Make sure you use the right kind of wood appropriate for the task at hand. In woodworking, different types of wood handle have different levels of stress tolerance. If you don’t know how each wood type reacts to what you’re trying to do, spend a bit of time learning about it.

TIP! Gel stains are great for staining furniture pieces. Gel stains work better on the wood because they don’t run like the liquid stains do.

The skill of woodworking is always in demand. Regardless of skill level or interest, there is a project that is just calling your name. The following advice will help you better your woodworking skills.

Never use your fingers like a guide. Use a piece of thin wood instead to help push along the piece. This will help you keep your fingers, which you need to be a great woodworker.

TIP! You need to do dry fittings prior to applying glue and clamping your woodworking project together. If you make adjustments after you have glued the pieces, you might damage something.

Account for new tools in your budget. It isn’t hard to overlook tools when you are concerned about the cost of wood and accessories for your project. Everything you need should go on your list, so that your budget is truly representative of your costs.

You want to be sure that you have the right size nails for your project. Nails that are too large can cause the wood to split. But if you use a nail too small, it may not have the strength or size to hold the pieces together. The right size nails are crucial for having a successful project.

TIP! Solid footwear is also advisable when you are woodworking. The environment in which you work will have many nails, sharp pieces of wood and heavy tools.

Don’t guide your saw with your fingers when cutting narrow pieces of wood. Using a piece of wood as a guide is much safer. This will assure you keep your fingers.

Check out Craigslist and estate sales to find great supplies. Many times you can find great deals on used power tools. This is a great way for people to get started with woodworking or to replace tools that have worn out.

TIP! Having a few beers while you build a few things may seems like an ideal way to spend your weekend. However, working with a saw and drinking is a terrible combination.

Each shop needs a stair gauge. These are usually used for laying out stair jacks; however, you can also use it to clamp down your carpenter’s square. This can make a carpenter’s square serve as a guide for a circular saw. When you use the square, every cut will be perfect.

Keep in touch. Most woodworking shops do not have access to the Internet. Still, you are going to get stumped or stuck on particular projects. Look for other woodworkers and ask them questions. It’s likely there are others with your question too.

TIP! Use some kits for woodworking when you first get started in it. Such kits include already-cut wood pieces that fit to make a project.

Learn the characteristics of different kinds of wood. Each type is different. Staining looks different on various types of wood. Also cuts that are different will have splintering effects that are different. You will also notice many variations in grains. Each of these things plays a role in how your project eventually turns out.

There always comes a time that something will fly into your eye when you least expect it. Keep your eyes on the machine that you are working with at all times. If they do not fit that well or give clear eyesight, get a pair that do.

Golf Tee

Do not use too many extension cords. Take the extra time to plug and unplug tools you’re using. This will keep you safe from tripping.

TIP! Creating sanding blocks of custom sizes is a breeze. Just cut down a piece of wood to the dimensions your current job requires.

You can use a golf tee to help tighten up the hinges of an interior door. Put the golf tee in the screw hole to prevent wiggling. Cut the excess, then put the door back on. The screw will be able to then hold on to the golf tee in order to function properly.

Be sure to make a reasonable budget for woodworking. Once you get a project picked out, remember to figure out what it’s going to cost you. Calculate what things you need and the costs. It’s not fun if you have to abandon your project in the middle because the costs made it so you couldn’t afford to continue.

TIP! Hang onto wood scraps, as they may be useful down the road. You can never tell when you’ll need a bit of wood for filling a gap or something else.

Before doing any saw work, make sure the blades of the saw are good and sharp. A dull blade will make you work too hard. A dull blade will also cause you to make mistakes and harm the wood that you’re working with.

Skills saws and table saws should always have sharp blades. A lot of accidents in woodworking are because blades are too dull. Dull blades seriously increase the chances of wood kicking back. The kickback thus results in accidental injury. For best results, the drill bits should be razor sharp.

TIP! Think of how you work when you set up your woodworking shop. Do not stuff the area with so much equipment that there is no freedom of movement.

Be sure to wear solid, closed-toed shoes when pursuing woodworking projects. Your work environment will be full of nails, wood pieces and various types of tools. Your feet deserve protection from the inevitable stepping on a nail as well as you accidentally kicking or dropping something heavy. The shoes must be tough enough to endure your work environment.

If you are serious about woodworking, then you should create a shop that is properly organized and ventilated. When you do these things, it will help to alleviate dangerous accidents. Good lighting and a fire extinguisher are always smart additions to a shop, too.

TIP! Drill a pilot hole before driving a nail down into the wood. Get a bit which is smaller than any nail you plan to use, drill the hole and put the nail in.

Avoid being a perfectionist with tape measures. You can work into a cut by using a story stick. Cutting a scrap piece of wood is a great idea, allowing you to try out your fitting. Planning out your cuts in different ways keeps your mind working.

Drill the pilot hole before you screw into wood. If you don’t drill a pilot hole first, your screw may spin, thus causing damage to the wood. If there is no drill available, then lightly tap the screw to come up with a hole.

TIP! Know where your wood comes from. Keep in mind that wood comes from trees, which are a part of nature.

Always talk with other woodworkers. Your woodworking shop likely is your personal space and doesn’t have Internet. There will be times, though, that you need help in the middle of a project. You can talk to others for help and advice. You’ll have little to no problems because people have probably already have written something about it.

You do not necessarily have to purchase a lot of expensive tools if you are just getting started. You are able to rent them from a lot of home improvement stores. If you find that you enjoy woodworking, you can begin purchasing power tools over time. If you are looking at this as a single project, then renting may be the better choice.

TIP! Large pieces require large clamps. Think about getting a pipe clamp.

Do you know someone who is selling a house? You can make some money with your woodworking abilities. You can make a post for the mailbox or take on an entire kitchen rehab.

One of the tools many people forget to keep in their workshop, but is very important, is painter’s tape. Use it to cut straight lines so that the wood doesn’t splinter. You can use to to keep glue off the wood.


You should have a few essential tools before you start working with wood. A hammer is a good first tool. A claw hammer is best. Make sure it feels right and good in your hand. Avoid purchasing a hammer that’s too heavy.


It really shouldn’t come as a shock that woodworking has been a popular hobby and skill for quite some time and will continue to be for quite some time. There has always been a need for people who are gifted with the skill of woodworking. Whether a professional or just a hobbyist, you should have gained something from reading this article.

Business meets nature