You should always test stain on a small area or on a wood scrap. This can help you avoid surprises in case your stain color is different after you’ve applied it. You never know how wood will behave, so do the test first.

TIP! If you are going to be staining your project, test on a scrap of wood or an inconspicuous area. By doing this, you can prevent unwanted surprises in the event that the stain color turns out differently than you expected.

Woodworking requires many different skills. Working with wood can create a variety of beautiful items. If you wish to get into it, this article was written for you. The tips in this article are a great place to begin any woodworking journey.

It is a good idea to keep a small ruler in your pocket, but you may find it falls out when you bend over because of the length. To reduce this problem, you could get a metal ruler and put the ruler in the same place as where you store your magnet. The magnet will keep both objects securely in place.

TIP! It is handy to carry a small pocket ruler, but it may fall out whenever you bend over. Make it a metal ruler and store it alongside your telescoping magnet.

If you are going to be staining your woodworking project, use a pre-stain conditioner on the wood. If you use a pre-stain conditioner, you will be less likely to notice any blotches or irregularities in your finished project. These applications even out the stain on the wood.

Do you want to tighten a screw but don’t have space to fit the screwdriver and your hand? Your toolbox contains the answer. Get out your 12 point socket and a screwdriver. Put the socket on the screwdriver, and then put it on a good ratchet.

TIP! Do you have screws that are out of reach that need tightened, but you can’t fit a screwdriver or your hand in the area? This is where your toolbox comes in handy. Just grab a 12-point socket set.

Use the right wood for your project. When woodworking, there are some woods which can’t handle the stress other woods can. If you haven’t been working with wood for long, take the time to educate yourself on the wood.

Your work area should be well lighted. Woodworking requires a degree of accuracy. Light is also a safety issue since you’ll be working with sharp tools. These things require that your space be adequately lit for safety.

TIP! Your workshop needs to be well lit. Woodworking requires a degree of accuracy.

Ask the rental company for a speedy tutorial when renting a tool you aren’t completely familiar with. There are usually specialists available to get you comfortable using the tool more quickly than learning it by yourself. Also ask for a pamphlet if they have one.

Make sure you aren’t neglecting to talk to other people. It is likely that your shop is in an isolated place away from others. You’re still going to get stuck or stumped on different projects. Use other woodworkers as a support team to help answer your questions or even to help generate ideas. It’s likely there are others with your question too.

Tin Snips

Use woodworking kits when you’re just getting started. You can find kits that come with some pre-cut pieces. You can then assemble the pieces to create your project. They offer a great way to begin developing your woodworking skills. This will help you save money going forward because it shows you how to avoid costly mistakes.

TIP! If you are new to woodworking, consider beginning with a woodworking kit. These kits will come with wood that is pre-cut that you need to start putting together to make your project.

Trim laminate by using tin snips. You can cut effortlessly and quickly with tin snips. You should buy tin snips that you will use specifically for cutting laminate to make sure they stay sharp.

Be aware of furniture that people are discarding. You can find wood for free that can be reused. Consider what you can do before you dismiss anything. Even if the dresser isn’t able to be fixed, you may be able to arrange the drawers into a good bookshelf.

TIP! Keep an eye out for discarded furniture. Many times you can spot decent wood furniture at reduced prices or even free.

To find some great deals on low-cost tools for woodworking, get your tools on auction sites or at yard sales. This is a great way to find good deals. This will save valuable cash, especially if you are new to the hobby or are needing to quickly replace a broken tool.

When sanding, don’t apply too much pressure. Sanding while using pressure will make a surface less even because you’ll be gouging the surface. If you’re using the right sand paper grit, the pressure should not matter. Also, try to use a circular motion to create a smooth texture.

TIP! When you’re sanding a project, be sure you’re not applying too much pressure. Using pressure while sanding can make the surface uneven.

Stair gauges make great circular saw guides. Normally a woodworker uses a stair gauge to ensure each stair has an identical rise. Although you can still use them on carpenter square tongues to be a helpful guide when using a circular saw.

Make your own sanding block. Although sanding blocks provide you with more control while sanding, this doesn’t mean you should spend a lot on sandpaper holders. Use scrap wood to make it. Cut a scrap of wood for each grit of sandpaper, spray with adhesive and apply your sandpaper.

