If you need to stain a project you’re working on in woodworking, then you should use a stain conditioner first. If you use a pre-stain conditioner, you will be less likely to notice any blotches or irregularities in your finished project. Conditioners can smooth the uneven grain of your wood and cause the stain to penetrate the wood more evenly.

TIP! Stair gauges are very important devices for you to use. Match them to the rise and run of your stair jack, then attach them to the carpenter’s square.

If you’ve ever seen a beautiful chair or a carved statue, you may wonder if you have the chops for woodworking. This article was created to battle the lack of information available to new woodworkers. Use the tips here to boost your woodworking skills.

You should stir stains and finishes before using them. They should never be shaken. Stains often have ingredients that settle to the bottom. Shaking can cause bubbling which prevents the products from mixing properly. Make sure that the product is thoroughly stirred, and everything is evenly dispersed.

TIP! Select the proper wood for any project you do. Some woods are not as strong as others.

Safety always comes first. Wear safety equipment and always use tools the correct way. Never remove any guards off of your power tools that are there to protect you. You can’t complete the project if you end up hurting yourself.

Never use your own fingers as guidance when cutting narrow chunks of wood. Try using thin wood strips to push that piece through your saw. This technique helps protect your fingers from injury.

TIP! It is often helpful to increase the spring in your grip. You may only have one hand available when you need to use spring clamps.

You can use stair gauges to make crosscut guides. Just clamp them on your carpenter’s square while making sure they match up. Then you should mark all of the notches. Have the share one tongue of the carpenter square. This is a combination that will provide you and excellent crosscut guide for your circular saw.

Look all over the Internet, local garage and estate sales to find great deals on items you need for woodworking. By buying used, you can save yourself a lot of money. You can then apply those savings to other things you may need.

TIP! When you’re thinking of doing a woodworking project, you should be sure you’re using the right kind of wood for the job. Refrain from using a soft wood such as pine, as this can become scratched quite easily.

A stair gauge is a great tool to keep in your shop. Commonly used to scribe stair jacks, it can also be used to attach to your carpenter’s square. That way, it is possible to make a carpenters square into a circular saw guide. You won’t have to worry about uneven cuts any more!

Listen up for anyone you know personally that is wanting to sell a home. You can earn some extra money by using your skills to increase their house’s resale value. Your potential projects could range from simple mailbox posts to entire kitchen renovations.

TIP! Power tools are a must in a shop. If you lack them, get yourself a jigsaw, circular saw, power sander, drills, drivers and a table saw.

Understand a woods characteristics before you use stain on it. You’ll want to look for paint-grade or stain-grade woods, depending on your desires for the project. Also, particleboard and veneer will be a lot more different. Veneer isn’t going to absorb a lot of stain while your particleboard will absorb way too much. Choosing the right wood will ensure your woodworking project turns out its best.

You can create your own sanding blocks. Simply cut the wood to the size and shape you need for the job. Next, use some adhesive to attach your sandpaper to your block, and then let it dry. Now you have a new sanding block that is the ideal size for the wood project at hand.

TIP! Have a budget set aside for your woodworking. Find out how much materials will cost you.

Know the different characteristics of the woods that you’re using in your projects All wood is different. Different types of wood will respond to staining in different ways. Different cuts will have different effects on splintering. You will also see a wide range of different grains. Take these different characteristics in mind when planning a project.

Purchase tools that are made extremely well. Tools that are cheap can break and cause major frustrations. Expensive tools also have a greater longevity. It actually saves you money in the long run.

TIP! Try not to over purchase supplies, tools, or hardware. Buying too much means you will have excess things around that you have no use for.

What do you do when you need to tighten a screw that is hard to reach? Look to your toolbox. Grab a screwdriver with a long handle and a 12-point socket. Attach the socket first to your screwdriver and then to the appropriate ratchet.

Use the sharpest blades you can. Most accidents happen due to dull blades. Wood is much more likely to spring back if you are cutting with a dull blade. These kickbacks cause a lot of workshop accidents. In addition, make sure your have sharp drill bits to ensure best results.

TIP! A fly cutter can be dangerous. To make sure that you can see the arm and bit, dab fluorescent paint on the tips.

Don’t forget to keep in touch with others. Your woodworking area is probably your private space and lacks Internet access. You will still get perplexed over certain projects that you are working on. Talk to other woodworkers to get support, answers to your questions, and more ideas. Someone else likely had a similar problem in the past.

Write down your measurements to get them right every time. Do this on each side of your blade. If you can’t read this, then put a label onto the shoe so then you can write on it.

TIP! Think about renting tools instead of buying them. If you are considering buying a new tool, rent it a couple of times to see if you actually need it.

Safety comes first when using a table saw. When crosscutting, set the length by clamping a block onto the fence. This is safer and prevents board movement. Using this clamping method will allow the board end to still be cut.

Using small quarter inch thick slices of wood when clamping will keep the clamp marks off of your project. The teeth in the clamp will leave a dent in your project when tightening the clamp. So use a thin sliver of wood to keep those teeth marks from happening in the first place.

TIP! Create a pilot hole before screwing into wood. If you try to get the screw to bite in without a hole in place, you’ll find it just spins out of control, destroying the wood.

Use woodworking kits when you’re just getting started. The wood is already cut for you. When you are trying to grasp the fundamentals of woodworking, this is a fantastic way for you to get started. This will also save money down the line because you will be learning how to avoid costly mistakes.

Know where your wood comes from. It was once a part of a majestic tree that gave itself for someone to create something beautiful, so don’t ever take that piece of wood for granted. Don’t waste any wood by remaining efficient and cutting pieces of the appropriate size.

Drafting Square

There is much more to a woodworking project than techniques and tools. The finished product is what your plans must be geared towards. Remember that simplicity is key and will allow you to work hard without overdoing the piece.

TIP! If you are working on a large piece that will need clamping, you will need to use a large clamp. If you do not have any, try getting a pipe clamp.

You can make accurate cuts by choosing to use a drafting square. Accuracy can be a problem when you are working with pieces under two or three feet. Carpenter squares need to be fastened to one edge, and drywall squares are often inaccurate. The best tool to use, however, is a drafting square, which you can find at an art store. Such squares are easy in use and surprisingly accurate.

Painter’s tape is an essential tool that many forget to have in their workshop. It helps make a straight line and reduce splintering. You can also use it to keep glue from setting on the outside of the wood.


With this knowledge at the ready, you can tackle any wood project now. By keeping at it, and learning something additional on a daily basis, soon enough your skills will allow you to create more complex projects. Use this advice to help you.

Business meets nature