If you need to stain a project you’re working on in woodworking, then you should use a stain conditioner first. The benefit of using a conditioner is that it will help the stain to go on evenly, ensuring the best results possible. The conditioners will help smooth out the wood and facilitate even staining.

TIP! Determine the best wood for your project. When woodworking, there are some woods which can’t handle the stress other woods can.

If you’re just starting out with woodworking, this article is perfect for you. Certain tips can help you master the art of the trade. Read the following information to learn more about woodworking.

When you are making a budget, remember to itemize every new tool that you plan to get. Some people miss this step and their budget is quickly blown. However, if you have to get tools that you do not have, this can break your budget.

TIP! Inquire about tutorials on tools that you are renting. Many times, they have specialist that can give you some great instruction.

If you are going to be staining your woodworking project, use a pre-stain conditioner on the wood. By using these products, you are likely to avoid blotching or imperfections in the final product. It will also help to improve the appearance of the wood itself, as wood has a natural grain and the conditioner fills it in to some degree.

Consider doing a dry fitting of your pieces before you use glue to join these together. If you try to adjust things after the glue has been applied, there is a huge chance that you will end up causing some damage. Dry-fit will help you realize what goes where.

TIP! Increase the strength of your grip. You might require the use of a spring clamp at times, but you may only be able to use one hand.

Stir finishes or stains before using them. Ingredients may have settled onto the bottom as they sat on the shelf. However, shaking can cause bubbles, and things may not mix properly. Stir for at least five minutes so that everything is even.

Never stick with tape measures alone. Story sticks are good to use, and you can slowly work up to your cut. Making your cuts first on scrap wood will help you try out a fitting before you move to that final cut. Using different ways to plan cuts keeps things interesting.

TIP! If you are a woodworking novice, always look over your plans before starting a project. Be sure you understand them so that you are not missing anything important.

Dry fit your project together before beginning to glue. You don’t want any surprises when you do actually have to apply the glue. You’ll be prepared. Doing a dry-fit gives you a chance to see how everything will go together when you apply glue.

To find some great deals on low-cost tools for woodworking, get your tools on auction sites or at yard sales. You may just be surprised at how much money you can save on gently used or new tools this way. This will save valuable cash, especially if you are new to the hobby or are needing to quickly replace a broken tool.

TIP! When setting out on a new woodworking endeavor, the best thing you can do is pick out the right wood for the project. Don’t use pine for things like table tops because it scratches easily.

Ear protection is important. Woodworking equipment can be very noisy. Exposure over time can mean you lose some of your hearing. You can get throwaway ear plugs or you can buy expensive headphones. Be sure that whatever you pick out is used when you’re trying to operate machinery.

When you least expect it, something may go flying into your eyes. You should always wear your safety glasses while working. Make no exceptions and then you’ll always be protected. Invest in a pair of eye goggles that fit well and provide clear vision.

TIP! When sanding, don’t apply too much pressure. When you put pressure on your wood while sanding, you can create an uneven surface.

Be sure to wear solid, closed-toed shoes when pursuing woodworking projects. When you are working with wood there are all sorts of hazardous objects that can land on the floor. You must protect your feet. Injuries like kicking something heavy or stepping on nails are quite common. If you are not confident that your shoes are adequate protection you should definitely invest in a better pair.

Create a reusable sanding block. Although sanding blocks provide you with more control and are easier to handle, you shouldn’t purchase expensive sandpaper holders. Make it yourself with scrap plywood. Cut a scrap of wood for each grit of sandpaper, spray with adhesive and apply your sandpaper.

TIP! Drafting squares are ideal for making accurate, small cuts. When cutting wood from afar (two to three feet in range), it may be very tough to be accurate.

You may enjoy drinking a beer while you are doing woodworking. It’s not the best idea, though, to add alcohol to sharp tools. Don’t work on anything if you are drinking. Also, never take any major drugs prior, whether they are prescription or illegal.

Watch woodworking shows that air on television. They can be useful and help you come up with projects on your own. Take a look through your TV guide to discover what channel and when these types of programs tend to air.

TIP! Make sure you know what kinds of steps you have to follow if you wish to get your project completed correctly. This will reduce the chances for error.

Choose the right wood for the job. Soft woods like pine will scratch easily, so it is not the best choice for surfaces that will see a lot of use. Additionally, consider different types of woods offer different colors.

Wear tight or well-fitting clothes when working with your power tools. One loose shirt can lead to disaster. Keep your shirt tails tucked in and make sure you don’t have dangling jewelry. Wear boots with a steel toe to keep your feet protected.

TIP! You may want to look into renting your tools rather than buying them. If you are considering buying a new tool, rent it a couple of times to see if you actually need it.

Always be on the lookout for people that are tying to sell a home. You can use improved woodworking skills for hobbies, additional income or even boosting resale value of a home. Your potential projects could range from simple mailbox posts to entire kitchen renovations.

Keep dust at a minimum in your woodworking area. Hardwood dust is the most dangerous, but all dust can be a danger hazard. Even dust from soft woods can cause allergies or irritation with very little exposure. Keep your mouth, eyes, nose and skin protected at all times.

TIP! Most people consider a table saw as the most important piece of equipment in a woodworking shop. This is a great method of arranging the shop.

You should have a few essential tools before you start working with wood. The first tool you get is going to be a hammer. Just a simple claw hammer will do nicely. Get one that feels good when you hold it. It should not be excessively heavy.

Invest in a Shop Vac to help you clean up after your work day. This kind of vacuum can clean up wood chips and things like dust particles. To clean your tools, use a dust brush. Use a small vacuum to clean up any sawdust.

TIP! Keep your shop organized and ventilated. Be sure you have a well lighted working area with safety tools like a fire extinguisher.

Make your own reusable sanding block. They allow you to sand a piece easily and effectively. Scrap plywood can be turned into a fine holder. You can use these to create sandpaper as well.

Where did your wood come from? A beautiful tree once held this wood. Don’t waste any wood by remaining efficient and cutting pieces of the appropriate size.

TIP! Don’t rush through your project. Study your plans carefully.

Measure twice and cut once is an old adage that should be followed. When using expensive materials, be on the safe side and triple check. Measuring is where a lot of people make mistakes. If you cut in an angled fashion or too short, you might ruin wood altogether.

Dovetail joints are pointless if people can’t see them. This being said, not everything is going to look great even if these joints can be seen. Glue might be your best bet, so don’t get too complex.


Do not build a tangle of extension cords, just stick to one when woodworking. You can only use one tool at a time, so just unplug the one you no longer need. Then you can plug in the one you need. This will keep you safe from tripping.


As you may have already figured out, there is more to woodworking than meets the eye. Fortunately, the tips you have learned here can help you with that. The next step is to continue learning and put what you learn to use.

Business meets nature