Use a pre-stain wood conditioner before applying a stain. Using this conditioner will reduce the amount of blotching or unevenness on your finished project. They will make the wood smooth and allow the stain to go on evenly.

TIP! Reusable sanding blocks made by yourself will save money. To do this, cut six blocks of wood from scrap plywood that is 3/4″ in diameter for each sandpaper grit.

Woodworking is an acquired skill. Although it seems incredibly difficult to a novice, with proper training you can become an amazingly skilled woodworker. The key to developing your woodworking skills is education. It is important to put into practice the tips that you learn. The following article will delve into the tips and techniques associated with this craft.

Do not use fingers as guides when you cut narrow wood. It is a better idea to use a long, narrow piece of wood as a tool to guide it through the blade. This technique helps protect your fingers from injury.

Spray Adhesive

You should have at least a working knowledge about the most common woods and their characteristics. Each type of wood has different traits. Stains can look different on various types of wood. They will splinter in different ways, based on how you cut. You will also see different types of grains. Each of these things should be considered before starting your next woodworking project.

TIP! You should check the condition of your blade before you start sawing. Dull blades make work harder, plus they are a safety hazard, especially on power saws.

Make your own reusable sanding blocks. To do this, cut six blocks of wood from scrap plywood that is 3/4″ in diameter for each sandpaper grit. Be sure that the measurements are around two-and-a-half inches by four-and-three-quarters inches. Spray adhesive on your blocks and also the cork square tile. Stick a block on the cork and cut it flush with a knife. Spray adhesive on your sandpaper, and then stick it to every cork block, facing down. Finally you can cut the sandpaper so it’s flush with the cork and then you can label each block.

It is often helpful to increase the spring in your grip. Do you need to apply a spring clamp with a single hand? Opening these with only one hand can be difficult. There is a method for making things a bit simpler. Prior to beginning a glue-up, put all necessary clamps on a scrap of wood. They will be handy to grab with one hand as you need them.

TIP! If you are just starting out in woodworking, consider using kits. All the wood has been pre-cut for you in these kits and it is your task to simply put them together.

Before you commit stain to wood, it is usually a good idea to test out the stain in an unseen area of the wood first. Then, you can stay away from any surprises if the stain looks differently after application. Wood can be unpredictable, so you can avoid mistakes and disappointment by doing this simple test.

There are several important hand tools you need before starting a woodworking project for the first time. A hammer is obviously a must-have item. A great hammer that you should use with woodworking will be a claw hammer. When choosing a hammer, opt for a hammer that feels comfortable in your hand. Don’t choose a heavy hammer.

TIP! Do not apply too much pressure when sanding wood. Using pressure as you sand may cause the surface to become uneven.

Stir your paint and stain, don’t shake it! The ingredients in these can settle over time. However, shaking can cause bubbles, and things may not mix properly. Stir until everything is dispersed smoothly and evenly.

A great circular guide is a stair gauge. Usually a stair gauge can be used in combination with stair jacks so the notches can be matched up. But, when they’re used on a carpenter square tongue, they make for an efficient guide.

TIP! Test any stain on a spot that is inconspicuous. There may be unforeseen problems, and the results may not be what you had in mind.

Never use your fingers like a guide. Instead, use a long, thin strip of wood to push the piece through the saw. This keeps your fingers safe, which of course are vital for living as well as the continuation of your wood working projects.

Always plan the pieces of wood you will need before you begin a project. Writing down your budget and blueprint allows you to control the process. You’ll be more efficient if you know just how much you will need of all of your materials. Proper planning will keep the project going smoothly.

TIP! A couple of key power tools ought to be present before you start woodworking. A good drill, a jigsaw, power saw, table saw and power sander are good investments.

Understand the characteristics of the woods you’re using. No two pieces of wood are alike. All the trees react differently to the stains. The cuts could differ in splintering and effects. You will also see different types of grains. You need to factor all of this into your project.

It is possible to make customized sanding blocks. Start by cutting the wood in the shape and size that you would like. Use a spray adhesive to attach your sandpaper to your block of wood. You’ll end up with a perfectly sized sanding block.

TIP! Be sure your wood is well prepared to absorb stain before you apply it. A good way to accomplish this is to use wood conditioners.

Make sure to use the right nails. Too large of a nail can split your wood, resulting in it not holding properly. A small nail, however, won’t be able to join the wood together. You need to know how to choose just the right size to suit the project.

Think about potential changes when you plan substantial projects. If you are planning on turning your shed into a workshop, ask yourself if you will need electric outlets in the future. Allow room for wires, switches and fixtures, if this is the case.

TIP! You should not ever work with power tools or saws while wearing loose fitting clothing. Lots of accidents have happened because of this type of clothing.

Use your woodworking talents to create a great yard area. You can build a bird feeder along with a nice deck to watch the birds from. The birds you attract should keep the insects from bugging you while you relax and plan out your next project. If you do professional woodworking, try and meet clients on your deck so they see your work firsthand.

Watching woodworkers may be the easiest way for you to learn the craft. Look up tutorial videos online. The video will give you a complete visual overview of the whole project.

TIP! Check lumber for any hardware, such as screws or staples, before you cut it. This may seem to be a silly process; however, it is one that you should do.

Keep your eyes peeled for furniture going to the trash. Many free wooden pieces of furniture can be had free, or dirt cheap. Take a moment to consider possibilities before dismissing anything. Even if the dresser is too short, your drawers can be arranged on the sides into an artsy bookshelf.

If you can’t seem to remember the measurements, jot down the measurements on your saw blade. Do this on both blade sides. If you have a hard time reading it, add a new label and write on it.

TIP! Consider renting tools before buying them. You can try out the tool when you rent it to see if you like it and if you actually need it.

You don’t know when something will fly toward your eyes. So don’t think that you shouldn’t wear goggles or else you may end up injuring your eyes for good. Make sure that your goggles fit properly.

If you are a beginning woodworker, don’t spend a lot of money on tools. Explore online groups like Freecycle and ask people you know if they have extra ones. You may find that you are able to adequately stock your shop at no cost to yourself.

Drafting Square

When you’re trying to drive nails into wood, you should create what is known as a pilot hole before getting started. The drill bit should be smaller than the size of the nail, then position the nail in the hole. Hit the nail into the hole until it stays, and then use the hammer to put it fully where you want it.


A drafting square helps you make accurate cuts. If you need wood that’s 2′-3,’ it may be difficult to measure it accurately. Squares can be cumbersome and inacurate. Rather, buy a drafting square from an art supply outlet. They’re accurate and easy to use.


Everybody can learn the art of woodworking. It is important to understand the fundamentals of the trade. When you use the information you learned here, you are going to be on the path to being a master woodworker.

Business meets nature