales, estate sales and yard sales for deal on your tools and other woodworking equipment. You can find a great deal on top of the line tools and equipment when you buy used. This is a great way for people to get started with woodworking or to replace tools that have worn out.

While many people feel they can handle many things while they’ve been drinking alcohol or taken a drug, don’t do that with woodworking. Cold beers may sound like a nice accompaniment to your hobby, but having them may lead to injury. This applies for medications (including ones that are over-the-counter). Do not ever take a mind-altering substance while you are working with wood.

TIP! Always create a pilot hole before attempting to bang a nail into a piece of wood. Using a drill bit that is a bit smaller than the size nail you plan to use, put the nail inside.

Do not forget the important of keeping in touch with the world. It’s easy to get lost in your space and lose track of others. Still, you may get stuck on some tricky projects. Another woodworker could give you the answers that you need. Someone, somewhere else in the world has certainly experienced your issue in the past.

Always remember the origins of your wood. A piece of lumber began as a majestic tree and should be treated as such. Make your cuts as efficiently as you can so that you avoid wasting materials and time.

TIP! Take a look at your local PBS TV channel. They often have woodworking shows on that could help you learn.

Incorporate your woodworking skills in yard projects. You can build a deck and a bird feeder. The birds will help keep insects away from your yard. If you are a professional craftsman, offer to meet clients at your home or shop to show off your work.

There is much more to a woodworking project than techniques and tools. Remember to work toward the end result. Always remember the elegance of simplicity, and your project can be astounding without complexity.


There is nothing like the pleasure of using your hands in woodworking. Now that you know more about woodworking, you’re ready to make your own pieces out of wood. Use these tips to better your woodworking skills up to an expert level.

Business meets nature