If you need to stain a project you’re working on in woodworking, then you should use a stain conditioner first. Using this conditioner will reduce the amount of blotching or unevenness on your finished project. This is because the conditioners allow stains to penetrate evenly.

TIP! You can make your own reusable sanding blocks. You will need three-quarter-inch plywood cut into six blocks.

No matter where you’re at on the planet, you can find things that are made from wood wherever there are people. Woodworking is the creation of wonderful products from simple pieces of wood, which people admire. It woodworking is something that appeals to you, review the advice in this piece to get started.

If you plan to use stain, test it on a small scrap of wood first. If you test the stain color first, you will not have any unpleasant surprises. Wood tends to be unpredictable, so avoid disappointment and mistakes by doing a simple test.

TIP! Try using a stair gauge as a crosscut guide. Clamp them on the carpenter’s square.

Safety is the most important aspect of a project. Wear safety equipment and always use tools the correct way. Don’t ever remove the guards from your power tools; they are in place for your protection. These simple things can help protect you from accidents.

Select the appropriate kind of wood for your projects. When it comes to woodworking, some woods can not handle the stresses that other woods can. Take the time to learn about different types of wood and the qualities each of them has.

Stain Conditioner

Sturdy footwear is essential when woodworking. There are a lot of wood chips and nails that you will need to navigate through. You always want to protect yourself from stepping on a nail, or some other item that can cause harm in the work environment. Your footwear needs to be up to the job of protecting your feet in a woodworking environment.

TIP! Having a few beers while you build a few things may seems like an ideal way to spend your weekend. It’s not the best idea, though, to add alcohol to sharp tools.

Before you stain your wood project, apply a pre-stain conditioner onto the wood. A pre-stain conditioner helps keep away any irregularities or blotches in the wood. These conditioners help the stain penetrate evenly and keep the wood smooth.

You don’t want to use just any wood for your projects. Think carefully about the right kind of wood for what you’re making. Never use softer woods like pine for the tops of tables, as it tends to scratch. Different types of wood will have a different color once they have been finished.

TIP! Keep on the lookout for friends that are selling their house. Learning woodworking may give you the skills to increase the value of that home at the time of resale.

You can make your own reusable sanding blocks. Start by cutting six blocks from scrap 3/4″ plywood for every sandpaper grit you generally use. Cut them to 2.5″ by 4.75″. Use spray adhesive on both the cork tile square and your blocks. Put one block on the cork, and then cut it flush with a knife. After spraying adhesive on a sheet of sandpaper, place it on the block face of each cork. Cut the sandpaper so it aligns with the cork and do not forget to label your blocks.

Keep your eyes peeled for furniture going to the trash. These pieces are often very inexpensive or are given away for free. Think of what you can do with these pieces in your shop before you dismiss buying them. If you look at a dresser and think that it is good for nothing, you may be able to transform it into a bookshelf.

TIP! You can make a sanding block cheaply. You will gain more control when sanding and it is cheaper than buying the manufactured version.

Before staining your project, test the stain in a hard to see area, or, better yet, on a piece of scrap wood of the same type. This will help you to pick the right stain color for your project. You never know how wood will behave, so do the test first.

Watch some woodworking shows that are on television. You may discover new ideas or learn shortcuts that you can apply to your projects. Check your local TV listings for these types of programming.

TIP! Do not throw out your wood scraps as they can be useful later. It could be useful because you don’t know what could happen later on in your project when you’ll need extra wood to help you out.

Stair gauges make good crosscut guides. To use, clamp the gauges to a carpenter square. Then use a pencil to mark the notches. Putting them both on the carpenter’s square’s tongue will make an excellent guide for your circular saw.

Think ahead when you take on large woodworking projects. If you want a shed build, do you want electric in it later? If the answer is yes, plan for it now by making sure there is enough room for switches and wiring to be installed later.

TIP! There’s no need to go overboard with the tools and materials needed for woodworking. Buying in bulk can result in extra material that will never be used.

Were you aware that your workbench height makes a difference in your quality of work? You can find it by measuring the how far it is from the floor to your waist. This is how tall your bench should be.

Skills saws and table saws should always have sharp blades. Dull blades can lead to accidents. Kick backs happen when your blade is dull. Both are major causes for shop injuries. Also, make sure your drill bits remain razor sharp.

TIP! When using your circular saw alongside a straight edge, write down the measurement that goes from the shoe to the blade to the shoe’s edge. Write it on an address label to make it easier to read.

When you are cutting narrow pieces of wood, never use your fingers to guide them. Use a strip of wood instead to maximize safety. This will prevent you from loosing a finger or two, which would make working with wood very difficult.

Always use a clamp when you are going to be gluing wood pieces. This can keep the wood in place and let the glue dry. Clamps can be purchased in all different sizes and shapes, so make sure you have the right type. It’s possible you will need various clamps for your project.

TIP! Follow all instructions for your project. Don’t take any shortcuts, the steps are there for a reason.

Don’t simply buy one-size-fits-all nails for your woodworking projects. If a nail is too big around, it could cause the wood to split. However, very small nails do not penetrate well; therefore, they won’t hold the wood. The right size nails are crucial for having a successful project.

Always create a pilot hole before attempting to bang a nail into a piece of wood. A drill bit that is a little smaller in size than the nail should be used to hold the nail in place. Tap the nail gently until the wood holds it and then use a straight motion to hammer it home.

TIP! When you want to try screwing through wood, a pilot hole must be drilled through it first. If you don’t already have the hole in place, the screw will spin out of control and destroy the wood.

Remember to protect your ears. A wood shop can be extremely noisy. This can impact the quality of your hearing over time. You can buy disposable plugs for your ears, or get a good pair of headphones. Make sure you wear them when working with woodworking tools.

Try to remember the true source of your wood. Do not take for granted the tree from which the wood was spawned. Be efficient when you make cuts so that a lot of materials don’t get wasted and can be used for what you’re working on.

TIP! Try to avoid rushing while working on your project. Always take the time to study your plans.

Have you ever had trouble reaching certain screws using just you hand the the screwdriver? Have a look in your toolbox. Grab a 12-point socket and your long-handle screwdriver. Use the socket to place on a screwdriver, and then attach it to a ratchet.

Woodworking involves more than the right tools and techniques. You should always keep the final product in mind while working on your project. Resist the urge to overly complicate your piece.


Whether you are a beginning woodworker or not, you should always read and understand your plans before staring your project. Make sure they are complete without any missing information. If something is confusing you or you aren’t sure if it needs to be corrected, head to a local hardware store for additional help.


Woodworking is not necessarily easy. Woodworking requires know-how, talent and commitment. Using the information from this article and woodworking sites, you’ll learn how to it with much more ease. Take this information to boost your skills, and learn all that you can about

woodworking. That way, you will be more successful in your woodworking.

Business meets nature