Be safety conscious when working with wood. Always use your tools properly while wearing adequate safety equipment. Don’t take guards off a tool – they’re intended to keep you safe. The last thing you want to do is end up at the emergency room because of an accident.

TIP! You can make your own reusable sanding blocks. Use your scrap pieces of 3/4″ plywood and cut as many blocks as you need for the sandpaper grits you use the most.

Woodworking is a highly-desired skill that is always in demand. No matter who you are or what your skills are like, you can find a project which fits your needs. The following paragraphs are full of ideas you can use to be a better woodworker.

Test the stain before you apply it to the wood you are using in your project. This will help you to pick the right stain color for your project. Wood is unpredictable so you’ll want to test it first.

TIP! Your workbench’s height is more important than you realize. Measure the distance between the floor and your waist to learn the perfect height for your workbench.

Understand that safety should be your top concern with woodworking. Always use your tools in the way they were intended to be used and wear safety equipment at all times. Don’t ever remove the guards from your power tools; they are in place for your protection. Ending up in the emergency room is not a good way to end a woodworking project.

Have a good grasp of your budget before you start on any project. Many people are surprised at how much it costs to make some woodworking projects. Do not get excited about a project before making sure you have enough money to get everything you need. Do your homework in advance and select projects that you know you can finish.

TIP! Don’t guide your saw with your fingers when cutting narrow pieces of wood. Instead, push the pieces through your saw with a long strip of wood.

Always apply a pre-stain conditioner to the wood you want to stain. A good pre-stain condition helps to even out any imperfections in your project that a stain can accentuate. It will also help to improve the appearance of the wood itself, as wood has a natural grain and the conditioner fills it in to some degree.

It’s great to have a small ruler inside your pocket, but it might fall out if you have to bend. A great way to remedy this problem is to purchase a metal ruler, keep this in your pocket with a telescoping magnet that is used to gather up any loose screws. The magnet will keep them both firmly inside your pocket.

Workbench Height

Choose correctly-sized nails. Too large of a nail can split your wood, resulting in it not holding properly. However, very small nails do not penetrate the wood well; therefore, it won’t hold the wood properly. It is important that you find properly sized nails in order to have a successful project.

TIP! Make sure your grip has sufficient spring. You might need the extra spring when you already have your hands full.

Are you aware that your workbench height is essential for having successful woodworking projects? To find the perfect height of your workbench measure the distance between the midline of your waist and the floor. This is the perfect workbench height.

Wear good footwear as you work on your projects. Your work environment will be full of nails, wood pieces and various types of tools. It is important to always protect your feet. Injury can happen if you drop a heavy tool, kick something heavy, or step on a sharp object. You need to have shoes that are study enough to protect you when working in your woodworking shop.

TIP! Use the right type of wood for your project. Never use softer woods like pine for the tops of tables, as it tends to scratch.

Make sure you have a good idea of what your budget can really make. Your eyes can get bigger than the amount of money you want to spend very quickly when it comes to woodworking projects. Do not get excited about a project before making sure you have enough money to get everything you need. Write down the costs beforehand so you can see if it fits within your budget.

Patience is key. Some people get mad when their project doesn’t come together like they plan. Know that your finished pieces are inside the wood and that you just need to coax them out. If you’re patient, you’ll see that you can keep your focus on your work. Soon, your piece is going to be finished!

TIP! Some power tools are essential for woodworking projects. You need a jigsaw, a circular saw, a power sander, a small table saw, and an adequate drill or driver.

When doing woodworking with laminate, a good method of trimming the material is by using a pair of tin snips. These let you cut laminate into a size you can use. Using them only for this laminate also helps keep them sharp.

Any woodworking project needs to have a budget. Figure out what the materials are going to cost you. Calculate what things you need and the costs. Being forced to stop working on a project because it costs more than you thought is the result of poor planning.

TIP! Save the wood that you have for scrap because you may need it later on. You may need a piece of wood in order to fill a gap or clamp glued pieces together.

You should work in a well lit area. Woodworking is something that requires you to know how to measure accurately. Additionally, you are working around dangerous, sharp tools. These things require that your space be adequately lit for safety.

Buy tools that are high quality. Cheap tools break often and can leave you injured. Although more expensive, a tool that is made well should last many years if it is taken care of properly. So, in the end, you will be saving money by not having to buy new tools on a regular basis.

TIP! Always practice before getting started with a new project. Look through your scrap wood and find a similar size and type to the proposed project.

Having a few beers while you build a few things may seems like an ideal way to spend your weekend. This is not a good idea and can impair your judgement. Drinking alcohol can cause serious injuries when working with power tools. Illegal and prescription drugs should also be avoided when working with woods.

Fly cutters can be really dangerous. Paint the tips of the tool bit and arm of the cutter with neon paint to make them move visible and avoidable. You will be able to see them and avoid them better, and this will make your job safer.

TIP! Remember that your skills will get better in time. With every project you do, you will gain experience and confidence.

Be very careful when working with a table saw. When crosscutting, set the length by clamping a block onto the fence. Just using the fence can cause the board to spring back; however, clamping the board will prevent this. When you use a clamp, the end of the board is still available to be cut.

If you are only beginning to do woodworking, use cheap wood or even scrap wood. As a beginner, you will make mistakes and you don’t want it to cost you a fortune. You won’t want to waste your money to practice.

TIP! Create a woodworking shop that is cost efficient and practical. Do not buy too much equipment or you will be unable to move freely in your shop.

Your skill in woodworking can help you turn your backyard into a small paradise. Not only build yourself a nice deck, but also a bird feeder. You can sit back and watch the birds and come up with your next woodworking project. If professional woodworking is a thing you want to do, you should meet up with clients on the deck if you can so they can see what you’re able to do.

When you want to use a screw into wood, first a pilot hole should be drilled. If you don’t already have the hole in place, the screw will spin out of control and destroy the wood. If you do not have a drill, try lightly hammering the screw.

TIP! Dovetail joints are pointless if people can’t see them. In addition, these joints are best suited to certain projects.

Be on the lookout for people that want to sell their house. You may be able to increase the value of your house with your skills. It is possible to build new mailbox posts, refurbish cabinetry and perform all sorts of useful projects around the home.

When you’re thinking of working on a project, there will be more to think about than techniques or tools. You should always keep the final product in mind while working on your project. Keep it simple and don’t overdo it.


It is not surprising that woodworking hobbies and skills have withstood the tests of time. There has been and will be the need for this craft and for people that do it. Whether you’re a hobbyist or a serious woodworker, the tips above will help you get more out of it.

Business meets nature