Safety is important when working with wood. Always start a job with the proper safety gear and follow instructions for using the tools properly. Never take the guards off the power tools that you use. The guards are there to keep you safe. You could get hurt if you do this.

TIP! Make sand blocks that you can reuse. Cut 6 blocks from scrap wood in the size of the sandpaper you use.

Woodworking is a skill that many people desire. No matter how good you are at this craft, there is something everyone can learn to help improve their skills. Below you will find tips from the experts that will enable you to increase your woodworking skills.

When using stains or finishes, be sure to stir them, rather than shake them. Some of the ingredients tend to settle as time goes on. Shaking can cause bubbles which can negatively impact your results. Be sure you stir it up until your mix is dispersed correctly and in a smooth manner.

TIP! Opt for gel stains when staining furniture. Liquid-based stain often runs on application, and gel stains stay put much better.

Safety is the most important aspect of a project. Always purchase the necessary safety equipment to avoid injury. Guards on power tools are provided for your protection so leave them alone. The last thing you want to do is end up at the emergency room because of an accident.

When cutting a narrow wooden piece, do not use fingers like guides! Instead, use a piece of scrap wood to safely push the lumber through your table saw. This makes sure that you won’t chop off a finger.

TIP! You should do a dry fitting before you apply glue and try to piece woodworking pieces together. If you try adjusting things post-gluing, there’s a big chance that you’ll damage something.

Stir your finishes or stains rather than shaking them. Stir often because these stains settle over time. Shaking can cause bubbles and lead to uneven mixing. Make sure that you stir it thoroughly until the sediments are smoothed out and blended evenly.

Avoid being a perfectionist about tape measures. You are sure to find how useful story sticks are. You can always also just work into a cut gradually. Cut on scrap wood initially; this allows you to try out a fitting. Planning out a variety of cuts for your project will help prevent mental boredom.

TIP! Drinking some beer while woodworking may seem like fun. This is not a good idea and can impair your judgement.

Have a budget before beginning any woodworking project. It is quite common to be far more ambitious than the budget allows when working on a particular project. It’s disappointing to be halfway through a project only to learn that you’re too far over budget to finish. Create a budget before you start so that this never happens.

Always talk with other woodworkers. Most woodworking shops do not have access to the Internet. You may find yourself confused or at a loss on a given project. Look for other woodworkers and ask them questions. You’ll never run into a problem someone else hasn’t posted about before.

Gel Stains

Watch for people getting rid of furniture. You can often find wood furniture available quite inexpensively, if not free. Always review your options before deciding. Perhaps the drawers of an otherwise unusable dresser can be used to create a unique bookshelf.

TIP! You can make your own custom sized sanding block. To make sanding a lot easier on your fingers and to give you better control of the sandpaper, you should use a sanding block; however, you do not have to purchase an expensive one.

Gel stains are something that you can get a lot of use out of when you’re staining items that are going to be used for furniture. Gel stains attach to wood better, as liquid stains run. Also, gels are thicker so they will remain consistent during the entire application process.

Before you start sanding, wet the surface that you are about to work on. This will cause the grain to show itself. This gets rid of small scratches. This makes your final product look better. It might also save you work in the future.

TIP! Double check every measurement. In fact, you may even want to triple check them if you are using expensive materials.

Never guide wood through a table saw with your fingers. Instead you should use a thin and long strip of wood get push it through your saw. This will ensure that you keep all ten of your fingers, which are all necessary for you to continue working with wood.

There are a couple power tools you need to be effective while working with wood. Get a drill, power sander, small table saw, jigsaw, and a circular saw. While an orbital sander would be ideal, any power sander will do.

TIP! Watch TV shows about woodworking. They can be a great source of useful information, as well as can give you ideas about projects that you likely have never considered before.

Keeping a small ruler inside one of your pockets is a great idea, but it could fall out due to its size. Get yourself a ruler made of metal and put it in the pocket where you store your telescoping magnet. The magnet keeps both objects firmly in your pocket.

If you want to start a project which uses a new tool or technique you have never used before, do a practice run first. Get some scrap wood and start the project. Using scrap wood allows you to practice until you learn a new technique.

Golf Tee

When you are new to woodworking, try only getting cheaper woods, maybe even looking specifically for damaged woods or even scraps. Your initial days of woodworking are going to mean a lot of trial and error. You won’t want to waste your money to practice.

TIP! Use your wood clamps properly when gluing wood for woodworking projects. Proper use of a clamp will secure your wood so that the glued pieces can dry correctly.

You can simply fix some hinges with a golf tee if you are working on an interior door. Take the door off its hinges, then remove the hinges themselves, then tap the tee into the screw hole. Trim the excess wood and put the door back into place. The screw will be able to bite into the golf tee.

When it comes to a workshop, the table saw can be the core of the whole set up. That’s a great way to design your area. Buy a good table saw. While it is okay to skimp when purchasing other tools, you should splurge when it comes to buying a table saw.

TIP! If possible, hang power cords up high in the shop. It’s better to have a place to get tools plugged in that’s hanging or mounted on a pole.

Stay safe when using a table saw. If you are crosscutting, use a clamped block to mark the cut length. This is better than using the fence alone because that can cause the board to spring back. And, it will keep the board free for cutting.

Don’t rush through any of your plans when working on your next project. Take some time to study them. It’s best to know them inside and out before beginning. Do one thing at a time to make sure your project ends up like it should.

TIP! You need some large clamps to let glue set on a large piece. If this is something you don’t have, think about purchasing a pipe clamp.

Enjoy your yard more thanks to your woodworking abilities. You can build a great deck, and a bird feeder, as well. This will reduce the insects that you have in your yard, as well. If you are a professional craftsman, offer to meet clients at your home or shop to show off your work.

Painter’s tape is a very important tool to have on hand. It reduces splintering and helps you cut a straight line. It’s great for protecting wood from overflowing glue, as well.


Are any of your friends, co-workers or family trying to sell their house? Woodworking skills can actually help provide a bit of profit, as your home will become more valuable because of them. Your potential projects could range from simple mailbox posts to entire kitchen renovations.


Use woodworking kits when you’re just getting started. Kits come with pieces already cut. That helps you finish a project without having to cut them yourself. When you are trying to grasp the fundamentals of woodworking, this is a fantastic way for you to get started. The practice saves you money on supplies and wood since you won’t make that many mistakes.


It is not surprising that the art of woodworking has been around forever. Those who are good at it can really benefit from their skills. Whether a professional or just a hobbyist, you should have gained something from reading this article.

Business meets nature