Drafting Square

Before staining, you always want to do a spot test. There may be unforeseen problems, and the results may not be what you had in mind. Testing it will allow you to change things. This makes less work for you in the end.

TIP! Try out your proposed wood stain on a spot that will not show on the finished piece. The stain might come out blotchy or off color.

Using a drafting square can help your accuracy when performing smaller cuts. When cutting wood from afar (two to three feet in range), it may be very tough to be accurate. Carpenter squares need to be fastened to one edge, and drywall squares are often inaccurate. Instead, stop by your local art supply store for a drafting square. They are accurate and easy to use.

Plan what you’re doing with your wood on a piece of paper before starting. By writing everything down and considering a budget in advance, projects stay manageable. It is much more efficient to know how much wood you’ll need at the beginning. Plan well in advance, and it’ll be a much smoother ride.

TIP! Use pen and paper to plan what wood pieces you’ll need or use. Writing down your budget and blueprint allows you to control the process.

Always go back over your measurements. Triple checking couldn’t hurt either, especially if the materials you are using are particularly expensive. Measuring is often where the most costly mistakes occur. An error in length or angle can destroy the wood you needed for your project.

You can make your own custom sized sanding blocks. Just cut your wood to the shape and size needed for your particular job. Use a spray adhesive to attach your sandpaper to your block of wood. Then you’ll have a sanding block that you can use for this job that’s the perfect size.

TIP! Did you know that you can actually create your own sanding blocks and custom-size them too? Just cut a piece of wood into the size you require. Use adhesive to apply the sandpaper to your block, then let it dry.

Avoid getting your extension cords all tangled up while working with wood by using just one extension cord. Take a moment to unplug the last tool you used and then plug in whichever one you need next. This easy tip for woodworking will avoid tripping hazards, and diminish your electrocution risks.

Save the scrap wood you have for later projects. You don’t know just when you’re going to need a tiny wood piece to fill a gap. Tiny wood pieces can also assist you in practicing cuts when you have a new tool.

TIP! Save wood scraps because you might be able to use them on different projects. You can always use a tiny piece of wood for filling in small gaps or clamping together glued wood pieces.

Always plan the pieces of wood you will need before you begin a project. This will help you to have more control of your project. It is much more efficient to know how much wood you’ll need at the beginning. Proper planning will keep the project going smoothly.

Consider changes you might want to make in the future when you plan big projects. If you are building a structure, will you be adding utilities down the road? Make sure you have plenty of room to add some wires, switches and electric outlets in case you decide to extend your electrical system to your shed.

TIP! It is important to make room for future alterations when building a big project. For instance, you might be building a shed, you might wish to add electric before long.

Spend some time on watching woodworking programs on TV. You may discover new ideas or learn shortcuts that you can apply to your projects. If you’re not sure where you can discover such programming, just look through your television listings.

When purchasing tools, always choose high quality ones. A tool that isn’t made well is going to break and cause your project to have a set back. Sturdy tools cost more, but will last much longer. This saves money over time because you will not need to replace your tools frequently.

TIP! Purchase tools that are made extremely well. Low-quality tools are more likely to break, which will be a huge pain in the middle of a project.

Be aware of every step you’ll need to make prior to starting your project. When you are not prepared, you are more apt to make stupid mistakes, like cutting the wrong length of wood. Instead, read over any directions multiple times to ensure you completely understand the steps you must take.

If you’d like to begin a project with a technique or tool you are unfamiliar with, practice first. Get some scrap wood and start the project. If you mess up, simply try again until you figure things out and can start for real.

TIP! Always do a trial run when working with a new technique or tool. You could, for instance, work on some scrap wood until you become comfortable with the technique or the tool.

You can turn woodworking into a career if you continue to build your skills. These tips are meant to jump start your interest in woodworking or push you to do even better. This is a skill that lasts a lifetime. Have fun.

Your table and skill saws should have sharp blades. Most accidents in the woodworking shop happen because of dull blades. That dull blade can make the wood you are working kick back or splinter. This can hurt you to the point you can’t work with wood any longer. Also, make sure drill bits are extremely sharp in order to get the best results.

Business meets nature