Make your own reusable sanding blocks. Cut six blocks from any 3/4″ plywood you have, for each sandpaper grit you regularly use. They should be 2.5″ x 4.75″. You can secure the sandpaper better with an adhesive. Start by sticking a block to the cork before cutting the cork with a utility knife. Then, spray your sandpaper with adhesive and apply it to the cork. Finally, trim the sandpaper and label each block.

TIP! When using stain, try a test on a small scrap you may have available or in an area on the wood that will be out of sight. This will allow you not to have any surprises later if the stain’s color looks different when it is applied.

If you have thought about getting into the woodworking field, then the following article is just what you need. The tips here can help you master the craft. Read the following information to learn more about woodworking.

Did you know that the height of your workbench is vital to the quality of work you produce? To find the best height, measure the distance from the floor to your waistline. This is the best height for a workbench.

TIP! When creating your budget, never forget to add the each new tool that you will have to purchase. This is something often overlooked.

When you make your budget, remember to itemize tools that you have to buy. You may only think about the wood and overlook the tools themselves. If you don’t have a tool, you must keep this in mind.

Gel stains are the new big thing for staining furniture and other wood projects that need staining. Gel stains will stick better, while liquid stains can drip. Also, gel stains are thick and their pigment stays consistent.

Tin Snips

Choose the correct nails when starting a project. Very large nails typically cause the wood to split, which will prevent it from holding well. Nails that are too small won’t hold the pieces together. You must be able to determine the right size for the job.

TIP! Is there a screw that’s hard to reach, and you can’t get that screwdriver in? Your toolbox has the answer. Grab a screwdriver with a long handle and a 12-point socket.

Use tin snips to trim laminate for your projects. Tin snips make cutting the laminate to size easier and quicker. Your tin snips will stay sharp if you only use them to cut the laminate.

Protect your feet by wearing sturdy footwear while woodworking. Your workshop is full of things that can injure your feet. You want to protect your feet from getting injured if you accidentally step on a nail or kick something heavy. Your shoes need to be great for walking around as you work.

TIP! If you are just starting a project, make sure to read the plans many times. Understand the plans and makes sure they aren’t missing any steps or information.

A stair gauge is an essential item in every wood shop. They are typically used to put down stair jacks, although they can function as a clamp for a carpenter’s square. This will turn your square in to a circular saw guide. When you use this square, you’ll cut perfectly straight every time.

In order to find great deals on woodworking tools and equipment, there are many places you can search, including yard sales, estate sales, garage sales, and even online. This is a great way to find good deals. You will end up saving lots of money which can then be applied to your woodworking projects.

TIP! Always be on the lookout for people that are tying to sell a home. Learning woodworking may give you the skills to increase the value of that home at the time of resale.

Be sure your blade sharp prior to trying to cut. Dull blades can make it hard to do as much sawing as you want. It also leads to errors that cost you money, time and materials.

If you are just starting out in woodworking, consider using kits. These kits contain pre-cut wood to ensure your project is a success. This is a great way for a beginner to get a grasp of what goes into woodworking. In the long run, it should save you money because you can learn without messing up costly supplies.

TIP! There are some important power tools that are needed before starting woodworking projects. If you don’t own them already, you will want to get a circular saw, small table saw, jigsaw, a drill or driver and a power sander.

Look around at yard and estate sales for woodworking tools and equipment. You can get good prices on quality tools when you purchase them used. You can then apply those savings to other things you may need.

Make sure your wood is prepared to actually absorb your stain. This can be accomplished when you apply a wood conditioner. The conditioner will make it so the wood soaks up the stain evenly. After the stain is applied, use an old rag to remove excess stain.

TIP! IN the planning stage of large projects, you should think about possible changes you will want to make in the future. An example of this is when in the future you might need to put in electricity to a project.

Network with your peers. Your woodworking area is probably your private space and lacks Internet access. There will be moments when you have a tough time with a project. Another woodworker could give you the answers that you need. You will probably never have a problem somebody else hasn’t already had.

Watching is usually the best way you can learn woodworking. There are lots of online videos to see how to use all kinds of tools. The video shows the project in detail from start to finish.

TIP! The fly cutter is a very dangerous tool. To make sure that you can see the arm and bit, dab fluorescent paint on the tips.

You can’t tell when something will get into your eyes. Protect your eyes by wearing goggles. If your goggles do not deliver clear vision or fit well, buy a replacement pair.

When chiseling, your movements should be away from the body. The chisel can easily slip. If you are chiseling towards yourself, you can cut yourself badly. The same thing can happen when you work with a saw. You should always use a motion that directs the saw away from your body.

TIP! Woodworking shops use many different varieties of saws. You’ll find circular saws (short cuts), miter saws (for angles), and table saws (for straight cuts that are long).

When you are sanding, do not apply a lot of pressure. Using pressure while sanding can make the surface uneven. If you use the right kind of sandpaper with the right grit, then force won’t need to be applied a lot. Also, try to use a circular motion to create a smooth texture.

Use drawers wisely. If you efficiently use drawer space, it is possible to fit many tools in a small area or room. In addition, sort your tools by type. This technique will help you quickly find the appropriate tool. Store and organize your tools in a logical fashion.

TIP! Do not drink or do any drugs when you are working on a project. It may sound like a great idea, but you could have an accident.

Make sure you have lots of lights in your shop space. Bright light is necessary when working with wood. This will help a lot with sanding, as well. Also, additional lighting means you can make sure that you apply stains evenly.

Drill pilot holes prior to screwing into wood. If you don’t already have the hole in place, the screw will spin out of control and destroy the wood. If you do not have a drill, use a hammer to gently tap the screw and start a hole.

TIP! Have a large clamp for working on gluing large wood pieces together is an essential. A pipe clamp will be a great help.

Use only one extension cord when woodworking. When not using a tool, unplug it. Then, plug in the tool you are going to use. This can keep you from tripping and also from getting electrocuted.

Painter’s tape is a very important tool for your woodworking arsenal. When cutting along a line made with this tape, you can stay straight and reduce splintering too. Painter’s tape also prevents glue from settling into wood.


Television can be a surprisingly good resource. Watch a few woodworking programs on TV. They can teach you useful information and give you project ideas. Check your local listings to find out when they are on.


Try making your own sanding blocks. Start by cutting the wood in the shape and size that you would like. Affix the sandpaper with adhesive and let the block dry. This will give you a great sanding block to use.


You need to prepare wood before staining. A good way to do this by using a pre-stain conditioner for wood. The conditioning ingredients go deep into the grain of the wood and allow the wood to more evenly disperse the color of the stain used. Once a stain is applied, use an old rag to gently remove any extra stain from the wood.


As you noted in the introduction, woodworking is an immense body of knowledge that always has something new you can learn. Fortunately, the tips from this article will help you become a great woodworker. Begin exploring the wonderful world of woodworking.

Business meets nature