Anytime you are working around power tools, there is an element of danger; focus on safety at all times. Be sure to follow all safety directions when using power tools. Guards on power tools are provided for your protection so leave them alone. Hospitalization is not the goal of woodworking.

TIP! Always apply a pre-stain conditioner to the wood you want to stain. If you use pre-stain conditioners on your project, you’re going to be not as likely to have irregularities on the project when you’re done.

Woodworking is a valuable skill that has long been revered. There are many techniques to learn when it comes to woodworking. The following article will help you get better at woodworking.

Create sanding blocks you can reuse. Begin by using scrap plywood to cut six blocks for each type of sandpaper grit. They should be about 4.75″ x 2.5″. Spray adhesive on the wood and a piece of cork. Stick a single block onto the cork and make sure you’re cutting the cork in a flush way using your utility knife. Spray adhesive on a piece of sandpaper and stick that to both cork blocks face down. You can make smaller blocks if you wish as well. These can be used for smaller pieces demanding finer sanding.

TIP! Pick out the right kind of wood. Different types of wood can handle different levels of stresses.

Safety is of utmost concern when you are doing any time of woodworking project. Always purchase the necessary safety equipment to avoid injury. Guards on power tools are provided for your protection so leave them alone. You don’t want to start in your workshop and end in a hospital bed.

Use your tin snips to make quick work of trimming wood laminate. You can cut effortlessly and quickly with tin snips. Try designating a pair of snips for laminate cutting so that they stay sharp.

TIP! A stair gauge is a great tool to keep in your shop. They are typically used for laying out stair jacks, but can also prove useful for clamping a carpenters square.

You should always test stain on a small area or on a wood scrap. Then, you can stay away from any surprises if the stain looks differently after application. This simple testing tactic lets you counter the unpredictability of wood.

Make sure to purchase and wear proper ear protection. A wood shop can be extremely noisy. Exposing your ears to these things for a long time can cause hearing loss. You can get headphones or use ear plugs that are disposable. Whatever you select, make sure that they are available when you plan on operating the machines.

Carpenter Square

Keep in contact with others who enjoy woodworking. Where you work is your own space and not likely to have internet. Still, there may be times when you have a question or may be stumped on certain projects. Consult with fellow woodworkers to get new ideas and useful support. You are always likely to find a solution to a problem that you are dealing with.

TIP! Your skill in woodworking can help you turn your backyard into a small paradise. Build a deck or a bird feeder.

Try using a stair gauge as a crosscut guide. To use, clamp the gauges to a carpenter square. Then put a mark on the notches. If you place them on the tongue you’re using for your carpenter square, that combo is a good crosscut guide for your circular saw.

If you know people that are selling their home, take advantage of the opportunity. The skills you have working with wood can help to increase property value. You can make a post for the mailbox or take on an entire kitchen rehab.

TIP! There are a couple tools you need to have when you start doing a project. You need a jigsaw, a circular saw, a power sander, a small table saw, and an adequate drill or driver.

Be sure you understand what is possible under your budget. It is easy to miscalculate costs when it comes to woodworking projects. You may be excited to create start a new project, only to be disappointed half way to completion when you run out of funds. Do your homework before you start to avoid surprises.

When planning for a large project, consider the future. If you are building a backyard woodshed, for instance, keep in mind you may want to add electricity later. If this is the case, make sure that you leave enough room to wire it for electricity and plan for places to install lights.

TIP! Avoid buying too many supplies. You have to store what you buy, and you may not have that much room.

Use tin snips to cut laminate that you are using for your projects. They will make it easy for you to cut quickly and easily and get the laminate to a size that is usable. Using them only for this laminate also helps keep them sharp.

If you are often stopping to check measurements when you are using a circular saw, write the measurements right on the shoe of the saw. Do this on both sides. If you can’t read your markings, use an address label.

Golf Tee

When gluing together pieces of wood, choose a good clamp to help. That will make sure the pieces stay in the right place as they dry. There are many sizes and shapes for clamps, so make sure to select the best one for your job. And know that more than one may be needed.

TIP! If you want to set up your woodshop in a way that will work best, think carefully about how you will need to use the space. You can’t have tools for every project under the sun housed there! You should have a lot of room between machines.

A golf tee provides a quick and easy fix for loose interior door hinges. Remove hinges and door from door frame and lightly tap one golf tee inside each of the screw holes. Then, cut the golf tee’s excess off and reinstall the door. The golf tee fills the hole and provides additional material to hold the screw.

Keep the dust in your workshop cleaned up as much as possible. Generally hardwood dust is going to be a hazard more than the dust from softer woods, but that isn’t always the case. It is possible to experience allergies and irritation even with limited exposure to softwood dust. Make sure to keep the skin, eyes and nose protected.

Look for free wood sources. Often business will grant you permission to haul off unwanted pallets. Look online and find ideas for using them.

Do not rush your plans when working on your project. Carefully study them. You really should know them backwards and forwards before you even begin. When you do get going, go through your plans step by individual step, so that you get things right the very first time. You get to avoid making mistakes in being careful and mindful of the full process.

TIP! While dovetail joints are beautiful, they aren’t worth creating if they won’t be seen. This being said, not everything is going to look great even if these joints can be seen.

In order to find great deals on woodworking tools and equipment, there are many places you can search, including yard sales, estate sales, garage sales, and even online. You’ll be able to find great deals and tools that professionals use for cheap if you buy things used. You will save a lot of cash when you buy new tools buy looking for used tools first.

When you’re thinking of working on a project, there will be more to think about than techniques or tools. The end look of your woodworking creation is what you should look forward to. Always remember the elegance of simplicity, and your project can be astounding without complexity.

TIP! You need some large clamps to let glue set on a large piece. You might think about purchasing a pipe clamp.

Always pay attention to safety when using a table saw. While crosscutting, it is important that you use a block properly secured on the fence when establishing the cut length. This is better than just using the fence itself, as it keeps the board from springing back. Clamps leave the end of the board free to cut.

An important and often overlooked tool is painter’s tape. When cutting along this tape, you can see a straight line and reduce splinters. It’s great for protecting wood from overflowing glue, as well.


If you have friends or family that are selling their home, then you can do odd jobs to spruce it up to help it sell faster. You can use improved woodworking skills for hobbies, additional income or even boosting resale value of a home. From creating new cabinets to building a shed, your value is great.


It really shouldn’t come as a shock that woodworking has been a popular hobby and skill for quite some time and will continue to be for quite some time. Wood is prevalent and it’s natural beauty is a good fit for man. Whether you are seriously addicted to woodworking or you just dabble from time to time, you can use what you have just read to get better at it.

Business meets nature