Anytime you are working around power tools, there is an element of danger; focus on safety at all times. Be sure to follow all safety directions when using power tools. Don’t take guards off the power tools. It wouldn’t be good if you began working on your woodworking project and you got hurt.

TIP! Try using a stair gauge as a crosscut guide. Fix them onto the carpenter’s square, taking care to note that they are a good fit for the stair jack.

If you’re just starting out with woodworking, this article is perfect for you. There are quite a few different tips that you can see in the article below that will allow you to begin with this hobby or job. You will find out more if you keep on reading.

Your woodworking shop needs a stair gauge. They are used most often for laying out stair jacks, but they can also be used to clamp carpenter squares. This adds a very practical element to your project that can save time and money. If you use the square as a guide, your cuts will be straight every time.

TIP! If your door hinges are loose, you can use a golf tee to fix them. Take the door from the frame than then tap in the tee into the screw holes.

When doing any woodworking project, safety is a big concern. Proper tool use and safety equipment are important when you are woodworking. Never remove any guards off of your power tools that are there to protect you. It wouldn’t be good if you began working on your woodworking project and you got hurt.

Before doing any saw work, make sure the blades of the saw are good and sharp. A dull blade will not be able to saw the way you need. It also leads to errors that cost you money, time and materials.

TIP! Always look for free wood around your neighborhood. Many businesses often have pallets they no longer want, and may let you have them if you have a vehicle to haul them off with.

It is always a good idea to have a pre-stain conditioner for the wood you’re planning to stain. The conditioner will make it more difficult to notice irregularities in the wood. Also, it will create a smooth texture upon completion.

Solid footwear is also advisable when you are woodworking. Your workshop is full of things that can injure your feet. You want to ensure that you have the proper protection, as you may tread on a nail or another sharp object. Use strong shoes intended for the workplace to protect your feet.

TIP! When you first start out in woodworking, a good tip is to go over the plans before you begin. Make sure they are complete without any missing information.

Never use your fingers when guiding the cut of a slim piece of wood. Use a piece of thin wood instead to help push along the piece. This will help ensure you keep all of your fingers, making woodworking much easier.

You cannot anticipate when a foreign object may fly into your eye. Wear your goggles to keep your eyesight safe! Invest in a pair of eye goggles that fit well and provide clear vision.

TIP! There are some tools that you must have on hand. The first tool you get is going to be a hammer.

Add a stair gauge to the shop that you create. This is used for laying out stair jacks and can also be used to clamp a carpenter’s square. That makes the carpenter square a guide for the circular saw. You can always make perfectly straight cuts by using this method.

Make your own reusable sanding blocks. Sanding blocks make sanding easier, gives you more control and you can make your own. You can use a piece of plywood for your sanding block. Use spray glue and apply the sandpaper.

TIP! You can use a stair gauge to guide circular saws. If it’s necessary to match up the run and the rise of stair jacks, a stair guage is typically used.

Many people have a small ruler on them when working in the shop. Sometimes it will fall out of your pocket when you move around. Get a metal one and keep it in the pocket that has the little telescoping magnet for picking up loose screws. The magnet will ensure the ruler stays in your pocket.

Don’t create a type of extension cord octopus when woodworking. Only use one extension cord. Take a moment to swap out the tool you were using for the tool you plan on using. This will make you less likely to trip over a bunch of cords.

Golf Tee

Avoid buying too many supplies. Buying in bulk can save you money if you are buying materials you need, but is a waste of money when you buy stuff you won’t actually use. You should only be buying what you are going to use today or really soon.

TIP! One of the best ways to learn how to work with wood is to watch it being done. Many videos are available online which can teach you how to use different tools.

If the hinges on your interior door have become loose, you can fix it with a simple golf tee. Remove the the door and the hinges from the door frame and gently tap a golf tee into each screw hole. If there is excess golf tee, cut it off before reinstalling the hinges and door. This gives the screw a more solid base to grip into.

Fly cutters can be dangerous. To be able to visualize the arm and bit more easily, allowing you to avoid touching them, paint them with paint of a fluorescent color. This way they are easier to see and stay clear of, making the work much safer.

TIP! If woodworking is new to you, it is unnecessary to purchase each and every tool. Instead, look into groups such as Freecycle, and ask family and friends if they have tools around that they no longer use.

Add some extra spring to your grip. Using a spring clamp can come in very handy, but using them with one hand can be a challenge. These clamps can be difficult to open without the use of both hands. There is an easier way. Before starting to glue a large project, arrange all the clamps you will be using onto some scrap wood while both of your hands are free. This will help you to maximize your efficiency while cutting.

When you glue your pieces together, use a good clamp. A clamp will help to make sure that the pieces of wood adhere properly until the glue is dry. There are many different sizes for clamps so that you can get the perfect one for your project. Use the right number of clamps for the job.

TIP! Stick a nail in your shop wall, and hang a notebook or clipboard complete with paper and pen on it. This way you can have a list of the things that you are running short of.

Look around your neighborhood for some free wood. A lot of businesses will have wooden pallets they’re trying to get rid of, and you may be able to pick them up. Search online to find ideas on how to make furniture using pallets.

Whenever you’re clamping together portions of your project, use a 1/4 inch thick section of scrap lumber between the clamp’s teeth and the wood you are joining together. The teeth of the clamp often dent the wood when tightened. By inserting a piece of scrap between your piece and the clamp, you can avoid getting teeth marks.

TIP! Create a well ventilated and organized work shop for your woodworking projects and tools. You want to make sure that you keep a first aid kit and fire extinguisher handy at all times.

Try not to spend too much time using tape measures. Story sticks are good to use, and you can slowly work up to your cut. Scrap wood cutting is smart and means that you are able to try out a fitting. If you have a variety of cuts, you won’t get bored.

Always drill a small pilot hole before screwing into wood. The screw will not hold in place and it will end up spinning out of control which ends up harming the wood. Simply use a hammer to gently tap the screw to form a hole if you do not have a drill to complete this.

TIP! Try to remember the true source of your wood. It was once a part of a majestic tree that gave itself for someone to create something beautiful, so don’t ever take that piece of wood for granted.

If you are new to woodworking, one of the best things you can do is to read your plans before you start. Be sure you understand them so that you are not missing anything important. If you cannot understand them or something is missing, someone from a local home improvement center may be able to help you.

If you plan to build something large and want to clamp wood pieces together, a large clamp is necessary. If you haven’t got any, think about getting a pipe clamp. The hardware store just needs to cut the piece of pipe for you. Then after threading, it is ready to go.


As mentioned before, this article can teach you lots of things about woodworking to make you a great woodworker. Luckily, this article offers you great ideas to achieve exactly that. Now, you only have to continue your exploration and put to use what you have learned.

Business meets nature