Understand your budget’s limitations. A lot of times, your eyes can be way bigger than your budget when you do woodworking projects. Do not get excited about a project before making sure you have enough money to get everything you need. Write down the costs beforehand so you can see if it fits within your budget.

TIP! When you want to cut narrower sections of wood, never use your own fingers to guide them. Instead, use a piece of scrap wood to safely push the lumber through your table saw.

Woodworking is a skill that must be gained over time. It may seem really difficult to start, but with practice the world is wide open. Education is the key to becoming a great woodworker. You must learn the best woodworking tips and then diligently apply all that you learn. Keep reading to find out more about working with wood.

All woodworking shops need stair gauges. Typically, they are used for the layout of stair jacks, but they can also be used to clamp down the carpenter’s square. This adds a very practical element to your project that can save time and money. This square will make sure your cuts are straight each time.

Your work quality can be effected by how high your workbench is. Measure from the floor to your waist. This is the best height for a workbench.

You want to keep your ears protected when woodworking. Woodworking machines make a lot of noise. In fact, staying in one without ear protection for long durations can lead to hearing loss. Use headphones or ear plugs you can throw away. Make sure you wear them when working with woodworking tools.

TIP! You should work in a well lit area. Woodworking is something that requires you to know how to measure accurately.

Never use your fingers when guiding the cut of a slim piece of wood. Instead, push the pieces through your saw with a long strip of wood. That keeps your fingers intact.

Take the necessary safety precautions when you have the table saw out. When cross cutting, making sure you set the cut length with a block clamped to the fence. This is safer and prevents board movement. Using this clamping method still leaves the end of the board free to be cut.

Particle Board

To be able to complete a woodworking project you will need a variety of hand tools. The first item should be a high-quality hammer. In particular, a claw hammer should work well for what you want to do. Select one that feels comfortable in your hand. Don’t pick one which is very heavy.

TIP! Whenever you are sanding something, there doesn’t have to be a lot of force applied. If you sand with pressure, you can wind up with an uneven surface from gauging.

Get a handle on how a wood takes to staining prior to choosing a wood for a project. You’ll want to look for paint-grade or stain-grade woods, depending on your desires for the project. When it comes to veneer and particle board, veneer doesn’t usually absorb the right amount of stain, and particle board absorbs way too much. Getting the right wood helps ensure your project turns out the way you expect.

Test any stain on a spot that is inconspicuous. The stain could come out not looking like you expected it to, or there may be problems with your stain that you hadn’t thought about. Testing it out in an area that will not be seen can help you know if you need to change it. This also means you will have to work less.

TIP! Plan on paper before starting a project. When you take the time to write down your materials, you can analyze your costs before you begin and have more control over you budget and project.

Don’t simply buy one-size-fits-all nails for your woodworking projects. A nail that is too large in diameter will often split the wood, causing it not to hold properly. On the other hand, a nail that is too small will not penetrate and hold the wood together. It is important to choose the right nail for the job.

A couple of key power tools ought to be present before you start woodworking. You need a jigsaw, a circular saw, a power sander, a small table saw, and an adequate drill or driver. Any power sander works better than hand sanding, but get an orbital sander if possible.

TIP! Watch TV shows about woodworking. These shows offer you tips and tricks along with visual how-tos.

Sturdy footwear is essential when woodworking. Where you’re working there will be tools, nails, and wood pieces everywhere. Stepping on a nail can really hurt your feet! The shoes must be tough enough to endure your work environment.

Take the time to figure out a solid budget for each project. Find out how much materials will cost you. Know exactly what you’re going to need and how much it costs. If you don’t go into your project understanding the costs, you may run out of money half way through.

TIP! Don’t throw out scrap wood, it may prove useful in the future. Wood can be used in many different ways, and it is even useful to help fill in a gap when necessary.

Don’t be a perfectionist when using tape measures. You can work into a cut by using a story stick. There’s always time to practice a cut on scrap first. Having variety in the ways you can cut will stave off boredom.

When undertaking a major project, always consider any future alterations you may have to make. For instance, if you are planning a shed, will you want electricity later on? Allow room for wires, switches and fixtures, if this is the case.

TIP! Don’t buy too much material whenever you are shopping for a project. When you have too much, you might not use all of it, so buying everything in bulk could mean that you have too much to store.

Always make sure your work area has amply lighting. Accurate measurements are essential in woodworking. Additionally, you’ll be using sharp instruments to cut the wood. These activities mean that you must see properly to avoid mistakes and injury.

Know that a fly cutter can be very dangerous. Paint the tips of the fly cutter with fluorescent paint. This way they are easier to see and stay clear of, making the work much safer.

TIP! You do not need to buy all new tools to get started with woodworking. Rather, ask family or look for Freecycle and other groups to find out if anyone has tools they can give you.

Look out for old furniture getting thrown out. Often, people give away furniture just to get it out of their home. Stop to think about other prospects before pushing aside what you’re seeing. Even if the dresser is too short, your drawers can be arranged on the sides into an artsy bookshelf.

If woodworking is something you’re just starting with, try buying damaged wood, scrapped wood, or wood that’s cheap. While learning woodworking, you are likely to make mistakes so you need to practice a lot. It would be a waste to use high-quality wood to practice on.

TIP! When devising a shop that used for woodworking, know how the shop will be used. You want to avoid having so much stuff in the space that you are limited in your ability to move around.

Refrain from using too much pressure when sanding your wood. Pressure can cause you to get uneven results, or might gauge the surface. If you use sand paper of the correct grit, you should not need to apply a lot of force. Sand with the grain of wood and lightly.

Keep power cords as high as possible. It’s better to be able to plug in tools from hanging sockets or even pole-mounted sockets. If the cords are on the floor they can cause you to trip. You don’t want to bend over to plug things in either.

Stair Gauge

Painter’s tape is an often forgotten, but is an important tool needed for a workshop. It reduces splintering and helps you cut a straight line. It’s also good for when you use glue on your wood.


If you need a circular saw guide, try using a stair gauge. Normally a stair gauge is used to match the rise and the run of a stair jack so you can match up the notches. Use them along with a carpenter square to guide your saw.


For smaller cuts, a good tool is the drafting square. If you must make a cut in the 2-3 foot range, measuring accurately can be tricky. Squares can be cumbersome and inacurate. A drafting square is the solution in this situation. Such squares are easy in use and surprisingly accurate.


Keep your patience levels high. Some people get mad when their project doesn’t come together like they plan. The finished piece is in that wood, you just have to let it out. Be patient and stay focused on your work. Soon enough that project you’re working on will be finished!


As stated earlier, woodworking is accessible to all. You must become educated on the fundamentals of it, and practice what you’ve learned. Apply these tips when working with wood to become a great woodworker.

Business meets nature